Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 45 for “"Dynamometer Testing"”.
-
Dynamometer Testing and Characterization of Switched Reluctance Motors (SRMs) for Electrified Powertrains
… The motor is experimentally tested using a dynamometer machine. A test plan is presented which tests the motor at a wide speed and torque range suitable for EV applications. The testing procedure attempts to segregate the motor losses similar to international standards for induction machines …
-
COMPARATIVE ANALYSIS OF EFFICIENCY AND OPERATING CHARACTERISTICS OF AUTOMOTIVE POWERTRAIN ARCHITECTURES THROUGH CHASSIS DYNAMOMETER TESTING
… POWERTRAIN ARCHITECTURES THROUGH CHASSIS DYNAMOMETER TESTING" was completed through a collaborative partnership between Michigan Technological University and Argonne National Laboratory under a contractual agreement titled "Advanced Vehicle Characterization at Argonne National Laboratory". …
-
Reliability of isovelocity dynamometer testing of four movements of the shoulder and shoulder girdle in persons with spinal cord injury
… examine the reliability of using an isovelocity dynamometer for the testing of four movements of the shoulder and shoulder girdle in participants having a spinal cord injury. Ten people with quadriplegia and ten people with paraplegia participated in the study. The movements being tested included …
-
A simulation method and laboratory brake friction dynamometer for tribology studies
… can be assessed through laboratory brake dynamometer testing and evaluation. In the current study, a wear testing simulation and an inertia laboratory brake dynamometer were developed to resolve differences in wear rates of brake materials. Dynamometer testing was conducted to verify the …
-
Numerical Heat Transfer Simulations of Brake Discs under Dyno-Test Load Cases
… dissipation. Yet, conventional laboratory dynamometer testing remains costly and time-consuming. To address this challenge, this study establishes a reliable CFD methodology to simulate and visualize complex aerothermal behavior before physical dynamometer testing, enabling evaluation even …
-
Multi-Speed Gearboxes for Battery Electric Vehicles: Modelling, Analysis, and Drive Unit Losses
… gearbox modelling, empirical traction machine testing, and analytical drive unit loss evaluations. The study utilizes two distinct automotive-grade electric machines – an axial-flux permanent magnet synchronous machine and an interior permanent magnet machine, the latter coupled with a …
-
Development of a Hybrid Vehicle Powertrain Test Laboratory
… tested a fully functional eddy-current chassis dynamometer testing facility on campus. An automotive test facility requires a systems engineering approach to install, calibrate and commission a chassis dynamometer. This thesis shows that, the dynamometer test facility was successfully installed, …
-
Development and control of electrified axle (eAxle) powertrains for all-terrain heavy-duty vehicles
… sizing, is proposed and validated through dynamometer testing. This is demonstrated by focusing on a 27-tonne 6x6 vehicle as a case study to determine the eAxle’s tractive effort requirements for one of the possible vehicle applications. A novel weight transfer-based approach is used for …
-
Efficiency Estimation of Induction Machines with Limited Measurements
… efficiency estimation from no-load uncoupled testing, which can be used in refurbishment centers to estimate the efficiency of induction machines without performing expensive dynamometer testing.
-
Development of a high efficiency dilute gasoline engine
… implemented to protect the second engine. Engine dynamometer testing was conducted on the second engine in single Diesel injection pulse operating mode and resulting emissions and fuel consumption data were compared to stock engine performance information. Testing of HEDGE operation was not …
-
Effects of artificial neural networks characterization on prediction of diesel engine emissions
… performed on a 550 hp General Electric DC engine dynamometer-testing unit at the West Virginia University Alternative Fuels, Engine and Emissions Research Center. The 3-Layer and Jump Connection networks were the most promising architectures and it was found that the radial basis functions such as …
-
Experimental Evaluation of JP-8-Based Fire Resistant Fuels
… by Luna Innovations to a final set of five FRF. Dynamometer testing was used to determine peak power of the supplied Yanmar 2V750 engine. Fuel fire resistance characteristics were defined and compared using a rotating disk anti-misting characterization system. Fuels were characterized based upon …
-
In-line, Real-time Particulate Matter Sensors for OBD and Exhaust After-treatment System Control Applications
… principle. Next, examine the sensor in engine dynamometer experiments under controlled environment, and sampling from test vehicles during chassis dynamometer testing aimed at real-world like test conditions. Finally, the sensor was installed on vehicles while operated on the road over diverse …
-
A parametric study of knock control strategies for a bi-fuel engine.
… to control knock during gasoline operation. Dynamometer testing was performed on a 1.9 liter Saturn{dollar}\\sp\\circler{dollar} engine to provide empirical data for model calibration and to evaluate the effects of proposed changes on engine emissions. Tests were conducted with a compression …
-
Design of a brace to quantify valgus knee stiffness: pilot testing in an ovine knee
… knee stiffness in humans while walking. Current testing methods, including in vivo dynamometer testing or ex vivo mechanical testing, exclude factors such as muscle forces and reflexes in weight-bearing environments. Quantifying dynamic stiffness could identify the presence or severity of knee …
-
Torque Vectoring Control for Optimal Energy Usage in Electric Racecars
… with experimental data from vehicle and dynamometer testing. The experimental methodology covered relevant aspects for useful testing with FSAE vehicles for torque vectoring control. Data gathered from simulation and experiments demonstrated improvements in lap time and energy …
-
Characterizing hydrogen-diesel dual-fuel combustion in a commercial heavy-duty vehicle
… most existing studies are based on engine dynamometer experiments under idealized steady-state conditions, leaving gaps in understanding the constraints of real-world operation and implementation. This study addresses these gaps through an experimental investigation of a retrofit H₂DF …
-
Development of an Artificial Neural Network to Predict In-Use Engine Emissions
… engine emissions is developed based on engine dynamometer and in-use data acquired at the West Virginia University Center for Alternative Fuels, Engines, and Emissions. (WVU CAFEE). The model accounts for the effects of road grade on generated emissions; a need for this model is evident in …
-
Effects of midsole cushioning stiffness on Achilles tendon stretch during running
… 10km times less than 40 minutes completed two testing sessions. Two footwear conditions were evaluated and consisted of a stiff and compliant midsole. Session one determined the moment arm of the Achilles tendon using dynamometer testing. Session two was a treadmill running session where …
-
A comparison of bi-directional disc brake rotor passage designs
… particularly for high performance applications. Dynamometer testing showed that respectable increases in braking performance are achievable with relatively simple machining modifications. Tuft and smoke visualization techniques provided a preliminary understanding of the airflow in the passages …
Page 1 of 3