Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"E-modulus"”.
-
Continuous monitoring of deformability of stabilized soils based on modalidentification
… meet design requirements. In this context, the E-modulus is one of the most important properties for design of structures that involve stabilized soils. There has been a recent proposal of a technique termed as EMM-ARM (Elasticity Modulus Measurement through Ambient Response Method), which allows …
-
Ocular biomechanics of the anterior segment
… internal ocular pressure (MIOP). The dynamic E-Modulus was found to be most affected by MIOP change. To investigate the in vivo distribution and heterogeneity of the corneal biomechanics, a novel set-up allowed the mapping of corneal biomechanics across the cornea using the CST (central, …
-
Preparation and characterization of magnesium calcium-aluminate, calcium boro-aluminate and related glasses as potential high strength fiber
… fiber materials with potentially high Young's modulus have concentrated heavily on aluminate glasses and in particular on calcium aluminate glasses because these glasses have a unique combination of mechanical and thermal properties among the glass forming systems. The purpose of this research …
-
CONTROLLABILITY OF ELECTROSPINNING AND ELECTROSPRAYING - ADVANCES AND APPLICATION
… the elasticity of the fibrous membrane from an E-modulus ~19 MPa for random fibers structure to ~2 MPa for patterns fibers with buckling morphology and does not affect the tensile strength. The E-modulus is further reduced to ~1 MPa by exposure to cell culture medium in order to model the cell …
-
Continuous characterization of stiffness of cement-based materials: experimental analysis and micro-mechanics modelling
… in regard to the evaluation of the E-modulus of concrete. However, the most widespread methods still present limitations/complexities which make them inadequate for the wider intents mentioned above. Thus a new experimental method called EMM-ARM (Elasticity Modulus Measurement through …
-
Durability and fatigue performance of a typical cold-curing structural adhesive in bridge construction
… In both dry and wet environments, the tensile E-modulus developed almost independently of the adhesive’s curing degree, in contrast to the tensile strength, which however converged to similar values within the investigating times despite differences in the glass transition temperatures. A 30% …
-
Contact Mechanics and Adhesion of Polymeric Soft Matter Particles in Aqueous Environment
… (CP). Here, a non-linear increase of the elastic modulus (E-modulus) from 10 to 190 kPa was determined while the shell thickness increased from 10 to 24 µm. After adding a second shell, a further gain to 520 kPa on average can be realized. Furthermore, a new concept was developed by Mr. Fery and …
-
High-performance and self-compacting concrete in house building. Field tests and theoretical studies of possibilities and difficulties
… utilisation of increased tensile strength and E-modulus) and also increase the building function (increased flexibility, acoustic and indoor air quality). When it comes to technical and building process related obstacles for the implementation of HPC and SCC, these are analysed and described …
-
The Laboratory Evaluation of Bio Oil Derived From Waste Resources as Extender for Asphalt Binder
… is not statistically significant; 2) the dynamic modulus of some of the bio oil modified asphalt mixture were slightly lower than the control asphalt mixture, the E* modulus is also not statistically significant; 3) most of the bio oil modified asphalt mixture had higher fatigue lives than the …
-
Επίδραση ορυκτών πρόσθετων παραπροϊόντων βιομηχανίας στη διάβρωση του οπλισμού σκυροδέματος
… of static and dynamic Elastic modulus,X-ray Diffraction,Microscopic observation of concrete under Scanning Electron Microscope (SEM),Observation under digital Stereoscope,From this thesis resulted in the following conclusions:1.The replacement of cement by EMD waste, decreased …
-
Poly(limonene carbonate): Composites and Copolymers
… and with improved mechanical properties. The E-modulus (E = 2.1 ± 0.19 GPa) and the elongation at break (εbr = 28 ± 9.3%) are increased significantly by the addition of 7.5 wt% EtOL. Higher amounts of EtOL (> 7.5 wt%) do not result in improved mechanical properties. The optical properties of …
-
Mechanical and Adhesive Properties of the Cellulosic Seed Mucilage and its Role in Seed Dispersal
Plants have evolved diverse seed structures and properties that aid in their dispersal and protection from environmental influences. One widespread trait among thousands of flowering plants is myxodiaspory, or the ability of seeds, fruits, and diaspores to form mucilaginous coats upon hydration. In …
-
SYNTHESIS AND MECHANICAL PROPERTIES OF IN-SITU AL-TIB2 COMPOSITE
… as high as 224 and 171MPa respectively and a E-modulus value of 91GPa. These values are comparable to the performance of a similar composite synthesised by the other aforementioned techniques. Modification of the matrix with an addition of 4.5wt. %Cu further increased the tensile and yield …
-
Correlation between Morphology and Mechanical Properties of Polystyrene-b-Polybutadiene-b-Poly(methyl methacrylate) in Dependency of the Polybutadiene's Block Microstructure.
… the molar masses of SBMs are high. The tensile modulus and stresses at break were mainly affected by the nature of glassy domains of the polymers as well as the 1,2- B content. However, the effect of B isomers on the stresses at break is moderately low. A strong influence of the ratio of the …
-
Soy-Polypropylene Biocomposites for Automotive Applications
… are promising. An increase of the E-modulus was observed when compared to pure polypropylene. The addition of MA-PP as coupling agent increased the yield strength of the biocomposites. When pure polypropylene and the biocomposites were compared no difference could be seen for their …
-
The effects of drawing polyethylene in the solid state on crystallographic, morphological and mechanical properties
… HDPE samples showed a great increase of modulus with draw ratio (10 GPa for natural drawn, 25 GPa for superdrawn). The density, crystallinity and melting temperature measurements also increased with draw ratio. These changes are interpreted as an increase of order in the structure of HDPE …
-
On the Characteristics and Growth of Biominerals
… nicht mit Nanohärte (4-4,5 GPa) und E-Modulus (50-80 GPa) korrelierbar ist. Die Nanhohärte von Seeigelstacheln liegt deutlich höher als bei anorganisch gebildetem Calcit (3.0 +/- 0.2\,GPa), während deren E-Moduli ähnlich sind (70 +/- 5\,GPa). Diese Arbeit untersucht erstmals die …
-
Electrospun Nanofiber Reinforced Composites: Fabrication and Properties
… mechanical properties like tensile strength, E modulus, elongation at break and toughness. The enhancement was achieved without sacrificing the transparency of TPU by just using very small amounts (even as small as 0.4 wt%) of nylon-6 nanofibers. Section 2.3 and 2.4 focused on the initial …
-
Novel dual setting approaches for mechanically reinforced mineral biocements
… such as elasticity, compression strength and E-modulus of a composite with 30 wt% NCO–sP(EO-stat-PO) were found to be similar to the properties of cancellous bone. With the motivation to develop a dual setting and resorbable cement, a brushite (CaHPO4·2H2O) forming cement was modified with a …
-
A multi scale approach to the study of lime-cement mortars in masonry
In masonry constructions, the choice of mortar composition is usually guided by requirements of the final application, which could range from new constructions to conservation projects. Often, lime and cement are combined, to overcome their shortcomings and consequently serve as a suitable binder …