Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"EMI reduction"”.
-
EMI Reduction Using Symmetrical Switching in an Application with an Unshielded Wire between the converter and the load
An EMI reduction technique using two MOSFETs instead of a single MOSFET in a Buck converter has been investigated in this thesis. A circuit that implements this technique was designed, constructed on a surface-mounted technology printed circuit board and tested. The designed circuit is made up of …
-
An electromagnetic interference analysis of uninterruptible power supply systems in a data processing environment
The levels of Electromagnetic Interference (EMI) generated by two standard models of Uninterruptible Power Supplies (UPS) were examined. Conducted current measurements were made on all conductors exiting and entering two standard UPS units between the frequency range of 60-Hz up to 50 MHz. EMI …
-
COMMON MODE VOLTAGE ELIMINATION IN THREE-PHASE FOUR-LEG INVERTERS UTILIZING PULSE DENSITY MODULATION
Common mode (CM) electromagnetic interference (EMI) is a phenomenon that negatively affects power electronics to include voltage source inverters. Typically, CM EMI reduction is achieved through passive measures such as CM chokes and passive filters. This thesis research explores removing the need …
-
The radiation physics, mitigation approaches and design guidelines of high-speed connectors and cables analyzed with numerical modeling, analytical formulation and measurements
… Design guidelines of high-speed connectors for EMI mitigation are proposed based on the analysis of radiation physics.In the third paper, the 2D finite element method (2D FEM) is developed to analyze electromagnetic interference (EMI) reduction when magneto-dielectric absorbing materials are …
-
High Power Inverter EMI Characterization and Improvement by Auxiliary Resonant Snubber Inverter
Electromagnetic interference (EMI) is a major concern in inverter motor drive systems. The sources of EMI have been commonly identified as high switching dv/dt and di/dt rates interacting with inverter parasitic components. The reduction of parasitic components relies on highly integrated circuit …
-
A Smart Gate Driver IC for GaN Power Transistors
… including tight restriction on the gate voltage, EMI and reliability issues due to the large dv/dt and di/dt slew rates, the precision timing control, etc. In this thesis, an integrated smart gate driver IC with segmented output stage topology, programmable sense-FET, current sensing circuits and …
-
Technologies for Improving Performance of Indoor Dimmable Light-Emitting Diode (LED) Drivers
… taking place in lighting technology, light-emitting diode (LED) becomes the new promising light source for the future world. In the recent years, indoor application becomes the new battlefield for the industry, so higher price-performance ratio is the key in today and future LED lighting …
-
A high-voltage multi-purpose on-the-fly reconfigurable half-bridge gate driver for GaN HEMTs in 0.18-μm HV SOI CMOS technology
… also allows for electromagnetic interference (EMI) reduction, which is important in safetycritical applications. A uniform structure of half-bridge switching units is proposed, enabling reconfigurability in the operation of the system with a variety of possible topologies, out of a large array …
-
High-Frequency Oriented Design of Gallium-Nitride (GaN) Based High Power Density Converters
… increased electromagnetic interference (EMI) in the gate loop and the power stages, the lack of the modules of packages for high current application, high gate oscillation under parallel operation. The dissertation is developed to addressed the all the challenges above to fully explore …
-
Control, Analysis, and Design of SiC-Based High-Frequency Soft-Switching Three-Phase Inverter/Rectifier
… capacitance and to improve the CM noise reduction performance. The soft-switching ac-dc converter built with the final PCB magnetics features almost similar efficiency compared to that with litz-wire inductor and 14 to 18 dB CM noise reduction up to 15 MHz. Lastly, the soft-switching …
-
Digital enhancement techniques for fractional-N frequency synthesizers
… bandwidth, the electromagnetic interference (EMI) is dramatically reduced. A conventional PLL clock generation approach suffers from a slow frequency settling and limited spread spectrum modulation capabilities. The proposed open loop fractional divider architecture overcomes the bandwidth …