Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Earthquake engineering -- Research."”.
-
A study of the dynamic performance of a shaking table
… shaking table studied in this thesis is in the Earthquake Engineering Research Laboratory at the University of British Columbia. The theory of closed-loop feedback control systems is used as a basis for the study. A mathematical model of the shake table control system is developed using the …
-
Risk-Based Performance Assessment of a Seismic Retrofit Technique for Medium- and High-Voltage Transformer Bushing Systems
… systems have exhibited vulnerability during past earthquakes. The enhanced performance of bushings mounted on rigid base observed during shake table testing does not correlate well with their performance in the field. It is suspected that the seismic performance of high voltage bushings is …
-
Development of a Performance-Based Procedure for Assessment of Liquefaction-Induced Free-Field Settlements
… perhaps the most promising is performance-based earthquake engineering, a framework presented by the Pacific Earthquake Engineering Research (PEER) Center. The PEER framework incorporates probability theory to generate a comprehensive seismic hazard analysis. Two settlement estimation methods are …
-
Development of a Performance-Based Procedure to Predict Liquefaction-Induced Free-Field Settlements for the Cone Penetration Test
… from severe infrastructural damage, after an earthquake occurs. The ability to predict, and design for, these settlements is crucial to prevent extensive damage. However, the inherent uncertainty involved in predicting seismic events and hazards makes calculating accurate settlement …
-
Development of a Simplified Performance-Based Procedure for Assessment of Liquefaction Triggering for the Cone Penetration Test
… and loss and is a serious concern in civil engineering practice. One method for evaluating liquefaction triggering potential is a risk-targeted probabilistic approach that has been shown to provide more consistent and accurate estimates of liquefaction risk than traditional methods. This …
-
Development of a Simplified Performance-Based Procedure for the Assessment of Liquefaction-Induced Settlements Using Liquefaction Loading Maps
… the amount of settlement that may occur after an earthquake is crucial to seismic design. The Pacific Earthquake Engineering Research (PEER) Center developed performance-based earthquake engineering (PBEE) as a probabilistic framework to characterize the risks associated with a seismic event. When …
-
Probabilistic Performance-Based Hurricane Engineering (PBHE) Framework
… of structures subject to hurricane hazard. This research develops a probabilistic Performance-Based Hurricane Engineering (PBHE) framework for hurricane risk assessment. The proposed PBHE is based on the total probability theorem, similar to the Performance-Based Earthquake Engineering (PBEE) …
-
Decision tree based seismic retrofit selection for non-code conforming reinforced concrete buildings
Pacific Earthquake Engineering Research (PEER) Center has developed a comprehensive framework for quantitative assessment of performance level of structures. The framework relies on integrated work of four consecutive stages to provide probabilistic description of system level performance in terms …
-
In-plane shake table testing of gravity load designed reinforced concrete frames with unreinforced masonry infill walls
… elements. However, lessons learned from past earthquakes and from several tests performed have shown that those walls tend to interact with the bounding frame when the structural system is subjected to moderate or severe earthquake ground motions. The first part of an experimental testing …
-
Development of a Simplified Performance-Based Procedure for Assessment of Liquefaction Triggering Using Liquefaction Loading Maps
… and is a serious concern in current civil engineering practice. Several methods are available for assessing the risk of liquefaction at a given site, each with its own strengths and limitations. One probabilistic method has been shown to provide more consistent estimates of liquefaction …
-
Development of a Simplified Performance-Based Procedure for Assessment of Post-Liquefaction Settlement Using the Cone Penetration Test
Earthquake-induced liquefaction can cause severe damage to infrastructure is a serious concern in civil engineering practice. Post-liquefaction settlement is one of the common effects of liquefaction. The ability to predict and quantify post-liquefaction free-field settlement is a crucial part of …
-
A Performance-Based Model for the Computation of Kinematic Pile Response Due to Lateral Spreading and Its Application on Select Bridges Damaged During the M7.6 Earthquake in the Limon Province, Costa Rica
… historically been one of the largest causes of earthquake-related damage to infrastructure. One of the infrastructure components most at risk from lateral spread is that of deep foundations. Because performance-based engineering is increasingly becoming adopted in earthquake engineering …
-
Shake table testing of an Oak Street Bridge bent model
… as-built condition on the shake table at UBC's Earthquake Engineering Research Laboratory. The prototype bent was scaled to 0.27 size, and the dead load was incorporated as a mass block attached to the cap beam. The specimen was instrumented internally with strain gauges on some longitudinal and …
-
Simplified Performance-Based Analysis for Seismic Slope Displacements
… over the years as a result of the effects of earthquakes. One of these devastating effects is slope failure, more commonly known as landslide. Over the years, seismologists and engineers have teamed up to better record data during an earthquake. As technology has advanced, the data obtained …
-
Performance-Based Wind Engineering of Tall Buildings: Nonstationary Wind, Loading Protocol and Nonlinear Response
… cost. The development of performance-based wind engineering (PBWE) for tall buildings benefits significantly from the seismic performance assessment framework advanced by Pacific Earthquake Engineering Research (PEER) center and ATC-58 project (FEMA P-58), consisting essentially of hazard, …
-
The return period of soil liquefaction
… is one of the most damaging effects of earthquake shaking. Current methods of predicting liquefaction have proven to be effective for a given intensity of earthquake shaking but, because they consider only a single intensity at a time, their ability to communicate total liquefaction …
-
BIM-Based Seismic Loss Assessment for Instrumented Buildings
A look at the most devastating earthquakes ever reported, emphasizes the essentiality of forecasting earthquake-induced loss of buildings with predictable seismic performances. This perspective is mostly adopted in performance-based earthquake engineering (PBEE) loss assessment frameworks. The …
-
Machine-learning-based models, methods, and software for intensity, vulnerability, and risk assessment of Central U.S. induced earthquakes
… there has been an increase in the number of earthquakes in the Central U.S. from an average of 25 per year in 2008 to 365 in 2017. These earthquakes can adversely affect the safety of infrastructure in the region, considering most were designed with minimal to no seismic detailing …
-
Seismic Behavior of Tall Rocking Mass Timber Walls
… in the 2-5 story range is gaining popularity in research and in building projects around the world, little research has been completed for these systems in the 6-20 story range. To demonstrate the resilient capabilities and validate the use of code alternative design procedures for these systems, …
-
Modelling the rocking dynamics of objects with irregular geometry
Free-standing objects are all around us. Computer monitors and towers, bottles, kitchen containers, museum artifacts, tables, chairs, and medical equipment are just a few of the objects which may be prone to rocking and toppling due to external forcing or support excitation. Many objects with …
Page 1 of 2