Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"Edge Crack"”.
-
The edge crack-tip behavior of nitinol
… stress, σM [subscript f]. Placing a crack on the edge of a nitinol plate causes stress concentrations at the base of the crack. These high stresses in turn cause a change in the elastic modulus in a region around the crack. To determine this region, an analytic model of the elastic …
-
On the Thermal Stresses Due to a Uniform Heat Flow Past a Circular Hole With a Radial Edge Crack
… of an insulated circular hole with a radial edge crack. By superimposing a Mellin transform solution of the equations of thermoelasticity on a Michell series solution the author reduces the problem to a pair of singular integral equations which are then solved numerically. The stress …
-
ΘΕΩΡΗΤΙΚΗ ΚΑΙ ΠΕΙΡΑΜΑΤΙΚΗ ΜΕΛΕΤΗ ΠΡΟΒΛΗΜΑΤΩΝ ΡΩΓΜΩΝ ΣΕ ΣΥΝΘΕΤΕΣ ΠΛΑΚΕΣ
… OF THE EVALUATION OF THE STRESS SINGULARITY OF A CRACK TERMINATED AT THE APEX OF A BIWEDGE, WHICH IS LOADED EITHER BY PRESCRIBED TRACTIONS OR DISPLACEMENTS. IN THE FOURTH CHAPTER, THE INFLUENCE OF A CIRCULAR INCLUSION ON THE PREVAILING STRESS STATE IN A CRACKED PLATE, WHICH IS SUBMITTED AT …
-
Crack Propagation in Linear Elasticity Based on the Concept of Material Forces
… mechanics, we study the case of an existing crack in the material. In order to properly simulate the development of a crack, we need to model how fast and in what direction the crack grows in the case of propagation. In this thesis we have developed a framework for the simulation of crack …
-
Simulation of Cracks in a Cosserat Medium using the eXtended Finite Element Method
… Simulation of the fracture processes, such as crack opening and propagation, in Cosserat materials still remains a challenge for the scientific community. The goal of this thesis is to propose and validate a two dimensional extended finite element method model of edge cracks within the Cosserat …
-
A Two Parameter Approach to Elastic-Plastic Fracture Mechanics
… based on the characterisation of elastic-plastic crack tip fields by the crack tip opening displacement (C.T.O.D) or equivalently by the J-contour integral introduced by Rice (1968), and the elastic T-stress which is the non-singular term in the Williams expansion (1957). In order to establish …
-
Application of displacement and traction boundary integral equations for fracture mechanics analysis
… solution algorithm for the general mixed-mode crack in a linearly elastic, isotropic medium is presented. Traction boundary integral equations are collocated at the points on one crack surface while displacement boundary integral equations are collocated at the opposite points on the other …
-
Computation of the Crack-Driving Force in Elastic-Plastic Materials - A Comparative Study
In fracture mechanics a material force, or the crack-driving force, is defined as the energy release rate due to a small variation of the position of the crack tip. For material, that does not dissipate energy due to irreversible (dissipative) mechanisms, the material force and the classical …
-
Fatigue Damage Evaluation in Thin-Walled Structures Using Guided Waves
… are based on fundamental modes of Lamb and edge waves, which are the most suitable for thin-walled structural components, as these modes disperse rapidly over propagation distance in thick structures. In Chapter 2, the accumulation of low-cycle fatigue damage is investigated using the …
-
Design maps for fracture resistant functionally graded materials
… Functionally Graded Materials (FGMs) with an edge crack and membrane loading are considered and the resulting J-integral values are computed numerically using Finite Element Analysis. In order to capture the resulting stress fields accurately, Barsoum elements are used in the vicinity of the …
-
Continuum modeling of interface failure
… the fracture mechanics model used the virtual crack extension method on the same composite beam containing an internal crack to predict how the energy release rate was affected by reinforcing particles at the interface under the same compressive axial load. Comparing the two results to …
-
COMPUTIONAL MODELING OF PRECISION MOLDING OF ASPHERIC GLASS OPTICS
… is the second coefficient. For the example of an edge crack in a half space, converged values of the first twelve mode I coefficients (kn and Tn, n=0,...,5) have been determined, and for an edge crack in a finite width strip, the first six coefficients are presented. Coefficients for an internal …
-
The effect of the mixed mode ratio on the plastic zone size and shape and the J-integral
… mode loading of a semi-infinite plate with an edge crack in order to assess the resulting plastic zone size and shape, and to evaluate the J-integral. The theoretical approach allows the determination of the displacement, strain and stress field at every point around the crack tip for any …
-
Energy release rate in a cracked elastic-plastic solid
To predict the growth of a crack in a body, Griffith introduced, for linear elastic materials, the concept of the energy release rate. According to this concept, crack growth occurs when the work done on a body by the applied surface tractions minus the increase in the strain energy of the body is …
-
Application of photoelasticity to determine mode one and mode two orthotropic stress intensity factors
… tension specimens and a strip with a slanted edge crack are employed to determine mode one and mode two stress intensity factors. The optical and mechanical properties of the materials are determined by the use of tension specimens. A microcomputer is employed to collect and analyze the …
-
Aspects of structural design with glass
… that this is not satisfactory, and a new “Crack Size Design” method is proposed. Novel contact and fracture mechanics techniques are developed in the course of this thesis, which may also be applied to more general engineering problems. Of particular interest is the evaluation of the stress …
-
Evaluation of efficiency of partial hybrid finite element method using composite laminates with crack
… stress fields around interior delamination crack tips in composite laminates subjected to out-of-plane loading. The stress field consisting of both in-plane and out-of-plane components around a through thickness edge crack in a laminated composite under uniaxial tension is also studied. The …
-
Adhesion of a viscoelastic polymer to wet or compliant substrates
… mechanism from fingering instabilities to edge crack propagation. Influence of surface energy of soft substrate, compliance of soft substrate and debonding or retraction velocity was noted. Elastohydrodynamics was found to be the leading cause of transition of instabilities from fingering …
Page 1 of 2