Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"Edge loading"”.

  1. Modelling of Dynamic Edge Loading in Total Hip Replacements with ceramic on polyethylene Bearings

    … head with the rim of the acetabular liner (edge loading), which can lead to increased wear and shortened implant lifespan. There is a need for flexible pre-clinical testing tools which allow THR devices to be assessed under these adverse conditions. In this work, a novel dynamic finite …

    whiterose Download PDF for Modelling of Dynamic Edge Loading in Total Hip Replacements with ceramic on polyethylene Bearings (opens in a new tab)

  2. Wear in ceramic-on-ceramic total hip replacements: mechanisms and implications of edge loading

    … analysis of 54 COC bearings found posterior edge loading was a normal occurrence in THRs, while anterosuperior edge loading was associated with high wear and persistent squeaking. The architectural features of the pseudocapsules surrounding 23 of these prostheses varied in response to a …

    unsw Repository record for Wear in ceramic-on-ceramic total hip replacements: mechanisms and implications of edge loading (opens in a new tab)

  3. The Effect of Variations in Component Positioning and Swing Phase Load on the Occurrence and Severity of Edge Loading and Wear in Hip Joint Replacements

    Edge loading is multifactorial and has been identified as a risk leading to the revision of hip joint replacements. Pre-clinical testing requirements currently do not incorporate edge loading. Previous testing of edge loading has been carried out as controlled dynamic microseparation of 0.5 mm via …

    whiterose Download PDF for The Effect of Variations in Component Positioning and Swing Phase Load on the Occurrence and Severity of Edge Loading and Wear in Hip Joint Replacements (opens in a new tab)

  4. Wear and rim damage of UHMWPE acetabular cups in total hip replacement

    … a role in the failure of total hip replacements. Edge loading of hip replacements can occur where there is sub-optimal component positioning and/or joint laxity. Wear resistance can be improved by crosslinking but the manufacturing process of these materials involves post-irradiation thermal …

    whiterose Download PDF for Wear and rim damage of UHMWPE acetabular cups in total hip replacement (opens in a new tab)

  5. Modelling different mechanical damage mechanisms of ultra-high molecular weight polyethylene liners in total hip replacements

    … and unbalanced tissue forces can generate loading to the edge of liners that may limit their durability. Maintaining very low clinical rates of liner fatigue or fracture related revisions is important for maximising THR longevity. The aim of this research was to investigate the types of …

    whiterose Download PDF for Modelling different mechanical damage mechanisms of ultra-high molecular weight polyethylene liners in total hip replacements (opens in a new tab)

  6. Pseudotumours following metal-on-metal hip resurfacing arthroplasty

    … with increased wear at the MoM articulation. An edge-loading wear pattern was always found in the pseudotumour group. An in vivo study was then developed to investigate whether the edge-loading occurs during functional activities. Edge-loading in the pseudotumour group was found to occur with up …

    oxford Repository record for Pseudotumours following metal-on-metal hip resurfacing arthroplasty (opens in a new tab)

  7. Wear of hard-on-hard hip prostheses: influence of head size, surgical position, material and function

    Edge loading in hip replacement bearings may occur due to rotational and translational mal-positioning. Rotational mal-positioning is easier to detect clinically which include steep inclination angle and excessive version/anteversion angles. Translational mal-positioning encompasses …

    whiterose Download PDF for Wear of hard-on-hard hip prostheses: influence of head size, surgical position, material and function (opens in a new tab)

  8. Structural analysis of multi-layered concrete pavement systems

    … Thesis, analytical solutions for interior and edge loading are presented. The Burmister analytical solution for interior loading of a multi-layered system is expanded to the more general case of systems in which each component may be treated as a Burmister layer, or as an elastic spring bed, or …

    uiuc Repository record for Structural analysis of multi-layered concrete pavement systems (opens in a new tab)

  9. A PRACTICAL TOOL FOR THE DETERMINATION OF SURFACE STRESSES IN RAILROAD BEARINGS WITH DIFFERENT CONTACT GEOMETRIES AND LOAD CONDITIONS USING FINITE ELEMENT ANALYSIS

    … with crowned contact geometries to prevent edge loading of components. This normally results in completely elastic Hertzian contact stresses under standard railcar loads. However, under extreme load conditions, detrimental edge loading has been known to occur. It is proposed to develop a …

    vcu Repository record for A PRACTICAL TOOL FOR THE DETERMINATION OF SURFACE STRESSES IN RAILROAD BEARINGS WITH DIFFERENT CONTACT GEOMETRIES AND LOAD CONDITIONS USING FINITE ELEMENT ANALYSIS (opens in a new tab)

  10. Severe biomechanical conditions in total hip replacement.

    … could be mitigated by improved implant design. Loading of the femoral head against the edge of the acetabular component produces dramatically increased contact pressures particularly in hard-on-hard bearings. In an analysis of 16 retrieved ceramic-on-ceramic bearings we were able to characterise …

    unsw Repository record for Severe biomechanical conditions in total hip replacement. (opens in a new tab)

  11. Large Deflection of Rectangular Plates

    … illustrate the solution for various particular edge loading conditions.

    marquette Repository record for Large Deflection of Rectangular Plates (opens in a new tab)

  12. Understanding Movement and its Influence on Tribology of the Human Hip

    … Sliding distance, cross-shear, load and edge loading are important factors when determining potential wear rates at the hip. Global and local hip biomechanics were calculated for eighteen healthy subjects, completing thirteen common daily activities. Results showed variation in …

    whiterose Download PDF for Understanding Movement and its Influence on Tribology of the Human Hip (opens in a new tab)

  13. On the Failure of Total Ankle Replacement: A Retrieval Analysis

    … in the published literature, yet high rates of edge-loading (70.5%) and impingement (57%) were evident. Fixation and bearing surface wear affected 98% of tibial components. The volumetric wear rate for eight bearing inserts was 2.5 times higher than the greatest wear rate reported by in-vitro …

    whiterose Download PDF for On the Failure of Total Ankle Replacement: A Retrieval Analysis (opens in a new tab)

  14. Wear of a total ankle replacement

    … were defined based on these results and edge loading observed in retrieved TARs. One coronal malalignment condition and a 3mm translational offset were tested in the wear simulator previously developed. Rotation proved to significantly increase the TAR wear rate while displacement had no …

    whiterose Download PDF for Wear of a total ankle replacement (opens in a new tab)

  15. Development and Implementation of a Forward Solution Hip Mathematical Model to Determine In Vivo Mechanics and Predict Hip Separation

    … to in vivo hip separation, instability, and edge loading. Specifically, this includes: development of a forward solution mathematical model of the hip that incorporates detailed articulating surface geometry and patient-specific kinematics; customization of the model to accept multiple …

    utk-theses Repository record for Development and Implementation of a Forward Solution Hip Mathematical Model to Determine In Vivo Mechanics and Predict Hip Separation (opens in a new tab)

  16. Subject-Specific Musculoskeletal Modeling of Hip Dysplasia Biomechanics

    … hip muscles’ contributions to joint overloading, which could in turn interact with the abnormal anatomy to induce pathomechanics at the articular level. To verify this phenomenon, hip loading estimated from MSMs was projected to the pelvis anatomy to predict acetabular edge loading during …

    wustl Repository record for Subject-Specific Musculoskeletal Modeling of Hip Dysplasia Biomechanics (opens in a new tab)

  17. Bearing Capacity of Concrete

    … through strip, rectangular and knife edge loading pieces with base plates of different thicknesses (4 to40mm). These results were also compared with 85 available tests by other investigators. The distribution of axial stresses in the concrete and bending stresses in the steel base …

    aston Repository record for Bearing Capacity of Concrete (opens in a new tab) Download PDF for Bearing Capacity of Concrete (opens in a new tab)

  18. Inlay vs. Onlay: A Comparison of Two Glenoid Systems in Total Shoulder Arthroplasty

    … whereby the glenoid loosens as a result of edge loading of the implant during mild off-axis motion, is a common complication of total shoulder arthroplasties (TSAs). Recently, a partial glenoid resurfacing implant, known as a glenoid inlay, has become available and due to its geometry has …

    clemson Repository record for Inlay vs. Onlay: A Comparison of Two Glenoid Systems in Total Shoulder Arthroplasty (opens in a new tab)

  19. Materially Nonlinear Finite Element Analyses of Trusses and Slab-on-Grade Problems

    … test focused on the warping of floor slabs and edge loading of a warped slab. Twelve floor slabs were included in the test. The theoretical finite-element results for the slab-on-grade problem are compared with the experimental measurements. The effects of temperature and moisture gradients, the …

    odu Repository record for Materially Nonlinear Finite Element Analyses of Trusses and Slab-on-Grade Problems (opens in a new tab)

Page 1 of 2