Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 62 for “"Effective Width"”.

  1. EFFECTIVE WIDTH AND ULTIMATE STRENGTH OF CONTINUOUS COMPOSITE BEAMS.

    … criteria have been proposed to calculate the effective width at mid-span and supports, at yield and at ultimate loads. New design equations have been developed to calculate the ultimate strength of a composite section in both positive and negative moment regions. Ductility and deflection …

    arizona-thes Repository record for EFFECTIVE WIDTH AND ULTIMATE STRENGTH OF CONTINUOUS COMPOSITE BEAMS. (opens in a new tab)

  2. Effective Width of Floor Systems for Application in Seismic Analysis

    Effective width coefficients for floor systems have been developed for use in the analysis of frames subjected to lateral seismic loads. The results cover a wide range of the governing nondimensional parameters, and are applicable to floor slabs with supporting beams as well as to flat slabs.

    uiuc Repository record for Effective Width of Floor Systems for Application in Seismic Analysis (opens in a new tab)

  3. Steel Design of Plated Structural Elements - A comparison of the effective width method and the reduced

    … class 4. The methods are called the effective width method and the reduced stress method. The aim of this thesis is to investigate if the capacity varies depending on which of the two methods is used and see in what design situation one or the other method provide a higher capacity. A …

    chalmers Repository record for Steel Design of Plated Structural Elements - A comparison of the effective width method and the reduced (opens in a new tab)

  4. Parametric design of class 4 steel cross sections - A comparison between the reduced stress method and the effective width method

    … in cross section class four which is the effective width method and the reduced stress method. The first mentioned method is the most common method in Sweden and consists of a rather time consuming calculation procedure. The second method results in a rather conservative design. The aim …

    chalmers Repository record for Parametric design of class 4 steel cross sections - A comparison between the reduced stress method and the effective width method (opens in a new tab)

  5. Behaviour of Composite Beams with Ribbed Metal Deck

    … with ribbed metal deck, is presented.</p> <p>The effective width of composite beams with ribbed metal deck, subjected to uniformly distributed load, is investigated. The effective width in the inelastic stage and at the ultimate load are also studied.</p> <p>Finally, a study of the longitudinal …

    mcmaster Repository record for Behaviour of Composite Beams with Ribbed Metal Deck (opens in a new tab)

  6. Rotational Stiffness Models for Shallow Embedded Column-to-Footing Connections

    … for the blockout and the foundation slab, flange effective width, embedment depth, and effective column depth. It was determined that the model was sensitive to the subgrade reaction, modulus of concrete, embedment depth and effective column depth. The exposed length was not a highly sensitive …

    byu Repository record for Rotational Stiffness Models for Shallow Embedded Column-to-Footing Connections (opens in a new tab) Download PDF for Rotational Stiffness Models for Shallow Embedded Column-to-Footing Connections (opens in a new tab)

  7. Sandwich Plate System Bridge Deck Tests

    … lag in the half scale bridge was studied, and an effective width to be used for design purposes was determined. The effective width of the half scale simple span sandwich plate bridge deck was determined to be the physical width. Finally, supplemental research is recommended and conclusions are …

    vt Repository record for Sandwich Plate System Bridge Deck Tests (opens in a new tab)

  8. Precast concrete load bearing wall panels

    … is twinfold. Firstly, to study and check the effective width requirements recommended by different committees¹ for the design of ribbed precast concrete load bearing walls. Secondly, to rationalize the practice of the designing of the precast prefabricated components of any general polygonal …

    ubc Repository record for Precast concrete load bearing wall panels (opens in a new tab) Download PDF for Precast concrete load bearing wall panels (opens in a new tab)

  9. Comparative Design Analysis of Stainless-Steel Hollow Sections

    … Different design methods include the effective width method and direct strength method found in ASCE 8-22, effective width method from AISC 370-21 and Eurocode 1993 1-4, and the continuous strength method in both AISC 370-21 and Eurocode 1993 1-4 generation 2. Bending resistance …

    chalmers Repository record for Comparative Design Analysis of Stainless-Steel Hollow Sections (opens in a new tab)

  10. Stiffness of Coupling Slabs in Shear Wall Buildings

    … wall openings, and slab dimensions on the effective width and stiffness of the connecting slab.</p>

    mcmaster Repository record for Stiffness of Coupling Slabs in Shear Wall Buildings (opens in a new tab)

  11. Evaluating the Speed and Accuracy of Touch Input at the Edge of a Table

    … are at least 11% faster than the top face. Effective width analysis is used to model performance and provide recommended target sizes. Based on observed user behaviour, we explore top and bottom ridge crossing using a "braced" thumb and provide design recommendations with example …

    waterloo Repository record for Evaluating the Speed and Accuracy of Touch Input at the Edge of a Table (opens in a new tab)

  12. Evaluation of Passive Force Behavior for Bridge Abutments Using Large-Scale Tests with Various Backfill Geometries

    … backfills. The effects of changing the length to width ratio, or including MSE wingwalls determine passive force-deflection relationships. The purpose of this study is to determine the effects of the wall heights and of the MSE support on passive pressure and backfill failure, and to compare the …

    byu Repository record for Evaluation of Passive Force Behavior for Bridge Abutments Using Large-Scale Tests with Various Backfill Geometries (opens in a new tab) Download PDF for Evaluation of Passive Force Behavior for Bridge Abutments Using Large-Scale Tests with Various Backfill Geometries (opens in a new tab)

  13. Optimum design of cold-formed steel purlins using genetic algorithms

    … steel purlins in Eurocode 3 relies on the effective width approach. The method works by considering the strength reduction due to local plate buckling as an effective width for each element of the cross-section and to a distortional buckling as a reduced thickness for the stiffener. In the …

    aalto Repository record for Optimum design of cold-formed steel purlins using genetic algorithms (opens in a new tab)

  14. Estudo do comportamento pós-crítico de paredes esbeltas de perfis metálicos

    … compared to theoretical predictions based on the effective width method and are used to assess several design prescriptions and past propositions. The experimental investigation incluedd tests of three specimens formed by lipped channel profiles under concentric loading. Based on the experimental …

    brazil-uerj Repository record for Estudo do comportamento pós-crítico de paredes esbeltas de perfis metálicos (opens in a new tab)

  15. Development of a new design method for the cross-section capacity of steel hollow sections

    … to slender sections (class 4) for which the effective properties are used with the use of the effective width method (EWM). However, for cold-formed steel sections, characterized by a non-linear material law, the cross-section resistance can go beyond its plastic capacity due to strain …

    liege Repository record for Development of a new design method for the cross-section capacity of steel hollow sections (opens in a new tab) Download PDF for Development of a new design method for the cross-section capacity of steel hollow sections (opens in a new tab)

  16. SEMI-RIGID BEAM-TO-BEAM COMPOSITE JOINT FOR LONG SPAN COMPOSITE FLOOR BEAM

    … by the component method to which the proposed effective width and effective length are applied. In addition, this study also performed a comprehensive investigation on semi-continuous composite beams (SCCBs) including theoretical and experimental studies to evaluate their design moment and …

    nus Repository record for SEMI-RIGID BEAM-TO-BEAM COMPOSITE JOINT FOR LONG SPAN COMPOSITE FLOOR BEAM (opens in a new tab) Download file for SEMI-RIGID BEAM-TO-BEAM COMPOSITE JOINT FOR LONG SPAN COMPOSITE FLOOR BEAM (opens in a new tab)

  17. FRP-Confined Grout Systems for Underwater Rehabilitation of Corroded Steel Bridge Piles

    … American Iron and Steel Institute (AISI) (the effective width and direct strength methods), the remaining axial capacity of the tested piles was predicted and compared with the measured capacities. The findings indicate that among the methods investigated the effective width method resulted in …

    houston Repository record for FRP-Confined Grout Systems for Underwater Rehabilitation of Corroded Steel Bridge Piles (opens in a new tab)

  18. Modelling district heating and cooling : analysis of network costs and configurations for a decarbonised heat and cold supply

    … on improving one of the model parameters, the effective width, which indicates the necessary trench length. An extensive geographic analysis enabled the determination of new equations that relate effective width to several indicators of building density under a wide range of conditions. …

    lund Repository record for Modelling district heating and cooling : analysis of network costs and configurations for a decarbonised heat and cold supply (opens in a new tab) Download PDF for Modelling district heating and cooling : analysis of network costs and configurations for a decarbonised heat and cold supply (opens in a new tab)

Page 1 of 4