Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"Elastoplastic model"”.

  1. An analytical and experimental study on the onset of sand production: a poro-elastoplastic model with strain softening behaviour

    … around the wellbore drilled in poro-elastoplastic media with strain softening behaviour i.e. rock strength softening is often evident from field observations. Three failure criteria are chosen to model the plastic behaviour: Mohr-Coulomb, Drucker-Prager and Hoek-Brown. A set of hollow …

    unsw Repository record for An analytical and experimental study on the onset of sand production: a poro-elastoplastic model with strain softening behaviour (opens in a new tab)

  2. Υπερβολικό μοντέλο αστοχίας υλικών με συνοχή και εσωτερική τριβή

    … criteria.Based on this hyperbolic criterion, an elastoplastic constitutive model was also elaborated. The calibration of the elastoplastic model requires five additional parameters which are calculated from the uniaxial compression test. For the elastic response of the model, the linear isotropic …

    greece Repository record for Υπερβολικό μοντέλο αστοχίας υλικών με συνοχή και εσωτερική τριβή (opens in a new tab)

  3. Thermomechanical and dynamic behavior of surface mounted chip components

    … these two devices. Based on a static and dynamic model, recommendations on pad sizes, solder volume, and component dimensions were made. An elastoplastic model was developed to investigate the thermomechanical behavior of solder joints during thermal cycling. Parameters such as pad sizes, solder …

    texas Repository record for Thermomechanical and dynamic behavior of surface mounted chip components (opens in a new tab) Restricted access

  4. Soil testing and numerical modelling of a subsidence event

    … project soil, and to determine the constitutive model parameters. Several commonly used soil constitutive relations or models were reviewed. An elastoplastic model was determined to best represent the soil behavior. Material parameters were determined for the Drucker-Prager, Cam-Clay, and cap …

    ut-knoxville Repository record for Soil testing and numerical modelling of a subsidence event (opens in a new tab)

  5. Mechanical and Dynamical Properties of Disordered Biological Tissues as Amorphous Solids

    … fields are captured by a simple linear elastic model. Next, we show that cell divisions induce linear flow in an otherwise solid-like tissue. We develop a tensorial elastoplastic model where cell rearrangements occur as local relaxations in an elastic sheet, and we introduce cell divisions as …

    qucosa-diss

  6. Πειραματική και υπολογιστική έρευνα των εντατικών καταστάσεων και μηχανισμών παραμόρφωσης-αστοχίας υπόγειων ανοιγμάτων σε αδύναμα υλικά

    … (a) Experimental research of large-size physical models under biaxial loading (b) Simulation of the behavior mechanism using a double plastic mechanism elastoplastic model with pre-peak hardening and post-peak softening behaviour. A novel experimental approach was the extensive application of …

    greece Repository record for Πειραματική και υπολογιστική έρευνα των εντατικών καταστάσεων και μηχανισμών παραμόρφωσης-αστοχίας υπόγειων ανοιγμάτων σε αδύναμα υλικά (opens in a new tab)

  7. Modelling excavations in discontinuous rock using the distinct element method

    … >China</span><span >. A three-dimensional model (using the 3-Dimensional Distinct Element Code, 3DEC) is developed to simulate the construction of the shiplock by multi-staged excavation. The model is validated using available field data. The significance of modelling individual …

    soton Download PDF for Modelling excavations in discontinuous rock using the distinct element method (opens in a new tab)

  8. Behavior of Soils Subjected to Thermo-Hydro-Mechanical Coupled Actions

    … Also, a new and comprehensive constitutive model for soils subjected to F-T cycles is proposed. 2) Constitutive mechanical modeling of hydrate bearing sediments (HBS). An advanced elastoplastic model is proposed to capture the complex response of this type of soil when subjected to THM …

    tamu Repository record for Behavior of Soils Subjected to Thermo-Hydro-Mechanical Coupled Actions (opens in a new tab)

  9. Numerical modelling of the effects of bin inserts on stress distribution in storage bins for cohesive powder material

    … the applicability of modified Cam-clay model to the study stress distribution in storage bins. Effects of insert location, insert size, insert friction, hopper outlet size, hopper slope, and bin wall friction on stress distribution in ground feed inside storage bin were investigated …

    manitoba Repository record for Numerical modelling of the effects of bin inserts on stress distribution in storage bins for cohesive powder material (opens in a new tab)

  10. Gas permeability changes in rock salt during deformation.

    … excavations in rock salt, predicted with an elastoplastic model, are used in a model of gas permeability based on the equivalent channel model. The zone of the gas permeable rock is predicted well, but the magnitude of the gas permeability is underpredicted very near excavations. The gas …

    arizona-thes Repository record for Gas permeability changes in rock salt during deformation. (opens in a new tab)

  11. Finite Element Analysis of Sampling Disturbance in Clay Soils

    … effective stress analysis using a critical state elastoplastic model. From the analysis of the results it is shown that the rough thick walled tubes cause the greatest downdrag on samples during penetration and in general yielding of the soil initiates close to the sampler tip and propagates along …

    glasgow Download PDF for Finite Element Analysis of Sampling Disturbance in Clay Soils (opens in a new tab)

  12. Dynamic Relaxation for Initial Stress Setup and Inelastic Response of Compliant Fault Zones to the Nearby Earthquakes

    … stress field that is in static equilibrium for elastoplastic dynamic rupture models using a dynamic solver. Then we examine inelastic response of fault zones to nearby earthquakes. Our dynamic relaxation method mainly relies on a dynamic loading scheme that is applied on the model boundary. The …

    tamu Repository record for Dynamic Relaxation for Initial Stress Setup and Inelastic Response of Compliant Fault Zones to the Nearby Earthquakes (opens in a new tab)

  13. Modelling High Density Powder Compaction Using Multi-Particle Finite Element Method

    … of particle deformation, thus well suits for modelling high density compaction in which particles experience large deformation. In this work, a 3D MPFEM model was developed to investigate the structure and stress of particle compacts at high density compaction. The model was firstly developed …

    unsw Repository record for Modelling High Density Powder Compaction Using Multi-Particle Finite Element Method (opens in a new tab)

  14. The mechanics of low-areal-density fiber networks

    … across various manufacturing stages using modelling at two scales. At the macroscale, the impact of the crepe structure on tensile properties is studied with a Discrete Elastoplastic Model, where the creped sheet is idealized as a segmented triangular wave deforming via extension and …

    ubc Repository record for The mechanics of low-areal-density fiber networks (opens in a new tab) Download PDF for The mechanics of low-areal-density fiber networks (opens in a new tab)

  15. Novel and Fast Peridynamic Models for Large Deformation and Ductile Failure

    … simulating fracture and damage. While several PD models have been recently introduced for ductile failure, important limitations have been noticed. For example, some such theories are inconsistent with the classical theory, are limited to small strains/small rotations, or suffer from numerical …

    nebraska Repository record for Novel and Fast Peridynamic Models for Large Deformation and Ductile Failure (opens in a new tab)

  16. MODELING, SIMULATION AND ANALYSIS OF MULTI-BARGE FLOTILLAS IMPACTING BRIDGE PIERS

    … of this research is to develop new methods and models for predicting barge impact forces on piers. In order to generate research information and produce more realistic flotilla impact data, extensive finite element simulations are conducted. A set of regression formulas to calculate the impact …

    uky-thes Repository record for MODELING, SIMULATION AND ANALYSIS OF MULTI-BARGE FLOTILLAS IMPACTING BRIDGE PIERS (opens in a new tab)

  17. Scaling theories and simulation of ductile yielding in amorphous solids

    … parallelized numerical routines to simulate an elastoplastic model (EPM) of amorphous solids, as well the corresponding mean-field theory, I develop a scaling theory for the yielding of amorphous solids for non-zero temperature and driving rates. First, I simulate very large systems at zero …

    ubc Repository record for Scaling theories and simulation of ductile yielding in amorphous solids (opens in a new tab) Download PDF for Scaling theories and simulation of ductile yielding in amorphous solids (opens in a new tab)

  18. Spatio-Temporal Statistical Characterization of Boundary Kinematic Phenomena Observed on a Series of Triaxial Sand Specimens

    … study of probabilistic calibration of a visco-elastoplastic model representing the rheological property of sandstone. This is aimed to showcase the methodology we will apply to uncertainty quantification of modeling heterogeneous material responses in our future work.

    tamu Repository record for Spatio-Temporal Statistical Characterization of Boundary Kinematic Phenomena Observed on a Series of Triaxial Sand Specimens (opens in a new tab)

  19. Experimental and Constitutive Investigation of the Thermo-Hydro-Mechanical Behavior of Shales: A Case Study of the Colorado Clay Shale

    … into an advanced multi-yield-surface thermo-elastoplastic model. Of particular interest, the evolution of post-peak friction angle with degradation of interparticle bonding as a result of plastic strain development was modeled. A coupled thermodynamically admissible volumetric thermoelastic …

    calgary Repository record for Experimental and Constitutive Investigation of the Thermo-Hydro-Mechanical Behavior of Shales: A Case Study of the Colorado Clay Shale (opens in a new tab)

  20. Modelo constitutivo NorSand aplicado à areia de duna de Natal

    … was performed through a constitutive modeling approach. The present work aims to evaluate the performance of the NorSand model by assessing the Natal dune sand behavior under different conditions of drainage and state. NorSand is a model based on Critical State Soil Mechanics, using …

    brazil-ufrn Repository record for Modelo constitutivo NorSand aplicado à areia de duna de Natal (opens in a new tab)

Page 1 of 2