Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"Electric Discharge Machining"”.

  1. Wire Electric Discharge Machining of Curvilinear Swept Surfaces

    … and difficult-to-machine materials, mechanical machining methods exhibit severe problems with tool wear and surface integrity. To mitigate these problems, thermal material removal processes such as Wire Electrical Discharge Machining (WEDM) are being considered in the aerospace industry. …

    mcmaster Repository record for Wire Electric Discharge Machining of Curvilinear Swept Surfaces (opens in a new tab)

  2. Atomized dielectric spray-based electric discharge machining (spray-EDM) for sustainable manufacturing

    Electrical Discharge Machining is a non-traditional machining process that is widely used in the tool and die-making industry, automotive, and aerospace industries due to its ability to produce complex three-dimensional geometries with good accuracy and surface finish. Despite the aforementioned …

    uiuc Repository record for Atomized dielectric spray-based electric discharge machining (spray-EDM) for sustainable manufacturing (opens in a new tab)

  3. NANO ELECTRIC DISCHARGE MACHINING OF GOLD THIN FILMS WITH A MODIFIED SCANNING TUNNELING MICROSCOPE

    … tunneling microscope and an electrostatic discharge processes. The design and construction of the scanning tunneling microscope inside the scanning electron microscope along with the designs of the control electronics are reported. Several methods of surface modification are investigated, …

    maryland Repository record for NANO ELECTRIC DISCHARGE MACHINING OF GOLD THIN FILMS WITH A MODIFIED SCANNING TUNNELING MICROSCOPE (opens in a new tab)

  4. Determination of Wall Thickness and Height when Cutting Various Materials with Wire Electric Discharge Machining Processes

    … and web thickness affect the capability of machining thin-walled parts. Five different metals are used for the test; Aluminum 6061 T6, Yellow Brass SS360, 420 Stainless Steel, D2 unheat-treated tool steel 25-30 RC, and D2 heat-treated tool steel 60-65 RC. The small parts were cut to a 6mm …

    byu Repository record for Determination of Wall Thickness and Height when Cutting Various Materials with Wire Electric Discharge Machining Processes (opens in a new tab) Download PDF for Determination of Wall Thickness and Height when Cutting Various Materials with Wire Electric Discharge Machining Processes (opens in a new tab)

  5. Comparing the Feasibility of Cutting Thin-Walled Sections from Five Commonly Used Metals Utilizing Wire Electric Discharge Machining

    Wire Electric Discharge Machining (wire-EDM) is a non-traditional machining process. Controlled electric sparks are successively used to vaporize part of a workpiece along a programmed path in order to machine a desired part. Because there is no tool that comes in direct contact with the workpiece, …

    byu Repository record for Comparing the Feasibility of Cutting Thin-Walled Sections from Five Commonly Used Metals Utilizing Wire Electric Discharge Machining (opens in a new tab) Download PDF for Comparing the Feasibility of Cutting Thin-Walled Sections from Five Commonly Used Metals Utilizing Wire Electric Discharge Machining (opens in a new tab)

  6. Manufacturing with electric discharge machining of two-level hierarchical surfaces: experimental and computational study of the effect of roughness on the hydrophobicity of aluminum alloy surfaces

    … surface of a metallic surface processed by Wire Electrical Discharge Machining (WEDM), can result in a hydrophobic outcome during a single step. The two levels of roughness are introduced by a stochastic microscale component, created by the electrical discharges, and a sub millimeter morphology …

    greece Repository record for Manufacturing with electric discharge machining of two-level hierarchical surfaces: experimental and computational study of the effect of roughness on the hydrophobicity of aluminum alloy surfaces (opens in a new tab)

  7. Integration of CAD/CAM for manufacturing of complex shaped components using a robotic manipulator

    … value and the features of 3D-CAD in geometry, machining and drawing interchange files for Wire Electric Discharge Machining (WEDM) are analyzed and described. A simple practical set of methods in which a variety of 3D complex shape drawings suitable for WEDM could be easily created, analyzed …

    dcu Download PDF for Integration of CAD/CAM for manufacturing of complex shaped components using a robotic manipulator (opens in a new tab)

  8. IMPACT OF INJECTOR FABRICATION TECHNIQUE ON THE INJECTION AND ATOMIZATION OF JP-10 FOR HIGH-SPEED AERO-PROPULSION SYSTEMS

    … additive manufacturing, laser drilling, electric discharge machining, and platelet techniques. ANSYS Volume of Fluids-Discrete Phase Model simulations modeled the injection and atomization of JP-10 into a simulated engine environment, and the results were compared to experimental images …

    nps Repository record for IMPACT OF INJECTOR FABRICATION TECHNIQUE ON THE INJECTION AND ATOMIZATION OF JP-10 FOR HIGH-SPEED AERO-PROPULSION SYSTEMS (opens in a new tab)

  9. High throughput profile millling for the flexible and accelerated processing of electric steels

    The proliferation of electric machines has drastically increased in recent years and is likely to increase into the future. This interest in the production of advanced, high power density electrical machines that are small in size has heightened the need for flexible manufacturing processes to …

    gatech Repository record for High throughput profile millling for the flexible and accelerated processing of electric steels (opens in a new tab)

  10. The impact of conventional and wide bandgap semiconductor PWM inverter EDM bearing currents on motor bearings.

    … towards an electrified society, power density in electric motor drives must continue to increase. To this end, motor drives of the future will contain wide bandgap (WBG) semiconductor devices such as silicon carbide (SiC) and gallium nitride (GaN). The introduction of these WBG devices into motor …

    baylor Repository record for The impact of conventional and wide bandgap semiconductor PWM inverter EDM bearing currents on motor bearings. (opens in a new tab)

  11. Wide bandgap inverter duty bearings : development and lifetime prediction of conductive grease bearings with integrated graphene nanoparticles.

    … due to an increase in vibration caused by electric discharge machining (EDM) resulting from inverter-induced, high frequency bearing currents. This dissertation presents a novel method to reduce bearing currents and mitigate EDM damage by increasing the conductivity of motor bearings via …

    baylor Repository record for Wide bandgap inverter duty bearings : development and lifetime prediction of conductive grease bearings with integrated graphene nanoparticles. (opens in a new tab)

  12. Effect of Manufacturing Processes on Electrical Machine’s Performance

    … on the effects of manufacturing processes on electrical machine performance. The effects of cutting, welding, and shrink fitting are considered and the effects of cutting are studied more thoroughly in this thesis. A 37 kW induction motor is used as a test machine. A cutting loss model is …

    aalto Repository record for Effect of Manufacturing Processes on Electrical Machine’s Performance (opens in a new tab)

  13. Crack growth measurements in boron/aluminum composite laminates and related analysis

    … notched specimens. Specimens were machined using electric discharge machining.</p><p>Two direct and two indirect methods were used to measure crack growth in the specimens. The direct method utilized crack propagation gages and the optical measurement of the crack front from photographs. The …

    ut-knoxville Repository record for Crack growth measurements in boron/aluminum composite laminates and related analysis (opens in a new tab)

  14. Design, Characterization, and Control of a High-Bandwidth Serial-Kinematic Nanopositioning Stage for Scanning Probe Microscopy Applications

    … is fabricated from aluminum alloy using the wire electric discharge machining process. The performance of the positioning stage is evaluated and the measured dominant lateral resonances in the fast and slow scanning directions are 24.2 and 6.00 kHz, respectively, which are in good agreement with …

    unr Repository record for Design, Characterization, and Control of a High-Bandwidth Serial-Kinematic Nanopositioning Stage for Scanning Probe Microscopy Applications (opens in a new tab)

  15. Fatigue analysis of microstructures

    … with many microfabrication techniques, i.e. electric discharge machining (EDM), electrochemical machining (ECM), laser cutting, etching, Lithographie Galvanik und Abformung (LIGA), micro-forging etc., are also used in MEMS devices. The issue of fatigue failure becomes even more serious with …

    freiburg-diss Repository record for Fatigue analysis of microstructures (opens in a new tab)

  16. Generating nano-scale features by electro-machining using an atomic force microscope

    … various fields such as electronics and medicine; machining and fabrication of nano-scale features have gained tremendous attention. The development of cost-effective methods that are capable of writing or replicating nano-structures in a wide range of materials represents one of the greatest …

    nebraska Repository record for Generating nano-scale features by electro-machining using an atomic force microscope (opens in a new tab)

  17. Actuation Fatigue and Fracture of Shape Memory Alloys

    … material. Counter intuitively, the samples with electric discharge machining recast layer have significantly longer fatigue lives than mechanically or electro-chemically polished samples. Damage tolerant approach on the actuation fatigue results shows stable crack growth in NiTi SMAs and the rate …

    tamu Repository record for Actuation Fatigue and Fracture of Shape Memory Alloys (opens in a new tab)

Page 1 of 2