Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"Electric Field Simulations"”.

  1. 1550 nm wavelength single photon avalanche diodes: design rules of double Zn diffusion and floating guard rings for premature edge breakdown suppression in planar InGaAs/InP SPADs

    … of avalanche gain, DCR and SPDE as well as electric field simulation. The Round 1 wafers were found to be unsuitable for SPAD operation due to the non-optimal electric field profiles caused by wafer growth uncertainties. Hence, measurements and data analyses (2 D electric field simulations) …

    whiterose Download PDF for 1550 nm wavelength single photon avalanche diodes: design rules of double Zn diffusion and floating guard rings for premature edge breakdown suppression in planar InGaAs/InP SPADs (opens in a new tab)

  2. Double-Side Cooled 3.3 kV, 100 A SiC MOSFET Phase-Leg Modules for Traction Applications

    … applications. Parasitic extraction and thermal simulations of the module showed a parasitic inductance of 2.89 nH and junction temperature of 108.3 °C at a heat flux of 156 W/cm² under a typical water-cooling condition. Electric field simulations identified high electric field stress at the …

    vt Repository record for Double-Side Cooled 3.3 kV, 100 A SiC MOSFET Phase-Leg Modules for Traction Applications (opens in a new tab)

  3. Design of Carbon Nanotube Based Field Emission Facility

    … A diode configuration was employed to test the field emission performance of the CNT thin film. The current density achieved was 1mA/cm² at 10V/µm. After the initial burn-in process, a relatively steady emission current was obtained for duration of 170 hours. The control grid was made of 25% …

    waterloo Repository record for Design of Carbon Nanotube Based Field Emission Facility (opens in a new tab)

  4. Nonlinear Polymer Nanocomposite for Field Grading in Medium-Voltage Power Converters under High-Altitude and Humid Environments

    … printed-circuit boards (PCBs) at high altitudes. Electric field simulations of the triple-point (TP) region revealed strong E-field intensification at conductor-ceramic-silicone and conductor-FR4-air interfaces, leading to premature partial discharges and breakdown. To mitigate these effects, a …

    vt Repository record for Nonlinear Polymer Nanocomposite for Field Grading in Medium-Voltage Power Converters under High-Altitude and Humid Environments (opens in a new tab)

  5. Modelling multi-qubit and high-spin donor quantum devices in silicon

    … full configuration interaction and mean-field solvers. We applied these tools to two phosphorus donors positioned along different lattice orientations to investigate the exchange interaction, valley population and electron densities. We performed exhaustive iterations over all physically …

    unsw Repository record for Modelling multi-qubit and high-spin donor quantum devices in silicon (opens in a new tab)

  6. Flexible Electrodynamic Dust Shields for Lunar Missions

    … EDS represents a significant advancement in this field, offering advantages such as adaptability to complex surfaces, lightweight design, and better integration with dynamic environments. Flexible EDS devices can be integrated into spacesuits to protect astronauts while accommodating their …

    gatech Repository record for Flexible Electrodynamic Dust Shields for Lunar Missions (opens in a new tab)

  7. Design and characterisation of electrospray thrusters with high emission density

    … low-cost techniques were studied using numerical simulations and by experiments. The electric field simulations suggest that the onset voltage of a porous emitter, contrary to capillary emitters, decreases with the size of the Taylor cone on the emitter tip. Based on multiple thruster tests in a …

    soton Download PDF for Design and characterisation of electrospray thrusters with high emission density (opens in a new tab)

  8. A Double-Sided Stack Low-Inductance Wire-Bondless SiC Power Module with a Ceramic Interposer

    … Hence, the LTCC interposer provides both electrical and thermal routing and the nickel-plated copper balls replace bond wires in conventional planar power module as the electrical interconnections for the SiC power devices. On the other side, direct bond copper (DBC) substrate are used at …

    arkansas Repository record for A Double-Sided Stack Low-Inductance Wire-Bondless SiC Power Module with a Ceramic Interposer (opens in a new tab)

  9. Nano-Ionic Radiation Sensor: Materials Engineering, Device Design, and Testing

    … device designs were fabricated, and their electrical performances are presented as a function of radiation dose. Three distinct generations of devices were created, each of which has offered a different methodology for amplifying the effects determined in the film analysis. Two generations …

    boise Repository record for Nano-Ionic Radiation Sensor: Materials Engineering, Device Design, and Testing (opens in a new tab)

  10. Understanding the Role of Colloidal Particles in Electroporation Mediated Delivery

    … membrane. During electroporation an external electric field is applied across a cell membrane and it causes pores to form. These pores then allow the surrounding media containing the therapeutics to diffuse across the membrane. This technique has been specifically studied as a promising gene …

    usf Repository record for Understanding the Role of Colloidal Particles in Electroporation Mediated Delivery (opens in a new tab)

  11. Over 3 kV ultra-low leakage (011) β-Ga₂O₃ power diodes with Schottky contact engineering and high-permittivity dielectric field plate

    … electronics in rapidly emerging areas such as electric vehicle infrastructure, renewable energy grids, and AI data centers, has created a pressing need for next-generation semiconductor materials as existing silicon-based technology approaches its intrinsic limitations. Wide bandgap (WBG) …

    iastate Repository record for Over 3 kV ultra-low leakage (011) β-Ga₂O₃ power diodes with Schottky contact engineering and high-permittivity dielectric field plate (opens in a new tab)