Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Electric breakdown"”.

  1. Electric breakdown and moisture adsorption in evaporated dielectric films

    … work on evaporated films and on measurement of electric breakdown is reviewed and its relation to the present work is shown. Electric breakdown theory is also briefly reviewed. Results of measurements of the breakdown fields of dielectric films between evaporated metal electrodes are then …

    glasgow Download PDF for Electric breakdown and moisture adsorption in evaporated dielectric films (opens in a new tab)

  2. Πειραματική μελέτη της επίδρασης των διεπιφανειών στη συμπεριφορά στερεών μονώσεων του εξοπλισμού δικτύων υψηλής τάσης

    … macroscopic interfaces between the different dielectric layers and microscopic interfaces between the main insulating materials and additives that are used to optimize the electric and mechanical behavior of the insulations. Many researchers have investigated the effects of various interface …

    greece Repository record for Πειραματική μελέτη της επίδρασης των διεπιφανειών στη συμπεριφορά στερεών μονώσεων του εξοπλισμού δικτύων υψηλής τάσης (opens in a new tab)

  3. Electrical characteristics of thermally evaporated stearic acid films

    The d.c. dielectric breakdown properties of thermally deposited thin films of stearic acid (CH3, (CH2)16 COOH) have been investigated. The voltage vs. time (V-t) and current vs. voltage (I-V) characteristics were studied on test capacitors consisting of aluminum-stearic acid-aluminum. The film …

    ttu Repository record for Electrical characteristics of thermally evaporated stearic acid films (opens in a new tab)

  4. Ageing Assessment of Power Transformer Kraft Paper Insulation Using Optical Speckle

    Power transformers play an important role in electric networks. Copper windings wrapped in kraft paper and immersed in a tank of mineral oil are their main composition. Oil-impregnated paper is a very common insulator in power transforms, due to its durability and endurance. Kraft paper, a …

    manitoba Repository record for Ageing Assessment of Power Transformer Kraft Paper Insulation Using Optical Speckle (opens in a new tab)

  5. An investigation of beta-silicon carbide/silicon (100) for high temperature hydrogen detection.

    … ideal for use in electronics. Its high values of electric breakdown field, band gap and saturated electron drift velocity have attracted the attention of the semiconductor community. Although the interest in β-SiC/Si devices has intensified in recent years little focus has been given to the study …

    wvu Repository record for An investigation of beta-silicon carbide/silicon (100) for high temperature hydrogen detection. (opens in a new tab)

  6. A Physics-Based Analytical Compact Model, TCAD Simulation, and Empirical SPICE Models of GaN Devices for Power Applications

    … power electronics in consumer electronics, electric vehicle, aerospace, renewable energy is increasing and Si devices are failing to meet the demands of higher voltage, higher current, and high switching frequency efficiency.Wide bandgap devices, SiC and GaN, offer an alternative solution …

    ut-knoxville Repository record for A Physics-Based Analytical Compact Model, TCAD Simulation, and Empirical SPICE Models of GaN Devices for Power Applications (opens in a new tab)

  7. Study of nanostructures and interfaces of technological materials by means of electron microscopy techniques

    … process-CMP), with the oxide showing increased electric breakdown field values. In case (b), the 2 deg off-cut samples presented the best morphology (atomically flat) of the AlGaN barrier and GaN cap layers, despite the steps in the SiC/AlN interface, exhibiting the best electron mobility …

    greece Repository record for Study of nanostructures and interfaces of technological materials by means of electron microscopy techniques (opens in a new tab)

  8. Charge injection threshold in Lexan and Acrylite

    Bulk breakdown in dielectrics occurs when the applied electric field exceeds a critical field and the insulating dielectric becomes conducting. This breakdown event damages the dielectric by producing a permanent channel of fractal dimension inside the dielectric. The resulting conducting structure …

    ttu Repository record for Charge injection threshold in Lexan and Acrylite (opens in a new tab)

  9. Numerical simulation on fatigue behavior of ferroelectric ceramics

    The major obstacle in applications of ferroelectric ceramics is the so-called electric fatigue which refers to deterioration of piezoelectric properties under cyclic electric loading conditions. Experimental observations indicate that fatigued ferroelectric specimens usually contain a large number …

    nebraska Repository record for Numerical simulation on fatigue behavior of ferroelectric ceramics (opens in a new tab)

  10. Design and simulation of single-crystal diamond diodes for high voltage, high power and high temperature applications

    … wide bandgap, high thermal conductivity, large electric breakdown field and fast carrier mobilities. All of these properties are crucial for a semiconductor that is used to make electronic devices that can operate at high power levels, high voltage and high temperature.Two-dimensional …

    msu

  11. Defect Properties Determined by Photo-Induced Electron Paramagnetic Resonance Spectroscopy in Carbon-Doped Gallium Nitride Substrates

    … applications due to its larger bandgap and electric breakdown field compared to other well‐known semiconductors such as Si, GaAs, and SiC. High-power applications in electronic devices often require semi-insulating layers or substrates for homoepitaxial growth. However, as-grown GaN is …

    uab Repository record for Defect Properties Determined by Photo-Induced Electron Paramagnetic Resonance Spectroscopy in Carbon-Doped Gallium Nitride Substrates (opens in a new tab)

  12. Modeling and Simulation of \Sub-Microsecond Electrical Breakdown in Liquids with Application to Water

    … the inherent physics and sub-microsecond electrical breakdown of water stressed to high voltages is analyzed, and several relevant models are constructed for quantitative analysis. A bubble-based, drift-diffusion (DD) model proposed here includes almost all the important physical process …

    odu Repository record for Modeling and Simulation of \Sub-Microsecond Electrical Breakdown in Liquids with Application to Water (opens in a new tab)

  13. Optimization of Seeding Parameters for Growing Large-Scale Polycrystalline Diamond on β-Ga2O3

    … an ultra-wide bandgap of ~4.8 eV and a critical electric breakdown field of 8 MVcm-1, which has the potential to outperform the GaN and SiC based high power devices available in the market. However, the thermal conductivity of βGa2O3 is significantly low, which can drastically reduce the lifespan …

    texas-state Repository record for Optimization of Seeding Parameters for Growing Large-Scale Polycrystalline Diamond on β-Ga2O3 (opens in a new tab)

  14. Modeling the Mechanical Behavior of Soft Active Materials

    … such as pH, solvent, salt, heat, humidity, electric or magnetic field, and light. These materials are generally lightweight, inexpensive, fracture tolerant and pliable. They can be configured into various conceivable shapes and their properties can be tailored to suit a broad range of …

    jhu Repository record for Modeling the Mechanical Behavior of Soft Active Materials (opens in a new tab)

  15. Nonlinear Electromechanical Deformation of Isotropic and Anisotropic Electro-Elastic Materials

    … produce large deformations in response to an electric stimulus. EAPs have attractive characteristics of being lightweight, inexpensive, stretchable, and flexible. Additionally, EAPs are conformable, and their properties can be tailored to satisfy a broad range of requirements. These advantages …

    vt Repository record for Nonlinear Electromechanical Deformation of Isotropic and Anisotropic Electro-Elastic Materials (opens in a new tab)

  16. Performance Optimisation of Dielectric Elastomer Generators

    A Dielectric Elastomer Generator (DEG) is an electromechanical transducer, basically a highly deformable parallel-plate capacitor, made up of a soft DE membrane coated with two compliant electrodes on its opposite surfaces. This device is able to convert mechanical work, emanating from its …

    trento Repository record for Performance Optimisation of Dielectric Elastomer Generators (opens in a new tab)

  17. Growth and Characterization of (InxGa1-x)2O3, and NiO Heterostructures

    … for example, large bandgap (~ 4.9 eV), high electric breakdown field (~ 8 MVcm-1), hard radiation tolerance, physical and chemical stability in the harsh environment, as well as its suitability for mass production compared to their SiC and GaN counterparts. Pulsed laser deposited (PLD) NiO/ …

    texas-state Repository record for Growth and Characterization of (InxGa1-x)2O3, and NiO Heterostructures (opens in a new tab)

  18. Detecting Electric and Magnetic Fields from Charged Dust on Earth and Mars

    … and debris into the air. The separation of triboelectrically charged lofted<br/>dust generates electric fields of 10s kV m-1 on Earth: far below the breakdown field strength.<br/>The only terrestrial recording of the magnetic field from a dust devil peaked at less than 1 nT.<br/>OnMars, dust …

    bristol Repository record for Detecting Electric and Magnetic Fields from Charged Dust on Earth and Mars (opens in a new tab) Download PDF for Detecting Electric and Magnetic Fields from Charged Dust on Earth and Mars (opens in a new tab)

  19. Characterisation of lightning strike induced damage in CFRP laminates and components for wind turbine blades

    … anisotropic nature of the material’s thermal and electrical properties leads to large amounts of resistive heating especially in the through-thickness direction where the electrical conductivity is the lowest. The aim of this PhD is to devise a new means of assessing the damage and resulting …

    soton Download PDF for Characterisation of lightning strike induced damage in CFRP laminates and components for wind turbine blades (opens in a new tab)

Page 1 of 2