Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Electric current rectifiers"”.
-
Electrolytic rectifiers
… offered great resistance to the passage of the electric current, while as kathode, offered very little. This experiment was repeated two years later by Buff. He thought he observed that when the aluminum was used as the anode, that a dark skin formed upon its surface. This was verified by Beetz …
-
Characterization of 125-MM pulsed power thyristors
… the SPT411BHT Pulse Power Thyristor under high current situations. In addition, determine the feasibility of reducing the recovery time by removing charge carriers from the gate of the device. The second objective is to develop a method to determine the thyristor junction temperature increase …
-
Single-switch three-phase zero-current-transition rectifier with power factor correction
A novel, zero-current-transition (ZCT) topology of the single-switch three-phase boost PFC rectifier is proposed. The soft transition is achieved with a low-power auxiliary circuit employing an additional switch. The circuit can be used with an IGBT at switching frequencies up to 50. Its operation …
-
Improvements in integrated high-quality rectifier-regulators
The integrated high-quality rectifier-regulators [1] are not practical for universal input voltage and wide load range applications because of high bulk-capacitor voltage stress at lighter loads. This load-dependent characteristic of the bulk-capacitor voltage is due to the integration of a …
-
Design of a neutral point clamped power inverter
This thesis details the design, construction, and preliminary testing of a Neutral Point Clamped Power Inverter. The inverter is designed for the 100 kilowatt class of inverters and has a three phase output connection and a neutral connection. The inverter is designed around insulated gate bipolar …
-
The effect of pressure upon the action of the electrolytic rectifier
Made available in DSpace on 2017-11-30T22:11:15Z (GMT). No. of bitstreams: 2 5968861.pdf: 2332173 bytes, checksum: 3aa9b3f9275a37400d718d9b78ae43e0 (MD5) license.txt: 4813 bytes, checksum: 715c4321821a960fa1a1e91d2ac7ebce (MD5) Previous issue date: 1909
-
A modular multilevel converter with self voltage balancing
Modular multilevel converter (MMC) was proposed in 2003 to extend power electronic converters to high voltage applications. Each MMC contains several identical submodules in series. MMC allows redundant submodules since its operation would not be disturbed by redundant submodules. This is a unique …
-
Computer simulations for constant-frequency resonant power processors
… switching instance of the input inverter. The current and voltage ratings of different circuit components as a function of the control parameter-a angle are shown. The control-to-output characteristics are verified. The advantages of acontrol scheme is demonstrated. Simulation results of the …
-
Modeling and analysis of source-commutated five-phase diode rectifier systems
"The research described herin documents the efforts to design and characterize the behavior of 5-phase diode rectifier systems. The motivation behind this research began with a project whose goal was to establish the source (and subsequently mitigate) the acoustic noise produced by an automotive …
-
Design of Voltage Boosting Rectifiers for Wireless Power Transfer Systems
This thesis presents a multi-stage rectifier for wireless power transfer in biomedical implant systems. The rectifier is built using Schottky diodes. The design has been simulated in 0.5µm and 130nm CMOS processes. The challenges for a rectifier in a wireless power transfer systems are observed to …
-
Evaluation of dynamic and static electrical characteristics for the DY8 and YI8 process gallium diodes in comparison to the DI8 process boron diodes.
A rectifier is an electrical device, comprising one or more semiconductor devices arranged for converting alternating current to direct current by blocking the negative or positive portion of the waveform. The purpose of this study would be to evaluate dynamic and static electrical characteristics …
-
Development of a three-phase cryogenic synchronous rectifier
This thesis details the design, fabrication and testing of prototypes of a three-phase Synchronous Rectifier, Power MOSFETs have been used as rectifying devices for synchronous rectification in combination with the necessary control circuits, Experiments have been performed in four different …
-
The study of single phase diode rectifiers with high power factor and low total harmonic distortion
The mains current in an ac/dc converter contains periodic current pulses due to the action of rectifier and output filter capacitor. The high current peaks cause harmonic distortion of the supply current and low power factor. This results in a poor power quality, voltage distortion, poor power …
-
Monolithic induction-sourced AC-to-DC power supply design
<p>This thesis describes techniques with design nomographs for supplying power to CMOS and microelectromechanical implanted devices. These applications require voltages in the range of 5 to 50 volts. Different kinds of voltage multiplier circuits were used to achieve high voltage output. The …
-
Topology and Control Investigation for Low-voltage High-current Isolated DC-DC Converters
… are the two main challenges for low-voltage high-current DC-DC converters, which are the motivations of the dissertation work. To reduce the switching power loss, soft switching is a desirable technique to keep power loss under control at high switching frequencies. A Duty-Cycle-Shift (DCS) …