Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 120 for “"Electrical engineering Materials"”.

  1. Size and synergy effects on electrical properties of composites with nanocarbon inclusions /

    … area of current research and development. The electrical properties of these composites increase interest of scientific community due to potential applications giving a rise to a novel class of electrical engineering materials. Polymer composites filled with conductive carbon fillers could be …

    vilnius Repository record for Size and synergy effects on electrical properties of composites with nanocarbon inclusions / (opens in a new tab)

  2. Energy Harvesting Using Flextensional Piezoelectric Energy Harvesters in Resonance and Off-Resonance Modes

    … of energy harvesters are integrated in many engineering applications such as automotive, aerospace and ocean engineering. In order to develop a fully functioning stand-alone system, it is essential to integrate it with a built in power source such as a battery or a power generator. Also, in …

    odu Repository record for Energy Harvesting Using Flextensional Piezoelectric Energy Harvesters in Resonance and Off-Resonance Modes (opens in a new tab)

  3. Performance analysis of high power photoconductive switch at elevated temperature

    This project deals with the analysis of high power radio frequency effects on a non-linear opposed contact GaAs photoconductive semiconductor switch, used in high power microwave generation. Specifically, effects of heating on the contacts and the bulk were studied. The changes in the I-V …

    missouri Repository record for Performance analysis of high power photoconductive switch at elevated temperature (opens in a new tab)

  4. Patterning and cross-linking of functionalized polynorbornene polymers

    … have a substantial impact on the mechanical and electrical properties of the polymer. The rate and ultimate conversion of the epoxy ring opening reaction increased with increasing cure temperature, resulting in a higher degree of cross-linking at cure temperatures above 140°C. Degradation …

    gatech Repository record for Patterning and cross-linking of functionalized polynorbornene polymers (opens in a new tab)

  5. Engineering the Electrode Properties for Developing High Performance Supercapacitors

    … density and cycle life. Among the electrode materials, we have focused on improving the energy storage performance of 2D materials like graphene oxide (GO) and tungsten disulfide (WS2), in addition to metal oxides such as manganese oxide and molybdenum oxide. A simple electrophoretic …

    ucf Repository record for Engineering the Electrode Properties for Developing High Performance Supercapacitors (opens in a new tab)

  6. CARBON-BASED MICROELECTRODE DEVELOPMENT FOR ENVIRONMENTAL MONITORING SYSTEM

    Thesis (Ph.D.)--Michigan State University. Electrical and Computer Engineering - Doctor of Philosophy, 2025

    msu Repository record for CARBON-BASED MICROELECTRODE DEVELOPMENT FOR ENVIRONMENTAL MONITORING SYSTEM (opens in a new tab)

  7. Surface decomposition studies of trimethylgallium on silicon(100)

    The trimethylgallium/silicon system is fundamentally and industrially important in microelectronics processing. In this study, the decomposition of trimethylgallium (TMG) on silicon (100) was investigated using thermal desorption spectroscopy (TDS), x-ray photoelectron spectroscopy (XPS), infrared …

    uiuc Repository record for Surface decomposition studies of trimethylgallium on silicon(100) (opens in a new tab)

  8. Chemical evolution, heteroepitaxy, and monolayer patterning of solution-derived lithium niobate thin layers

    Integrated lithium niobate (LiNbO$\sb3$) thin films are of technical interest for frequency doubling and a variety of efficient photonic circuit element applications. Solution deposition of such films on near lattice-matched substrates has been conducted, allowing low temperature processing, …

    uiuc Repository record for Chemical evolution, heteroepitaxy, and monolayer patterning of solution-derived lithium niobate thin layers (opens in a new tab)

  9. Fabrication of quantum wire heterostructures and short wavelength photonic devices using the strain-induced lateral-layer ordering process

    Research is currently underway on a variety of approaches to improve semiconductor laser performance. The use of quantum size effects has been studied for over 25 years. It has been predicted and shown that the incorporation of one-dimensionally confined quantum wells into laser devices can …

    uiuc Repository record for Fabrication of quantum wire heterostructures and short wavelength photonic devices using the strain-induced lateral-layer ordering process (opens in a new tab)

  10. Single crystal and polycrystalline copper indium selenide deposited by the hybrid sputtering and evaporation method for photovoltaic devices

    The results presented here impact the CuInSe$\sb2$ solar cells community in three areas: (1) fundamental understanding of CuInSe$\sb2$ growth and properties, (2) development and optimization of a potentially scalable deposition technique, and (3) improvement in solar cell performance based on a …

    uiuc Repository record for Single crystal and polycrystalline copper indium selenide deposited by the hybrid sputtering and evaporation method for photovoltaic devices (opens in a new tab)

  11. High Performance Indium-Gallium-Arsenide / Indium-Aluminum-Arsenide Transistors Grown on Indium-Phosphide by Molecular Beam Epitaxy

    Described in this thesis are the growth by molecular beam epitaxy (MBE) and characteristics of InGaAs/InAlAs transistors. Superior properties of the InGaAs/InAlAs system have attracted a great deal of interest in electronic and optical device applications for this material system, and spurred …

    uiuc Repository record for High Performance Indium-Gallium-Arsenide / Indium-Aluminum-Arsenide Transistors Grown on Indium-Phosphide by Molecular Beam Epitaxy (opens in a new tab)

  12. Metalorganic chemical vapor deposition, ion beam mixing, and selective epitaxy of III-V semiconductors

    … used to grow III-V compound semiconductor materials. A review of many seminal studies investigating the growth mechanisms of GaAs epitaxial growth is presented. Carbon is an intrinsic impurity in GaAs and AlGaAs grown by MOCVD and a number of growth variables can be modified to minimize …

    uiuc Repository record for Metalorganic chemical vapor deposition, ion beam mixing, and selective epitaxy of III-V semiconductors (opens in a new tab)

  13. Selective oxidation of aluminum bearing III-V semiconductors with applications to quantum well heterostructure lasers

    In the present work, a water vapor oxidation process is used to convert high Al-composition $\rm Al\sb{x}Ga\sb{1-x}As\ and\ In\sb{0.5}(Al\sb{x}Ga\sb{1-x})\sb{0.5}P$ to stable, device-quality native oxides. The insulating and low-refractive-index properties of the native oxide prove useful in the …

    uiuc Repository record for Selective oxidation of aluminum bearing III-V semiconductors with applications to quantum well heterostructure lasers (opens in a new tab)

Page 1 of 6