Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 63 for “"Electrical interconnects"”.

  1. Discrete Multitone Modulation for VSR and MR Electrical Interconnects and Optical Links

    … speed busses to metropolitan scale data center interconnects. A thorough analysis of the selection of key design details is performed both through analytical derivations and measurements in both an electrical and an optical channel that have not been previously done. This work also work merges …

    carleton Repository record for Discrete Multitone Modulation for VSR and MR Electrical Interconnects and Optical Links (opens in a new tab)

  2. Ultra High-Speed Signaling and Return on Technology Investment (ROTI) for the Electrical Interconnects Sector

    Demand for smaller platform sizes with increasing bandwidth has driven crosstalk problems that prevent bus performance to scale with Moore’s Law. Several approaches to reduce crosstalk such as the use of shields, differential links, and equalizers have been rejected due to higher cost and power …

    south-carolina Repository record for Ultra High-Speed Signaling and Return on Technology Investment (ROTI) for the Electrical Interconnects Sector (opens in a new tab)

  3. Study on Nonlinearity and Applications in Integrated Silicon Photonics Devices

    … growth of data tra c in telecommunication, electrical interconnects based on copper traces and wires are nearly achieving the limitation of data transmission bandwidth requirements, and optical interconnects become extremely enticing due to the highly broad transmission bandwidth. Silicon …

    jhu Repository record for Study on Nonlinearity and Applications in Integrated Silicon Photonics Devices (opens in a new tab)

  4. Low-power giga-bit per second optoelectronic integrated circuits for two-dimensional smart-pixel arrays

    Optical interconnects provide wide bandwidth, low loss, and high fanout as compared to traditional electrical interconnects. In the past years many high performance optoelectronic circuits have been demonstrated. However, most of them require complicated process and exotic devices. In order to make …

    uiuc Repository record for Low-power giga-bit per second optoelectronic integrated circuits for two-dimensional smart-pixel arrays (opens in a new tab)

  5. Iron-Based Microstructures For Biodegradable And Non-Biodegradable Applications

    … are being considered. Since iron (Fe) has good electrical and magnetic properties, it undergoes degradation in moist or oxygenated environments, and since it is prevalent in both biological and environmental systems, it is being seriously considered as a candidate material to satisfy these new …

    penn Repository record for Iron-Based Microstructures For Biodegradable And Non-Biodegradable Applications (opens in a new tab)

  6. Carbon nanotube forests: synthesis, patterning, milling, mechanics, and applications

    … of thermal interfaces, mechanical interfaces, electrical interconnects, molecular sensors, battery cathodes, energy storage devices, and low reflectance coatings. This thesis seeks to introduce the reader to nanotechnology and nano-carbon materials, and explain several processes for creating, …

    missouri Repository record for Carbon nanotube forests: synthesis, patterning, milling, mechanics, and applications (opens in a new tab)

  7. Highly integrated polymer photonic switching and interconnects

    … speed and complexity of VLSI technology, electrical interconnects will fail to provide sufficient bandwidth beyond 10GHz after 2012. There does exist an opportunity for the continuing exploration of optics to complement or even replace the conventional board level electrical interconnects. …

    texas Repository record for Highly integrated polymer photonic switching and interconnects (opens in a new tab)

  8. Effect of Palladium Thickness and Extended Isothermal Aging on the Reliability of Solder Interconnects Formed on ENEPIG Surface Finish

    … play an important role in the reliability of electrical interconnects. Electroless Nickel/Electroless Palladium/Immersion Gold (ENEPIG), developed in the mid-1990s to alleviate the "black-pad" problem created by Electroless Nickel/Immersion Gold (ENIG) surface finish, has gained interest for …

    maryland Repository record for Effect of Palladium Thickness and Extended Isothermal Aging on the Reliability of Solder Interconnects Formed on ENEPIG Surface Finish (opens in a new tab)

  9. Physical Design of Optoelectronic System-on-a-Chip/Package Using Electrical and Optical Interconnects: CAD Tools and Algorithms

    Current electrical systems are faced with the limitation in performance by the electrical interconnect technology determining overall processing speed. In addition, the electrical interconnects containing many long distance interconnects require high power to drive. One of the best ways to overcome …

    gatech Repository record for Physical Design of Optoelectronic System-on-a-Chip/Package Using Electrical and Optical Interconnects: CAD Tools and Algorithms (opens in a new tab)

  10. Development of high-speed P-i-N photodetector for 50Gb/s optical link in data centers

    … results from its superiority over traditional electrical interconnects to transmit data at high speed over long distance. The P-i-N photodiode, having the advantage of high bandwidth and low noise level, plays a significant role in the receiver end of optical interconnects. The subject of this …

    uiuc Repository record for Development of high-speed P-i-N photodetector for 50Gb/s optical link in data centers (opens in a new tab)

  11. Augmented Surface Integral Equation Method for Low-Frequency Electromagnetic Analysis

    … low-frequency regime, especially the modeling of electrical interconnects on chip and package levels. The augmentation technique is a simple and efficient remedy for the low-frequency breakdown, which is the bottleneck of the broadband simulation. Based on the augmented formulations, very …

    uiuc Repository record for Augmented Surface Integral Equation Method for Low-Frequency Electromagnetic Analysis (opens in a new tab)

  12. Quality and Reliability of Elastomer Sockets

    … (IC) sockets provide hundreds to thousands of electrical interconnects in enterprise servers, where quality and reliability are critical for customer applications. The evaluation of IC sockets, according to current industry practices, relies on the execution of stress loads and stress levels …

    maryland Repository record for Quality and Reliability of Elastomer Sockets (opens in a new tab)

  13. Design and analysis of a low cost capacitive liquid level sensor

    … intricate sensor and connector assemblies. All electrical interconnects are made using the selective plating, greatly simplifying the design and assembly process. The proposed low cost capacitive sensor uses far less parts, offers much improved useful product life and greater reliability at …

    ut-knoxville Repository record for Design and analysis of a low cost capacitive liquid level sensor (opens in a new tab)

  14. SILK FIBROIN ELECTRONICS: MATERIAL TECHNOLOGY FOR SOFT AND CONFORMAL ELECTRICAL SENSOR IMPLANTS

    … a wide range of soft and conformal implantable electrical sensors on sustainable silk substrates, the first of its kind, that provide a conformal lamination on the curvilinear tissue geometries. First, we report the material technology for realizing silk electrode sensors to the neural tissues …

    nus Repository record for SILK FIBROIN ELECTRONICS: MATERIAL TECHNOLOGY FOR SOFT AND CONFORMAL ELECTRICAL SENSOR IMPLANTS (opens in a new tab) Download file for SILK FIBROIN ELECTRONICS: MATERIAL TECHNOLOGY FOR SOFT AND CONFORMAL ELECTRICAL SENSOR IMPLANTS (opens in a new tab)

  15. SYNTHESIS AND CHARACTERIZATION OF ONE-DIMENSIONAL COPPER STRUCTURES

    … applications in sensors, batteries, thermal and electrical management, and more. The performance and reliability of these devices depend on the robust bonding between the metal structures and the underlying substrates. Quantitative evaluation of the mechanical properties and bonding strength …

    temple Repository record for SYNTHESIS AND CHARACTERIZATION OF ONE-DIMENSIONAL COPPER STRUCTURES (opens in a new tab)

  16. Sub-Micron Self-Aligned Chiplet-Based Optical Fiber-to-Chip Interconnects for 2.5D Heterogeneous Integration

    … scale toward higher integration and bandwidth, electrical interconnects increasingly limit system efficiency, signal integrity, and packaging scalability. Optical interconnects offer superior bandwidth and power characteristics, yet their adoption is hindered by challenges in optical coupling, …

    gatech Repository record for Sub-Micron Self-Aligned Chiplet-Based Optical Fiber-to-Chip Interconnects for 2.5D Heterogeneous Integration (opens in a new tab)

  17. Electrically Induced Photonic Transitions In Silicon Waveguides And Resonators

    … in the telecommunication industry because electrical interconnects have clearly reached its limits, and the demand of high performance active silicon photonics devices such as modulators and isolators become greater. In this thesis, I will show both in theory and experiment, by inducing …

    cornell Repository record for Electrically Induced Photonic Transitions In Silicon Waveguides And Resonators (opens in a new tab)

  18. Controlling And Detecting Light For On-Chip Optical Interconnects

    … that is approaching the limits of traditional electrical interconnects. Optical links, traditionally limited to only long-hual communications, are therefore replacing electrical cables at increasingly small distances, down to only a few tens of centimeters already. In the near future, optical …

    cornell Repository record for Controlling And Detecting Light For On-Chip Optical Interconnects (opens in a new tab)

  19. Design of Reconfigurable Interfaces for Energy Efficient Nanophotonic Interconnects

    … As chip designs become more complex, traditional electrical interconnects face limitations due to increasing power dissipation, signal integrity issues, and bandwidth constraints. Short-reach nanophotonic interconnects offer a promising alternative to overcome these challenges. Photonic Networks …

    concordia Download PDF for Design of Reconfigurable Interfaces for Energy Efficient Nanophotonic Interconnects (opens in a new tab)

  20. Carbon nanotube based hybrid nanostructures: Synthesis and applications

    … applications in future nanoelectronics, electrical interconnects and energy storage devices. Practical ways of connecting individual carbon nanotubes to metal contacts for their use as interconnects and in electronic devices have been challenging. In this thesis, carbon nanotube based …

    rice Repository record for Carbon nanotube based hybrid nanostructures: Synthesis and applications (opens in a new tab)

Page 1 of 4