Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 67 for “"Electrical isolation"”.
-
Thermomigrated Junction Isolation of Deep Reactive Ion Etched, Single Crystal Silicon Devices, and its Application to Inertial Navigation Systems
… deep reactive ion etching by developing an electrical isolation technology to enable electro-mechanical function in these new deep reactive ion etched structures. The objective of the research is twofold. The first is to develop and characterize an electrical isolation technology for DRIE, …
-
Microfabrication and Analysis of Manifold Microchannel Coolers for Power Electronics
… were fabricated and tested both with and without electrical isolation between the chip and the coolant. Experimentally, the coolers without electrical isolation demonstrated thermal resistivity values as low as 0.06 K/(W/cm2), which is up to a 50X improvement over a standard power package with …
-
Design and fabrication of a compact specimen for evaluation of corrosion resistance of new post-tensioning systems
… (with and without couplers), bearing plates and electrical isolation. Possible combinations of the following materials were identified using a specimen matrix: Strands: Conventional, Copper Clad, Stainless Clad, Stainless, Epoxy Coated, Hot Dip Galvanized, Electroplated Galvanized; Ducts: One-Way …
-
Power Electronic Architectures for Solar-Charged Electric Vehicles
… in solar-charged EVs that do not require electrical isolation between the solar array and the high voltage battery. The generalized method can be used to design for the voltage gain required of any application with a minimum number of components. To illustrate the method, a novel high …
-
Electrochemical behaviour of platinum-iridium anodes
… that oxidation of the substrate leading to electrical isolation of coating plates is responsible for the area decay.
-
The effects of non-uniform illumination on the performance of series connected photovoltaic arrays
… of generating electricity in regions where electrical isolation is required. Using Series Connected Photovoltaic Arrays (SCPA) for voltage conversion has the advantage in that high voltage can be directly generated in a small volume. These advantages have led to applications in which the …
-
Development of Colloid Displacement Lithography Platforms for Sensor Applications
… However, for actual sensor applications, electrical isolation of individual sensor sections must be achieved. This is attempted by laying down a 40 μm stripe of PDDA on a cleaned substrate and coating that stripe with gold colloid. The size of 40 μm or less in width is set as the target to …
-
Sputtered AlN as Hard Mask for GaN Etching and Selective Area Regrowth and as High-k Gate Dielectric for MOS Devices
… with wide energy bandgap of 6.2 eV confers its electrical isolation properties for high breakdown field; combined with its high dielectric constant up to 8.5, AlN can be used as a high-k dielectric material for MOS device applications. In this work, metal-insulator-semiconductor (MIS) capacitors …
-
Mitigation of transient radiation effects in advanced silicon-germanium technologies
… improved radiation response due to the enhanced electrical isolation provided by pnp SiGe HBTs. In addition, this work will assess the efficacy of mixed-mode simulation techniques with respect to the radiation-induced transient response of SiGe-based RF circuits as well as investigate the impact …
-
Electrochromism of Transition Metal Phthalocyanine Thin Films
… charge-consuming ability, apparently related to electrical isolation of small domains, perhaps grains. The oxidations and rereductions are electrochromic, and the various color changes are described.
-
Active-clamp PWM converters: design-oriented analysis and small-signal characterization
… circuit in high-frequency PWM converters with an electrical isolation. Existing design guidelines and design trade-offs for the ACL in forward and flyback converters are reviewed, and specific properties of both circuits that are caused by the ACL are highlighted. Based on the obtained results, a …
-
Extrinsic Fabry-Perot Interferometric hydrogen gas sensor
… are impractical for many applications requiring electrical isolation or operation in the presence of strong electromagnetic fields. Materials can be sputter deposited along cylindrical optical fiber-based sensors to create novel fiber-optic chemical sensors. Herein, the mechanisms allowing the …
-
Output Circuits for Cutaneous Muscle Stimulators
… 25 mA or less over a range of resistive loads. Electrical isolation safety and isolation design improvements for the Constant Current Transformer Amplified stimulator are presented.
-
Isolation technique using GMR resistor
Electrical isolation devices are generally required in all circuits which employ multiple or distantly placed grounds and in virtually all medical devices that electrically contact the human body (for patient protection). With any of the present isolation techniques, opto-isolation, capacitive or …
-
High-frequency transformer isolated fixed-frequency DC-DC resonant power converters for alternative energy applications
… load. They are also used in applications where electrical isolation is required. Power generation from renewable energy sources suffers from highly fluctuating output voltages. Electrical isolation of renewable energy sources from the grid is essential. Therefore, DC-DC converters are used as an …
-
Left Atrial Posterior Wall Isolation in the Treatment of Atrial Fibrillation
… is undefined. Left atrial posterior wall isolation (LAPWI) is a promising lesion set, based on techniques for surgical AF ablation. The left atrial posterior wall can be isolated via catheter, surgical or hybrid ablation techniques. This MD thesis aims to inform a comparative trial of …
-
Infrared Phased-array Antenna-coupled Tunnel Diodes
… response can be tailored by the thickness of the electrical isolation stand-off layer on which the detector is fabricated and/or the inclusion of a ground plane. Directional detection of IR radiation is achieved with a pair of dipole antennas coupled to a MOM diode through a coplanar strip …
-
Simulation study of monolithic 8-12 micron GaAs/AlGaAs multiple quantum well infrared image sensor
… simulation shows that in order to provide electrical isolation between the GaAs MESFET and the MQW photoconductor, for n-channel doping concentration of 2*10<sup>17</sup> cm<sup>-3</sup>, the p-type layer separating them should not be less than 0.7 um for a dopant concentration of …
-
The Integration of Gallium-Based Liquid Metal Energy Circuits into Additively Manufactured Shape Memory Alloy Actuators for Increased Actuation Frequencies
… same channels to inductively heat the SMA, if electrically isolated and configured into induction-favorable geometries. Computational models suggest that such actuators can demonstrate an increased actuation frequency of 400%, compared to traditional cycling of large SMAs. In this work, a …
-
Solid State Autotransformer (SSAT) - based Multi-pulse Rectifier Concepts for AC to DC Conversion in Space Constrained Applications
… are used in several systems when isolation is not required, they themselves can be large enough in high power applications. Converting the input voltage into medium frequency (MF) or high frequency (HF) and using smaller size MF/HF transformers can significantly increase the power …
Page 1 of 4