Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 66 for “"Electrical testing"”.

  1. Electrical Testing of Piezoelectric Transducers Applied to Accelerometer Design

    … to characterize these transducers involve both electrical and mechanical measurements. The purpose of this paper is to propose a technique to characterize piezoids which will require electrical measurements only. Thus, characterization can be accomplished through the use of readily available …

    ucf Repository record for Electrical Testing of Piezoelectric Transducers Applied to Accelerometer Design (opens in a new tab)

  2. Simulation and fabrication of an interposer for electrical testing of fine-pitch wafer-level packages

    This thesis describes the design, fabrication and electrical simulation of a new MEMS-based interposer which serves as the electro-mechanical interface between the device chip under test and the test processor. The interposer has vertical through wafer interconnection and capable of probing area …

    nus Repository record for Simulation and fabrication of an interposer for electrical testing of fine-pitch wafer-level packages (opens in a new tab) Download file for Simulation and fabrication of an interposer for electrical testing of fine-pitch wafer-level packages (opens in a new tab)

  3. Nano-Ionic Redox Resistive RAM – Device Performance Enhancement Through Materials Engineering, Characterization and Electrical Testing

    … with obliquely deposited films. The devices were electrically characterized by conducting current vs. voltage (IV) measurements, Read/Write voltage, the two resistive states, switching rate, and the reliability. The devices show greater than four orders of magnitude difference in the two resistive …

    boise Repository record for Nano-Ionic Redox Resistive RAM – Device Performance Enhancement Through Materials Engineering, Characterization and Electrical Testing (opens in a new tab)

  4. Mechanistic Insights into Chloride Transport in Geopolymer Concrete: Redefining Electrical Testing Protocols and Establishing Performance Criteria

    … of GPC is commonly assessed using rapid electrical tests originally developed for OPC. However, the fundamental assumptions underlying these tests have not been validated for geopolymer systems. In addition, electrical test outcomes, particularly from the Rapid Chloride Permeability Test, …

    unsw Repository record for Mechanistic Insights into Chloride Transport in Geopolymer Concrete: Redefining Electrical Testing Protocols and Establishing Performance Criteria (opens in a new tab) Embargoed

  5. Directed assembly of functional patterns

    … at developing multichannel, high sensitivity, electrical testing apparatus for the study of micro-scale, network-like, assemblies of various organic and hybrid materials. A multiple microelectrode array (MMEA) specifically designed for in-plane conductivity studies was used as the physical …

    soton Download PDF for Directed assembly of functional patterns (opens in a new tab)

  6. Characterisation of a 4680 Cylindrical Cell: Insights Into Cell Design and Performance

    … aims to provide insights into the design and electrical testing of a 4680 cylindrical Li-ion cell with a lithium iron phosphate (LFP) cathode. This cell chemistry has recently gained more interest within the automotive sector due to its cost and safety. Insights into the cell design have been …

    chalmers Repository record for Characterisation of a 4680 Cylindrical Cell: Insights Into Cell Design and Performance (opens in a new tab)

  7. IN SITU STEM STUDY OF METAL OXIDES NANOWIRES FOR NANOELECTRONICS AND ENERGY STORAGE SYSTEMS

    … nitrogen-cooling holder was used for thermal testing and scanning tunneling microscopy (STM) stage holder was used to perform electrical testing on individual nanowires.

    mtu Repository record for IN SITU STEM STUDY OF METAL OXIDES NANOWIRES FOR NANOELECTRONICS AND ENERGY STORAGE SYSTEMS (opens in a new tab)

  8. Development of an Advanced Semiconductor Laboratory

    … circuit layout, semiconductor fabrication, and electrical testing. The following steps were taken in order to accomplish this task: choosing and customizing a computer aided design (CAD) software package for device layout, pMOS process integration on the toolset in the cleanroom facilities at …

    vt Repository record for Development of an Advanced Semiconductor Laboratory (opens in a new tab)

  9. Electromechanical evolution of Carbon nanotube-coated microfibers

    … with extremely light weight. CNTs have high electrical conductivity, high thermal conductivity and high strength. These properties make CNTs ideal, not only for a wide range of applications but also as a test bed for fundamental science. Since a conventional glass fiber is electrically …

    missouri Repository record for Electromechanical evolution of Carbon nanotube-coated microfibers (opens in a new tab)

  10. Preliminary design, simulation, and test of the electrical power subsystem of the TINYSCOPE nanosatellite

    … focuses on the design, simulation, and hardware testing of a nanosatellite electrical power subsystem. Thesis efforts centered on investigating the feasibility of using commercial off the shelf power management and distribution systems in a CubeSat-based design for a tactically useful …

    nps Repository record for Preliminary design, simulation, and test of the electrical power subsystem of the TINYSCOPE nanosatellite (opens in a new tab)

  11. Development of a Monolithically Integrated GaN Nanowire Memory Device

    … substrate through a top-down approach. Initial electrical testing showed a functional, blue-shifted LED and the existence of a 2.5V memory window for a +/-10V program/erase window. Finally, a new self-limiting etch technique was examined to address possibilities for further scaling nanowires.

    rit Repository record for Development of a Monolithically Integrated GaN Nanowire Memory Device (opens in a new tab)

  12. YIELD ENGINEERING AND IMPROVEMENT ON SEMICONDUCTOR DEVICES

    … overall non-yielding percentage. Subsequently, electrical testing correlation had been conducted to identify one of the root causes which are Inter Metal Oxide Thickness. Data from testers has indicated another probable cause which is Metal Shorting. Deeper analyses into the two root causes were …

    nus Repository record for YIELD ENGINEERING AND IMPROVEMENT ON SEMICONDUCTOR DEVICES (opens in a new tab) Download file for YIELD ENGINEERING AND IMPROVEMENT ON SEMICONDUCTOR DEVICES (opens in a new tab)

  13. Mechanical and electrical characterization of novel carbon nano fiber ultralow density foam

    Concomitant mechanical and electrical testing of carbon nanofiber foam samples, generated using the constrained formation of fibrous nanostructures process reveal the material to be a unique ultra-low-density foam with electrical properties appropriate for application as strain gauge. Samples of …

    nps Repository record for Mechanical and electrical characterization of novel carbon nano fiber ultralow density foam (opens in a new tab)

  14. Improved Bandwidth Carbon Fiber Reinforced Plastic Structural Antenna Design for near-HF Remote Sensing Applications

    … original tube design. This trade study considers electrical performance (specifically bandwidth), implications to aircraft range, and assessment of the structural design. From the initial trade study, two aerodynamic shapes are considered for further assessment—an ellipse with a t/c ratio of 0.33 …

    ku Repository record for Improved Bandwidth Carbon Fiber Reinforced Plastic Structural Antenna Design for near-HF Remote Sensing Applications (opens in a new tab)

  15. Evaluating thermal imaging for identification and characterization of solar cell defects

    … is then used to locate the shunts. Then electrical testing is performed to measure the characteristics of the solar cell. The shunts are then isolated. Then performance is tested once more to compare with previous data. Microscopy was used to explore the nature of shunts.</p>

    iastate Repository record for Evaluating thermal imaging for identification and characterization of solar cell defects (opens in a new tab)

  16. Low Pressure and Short-Time Silver-Sintering for Power Modules

    … about 75% compared with the traditional method. Electrical testing and mechanical performance evaluation further verified the superiority of the Paste+Film process in ensuring chip structural integrity, improving process yield and material utilization, and provided a new path for achieving …

    vt Repository record for Low Pressure and Short-Time Silver-Sintering for Power Modules (opens in a new tab)

  17. Sensitivity Enhancement of Metal-Oxide Chemical Sensors for Detection of Volatile Organic Compounds

    … (VOC) through changes in both device and testing characteristics. Two methods of testing prototype sensors were developed which consisted of short and long-term exposure to ethanol at different temperatures and concentrations. Maximum sensitivity at 2000 ppm was achieved in devices with …

    rit Repository record for Sensitivity Enhancement of Metal-Oxide Chemical Sensors for Detection of Volatile Organic Compounds (opens in a new tab)

  18. Identifying the Effects of the Agricultural Mechanics Academy Electricity Workshop

    … knowledge to teach, and their ability to perform electrical skills after attending a targeted, hands-on electricity workshop. Results indicated significant improvements in self-perceived competence across multiple electrical skill areas, including safety and tools, switches and receptacles, …

    texas-state Repository record for Identifying the Effects of the Agricultural Mechanics Academy Electricity Workshop (opens in a new tab)

Page 1 of 4