Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 593 for “"Electro-mechanical systems"”.

  1. Computer application - electro mechanical systems

    … Today’s commercially available rapid prototyping systems work with different techniques using paper, waxes, photocurable resins, polymers and new metal powders. This project is concerned with one type of rapid prototyping technology, namely fused deposition modelling, which was initially …

    dcu Download PDF for Computer application - electro mechanical systems (opens in a new tab)

  2. Coupled Dynamics Of Thin Micro Electro Mechanical Systems

    Microelectromechanical systems (MEMS) combine high levels sensitivity and multifunctionality with small size and low power consumption. The major prime mover for MEMS industry in the past has been automobiles whereas consumer electronics (E.g. iPhones and Nintendo Wii) is the most important sector …

    cornell Repository record for Coupled Dynamics Of Thin Micro Electro Mechanical Systems (opens in a new tab)

  3. Micro electro mechanical systems microphone-design and process development

    This thesis is a quest to design and fabricate a MEMS microphone. The investigations done as part of the thesis not only include the design of the microphone, but the manufacturability challenges and test issues as well. The motive behind covering the breath of issues in this thesis has been driven …

    ttu Repository record for Micro electro mechanical systems microphone-design and process development (opens in a new tab)

  4. Micro-Electro-Mechanical Systems (MEMS) Integrated Frequency Reconfigurable Antenna

    … (PIFA), by the use of radio frequency micro-electro-mechanical system (RF MEMS) switches. This research work has been conducted at the Micro/Nano Electro Mechanical Systems (µN _eMS) Laboratory at Utah State University. In this thesis, two electrically small frequency reconfigurable antenna …

    utahstate Repository record for Micro-Electro-Mechanical Systems (MEMS) Integrated Frequency Reconfigurable Antenna (opens in a new tab)

  5. Wireless Applications of Radio Frequency Micro-Electro-Mechanical Systems

    … frequency spectrum. As a result, reconfigurable systems are of significant importance and research is being conducted in numerous universities. The purpose of this research is to develop novel RF MEMS based reconfigurable wireless systems. By utilizing the RF MEMS switches as a basic building …

    unsw Repository record for Wireless Applications of Radio Frequency Micro-Electro-Mechanical Systems (opens in a new tab)

  6. Nano-electro-mechanical systems fabricated by tip-based nanofabrication

    … we demonstrated various types of silicon NEMS mechanical resonators such as single-clamped, double-clamped, wavy-shaped, spider-like and spiral-shaped using this TBN method with a heated AFM tip. Laser interferometer measurement on two NEMS resonators showed resonance frequencies of 1.2MHz and …

    uiuc Repository record for Nano-electro-mechanical systems fabricated by tip-based nanofabrication (opens in a new tab)

  7. Remote experimentation testing and characterization of micro electro mechanical systems

    … testing and characterization lab for Microelectromechanical Systems. The system is split into three different modes of operation depending on purpose: 1. Remote Full Device Access Lab, 2. Remote Experiments Lab, and 3. MEMS Characterization Lab. In the first two modes of operation, a MEMS …

    ttu Repository record for Remote experimentation testing and characterization of micro electro mechanical systems (opens in a new tab)

  8. Lubrication and Tribological Performance Optimizations for Micro-Electro-Mechanical Systems

    Two approaches to solving MEMS tribology problems have been pursued. In the first approach, a direct lubrication method using well-known lubricants such as perfluoropolyether (PFPE) and multiply alkylated cyclopentane (MAC) was developed. Extensive tribological tests using reciprocating sliding and …

    nus Repository record for Lubrication and Tribological Performance Optimizations for Micro-Electro-Mechanical Systems (opens in a new tab) Download file for Lubrication and Tribological Performance Optimizations for Micro-Electro-Mechanical Systems (opens in a new tab)

  9. Investigation and development of ferrofluid enabled micro-electro-mechanical systems

    Ferrofluids are magnetic fluids that can be manipulated using magnetic field. Ferrofluids have unique properties that have led to various interesting applications. Although, currently they are being used in few commercial products in macro-scale domain, there has been limited success in their …

    ubc Repository record for Investigation and development of ferrofluid enabled micro-electro-mechanical systems (opens in a new tab) Download PDF for Investigation and development of ferrofluid enabled micro-electro-mechanical systems (opens in a new tab)

  10. An integrated environment for electro-mechanical systems design and analysis

    … tools for concurrent engineering of complex systems. A prime objective of the work was to develop an integrated CAE system for concurrent engineering and to investigate performance issues, including: Design management, productivity, modelling and simulation. The main aspects that are …

    glasgow Repository record for An integrated environment for electro-mechanical systems design and analysis (opens in a new tab) Download PDF for An integrated environment for electro-mechanical systems design and analysis (opens in a new tab)

  11. Microactuators and their application in micro-opto-electro-mechanical systems (MOEMS)

    Microactuators are active elements for microelectromechanical systems (MEMS), and are used to provide force to move the MEMS device in the way required. Therefore, their force characteristics, displacement capabilities and velocity ranges are of importance, and require to be investigated. Scratch …

    strathclyde Repository record for Microactuators and their application in micro-opto-electro-mechanical systems (MOEMS) (opens in a new tab)

  12. DELAY DIFFERENTIAL EQUATIONS AND THEIR APPLICATION TO MICRO ELECTRO MECHANICAL SYSTEMS

    … role in modeling performance on demand Micro Electro Mechanical Systems (MEMS). We start with the stability analysis of a linear delay model. We also show that in certain cases the delay model can be efficiently approximated with a much simpler model without delay. We proceed with the analysis …

    vcu Repository record for DELAY DIFFERENTIAL EQUATIONS AND THEIR APPLICATION TO MICRO ELECTRO MECHANICAL SYSTEMS (opens in a new tab)

  13. Micro Electro Mechanical Systems Integrated Frequency Reconfigurable Antennas for Public Safety Applications

    … pattern) using Radio Frequency (RF) Micro Electro Mechanical Systems (MEMS). This is a part of the overall research performed at the RF Micro/Nano Electro Mechanical Systems (μN∈MS) Laboratory at Utah State University, which includes design, microfabrication, test, and characterization of …

    utahstate Repository record for Micro Electro Mechanical Systems Integrated Frequency Reconfigurable Antennas for Public Safety Applications (opens in a new tab)

  14. Optical Micro-Electro-Mechanical Systems for Add/Drop Multiplexing and Infrared Spectroscopy

    … ranging efforts in development of various Micro-Electro-Mechanical (MEM) devices over the past twenty years have created a vast collection of novel devices that can be fabricated in numerous ways. As the MEMS field matures it is important to remember the systems aspect the name implies and ensure …

    cornell Repository record for Optical Micro-Electro-Mechanical Systems for Add/Drop Multiplexing and Infrared Spectroscopy (opens in a new tab)

  15. Implementation of a Low Cost Micro Electro Mechanical Systems Inertial Navigation Solution

    The purpose of this study is to develop a low cost navigation solution for General Aviation (GA) aircraft and flight testing aircraft. This low cost solution uses a Global Positioning System (GPS) coupled with an Inertial Navigation Solution (INS) to provide a more accurate, stable navigation …

    embry-riddle Repository record for Implementation of a Low Cost Micro Electro Mechanical Systems Inertial Navigation Solution (opens in a new tab)

  16. Nanoscale Mapping of In-Situ Micro Electro Mechanical Systems with Atomic Force Microscopy

    Micro-electro-mechanical-systems (MEMS) are increasingly at our fingertips. To understand and thereby improve their performance, especially given their ever-decreasing sizes, it is crucial to measure their functionality in-situ. Atomic Force Microscopy (AFM) is well suited for such studies, …

    uconn-diss Repository record for Nanoscale Mapping of In-Situ Micro Electro Mechanical Systems with Atomic Force Microscopy (opens in a new tab)

  17. Use of Instabilities in Electrostatic Micro-Electro-Mechanical Systems for Actuation and Sensing

    … to exploit static and dynamic instabilities in electrostatic MEMS to develop new MEMS devices, namely dynamically actuated micro switches and binary micro gas sensors. Models are developed for the devices under consideration where the structures are treated as elastic continua. The electrostatic …

    waterloo Repository record for Use of Instabilities in Electrostatic Micro-Electro-Mechanical Systems for Actuation and Sensing (opens in a new tab)

  18. Mode I and Mode II Measurements For Stiction Failed Micro-Electro-Mechanical Systems

    Among MicroElectroMechanical Systems (MEMS), the most common type of failure is stiction. Stiction is the unintended adhesion between two surfaces when they are in close proximity to each other. Various studies have been conducted in recent years to study stiction. Our research group has shown the …

    unm Repository record for Mode I and Mode II Measurements For Stiction Failed Micro-Electro-Mechanical Systems (opens in a new tab)

  19. Tribology of self-lubricating SU-8 composites for micro-electro mechanical systems (MEMS) applications

    … process. However, its poor tribological and mechanical properties are major concerns, if SU-8 has to replace Si, which is the mainstay structural material for making MEMS. Low modulii and hardness present problems in the fabrication and functioning of the micro-machines. Poor tribology will …

    nus Repository record for Tribology of self-lubricating SU-8 composites for micro-electro mechanical systems (MEMS) applications (opens in a new tab) Download file for Tribology of self-lubricating SU-8 composites for micro-electro mechanical systems (MEMS) applications (opens in a new tab)

Page 1 of 30