Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 151 for “"Electrochemical Testing"”.

  1. A Rubric for Electrochemical Testing of Metallic Biomaterials

    … for the failure of metallic medical implants. Testing a metal’s suseptability to corrosion prior to implantation is key to a successful implantation. Electrochemical processes were used in this study to evaluate the characteristics of corrosion of both AISI 316 stainless steel and titanium …

    calpoly Repository record for A Rubric for Electrochemical Testing of Metallic Biomaterials (opens in a new tab)

  2. Investigation of reagent storage and electrochemical testing on filter paper

    … well as its influence on quantitative, long-term testing. Second, the need for specialized instrumentation to perform the analytical methods on the paper devices can be a logistical and financial burden to end users in resource-limited settings. This dissertation addressed these questions through …

    bu Repository record for Investigation of reagent storage and electrochemical testing on filter paper (opens in a new tab)

  3. Preparation and Electrochemical Testing of Flexible Carbon Nanofiber Electrodes from Electrospinning

    … of other potential applications including, electrochemical storage and conversion devices, chemical sensing, and filtration. The focus of this work was electrochemical storage and conversion devices in the form of lithium ion battery anodes and cathodes as well as ionic polymer composite …

    vt Repository record for Preparation and Electrochemical Testing of Flexible Carbon Nanofiber Electrodes from Electrospinning (opens in a new tab)

  4. Modification of a High-Temperature Electrochemical Testing Station and Experimental Development for Solid Oxide Electrolysis Cell Anode Analysis

    … distribution. A solid oxide fuel cell (SOFC) testing system was enhanced to complete steam electrolysis testing of the cells with prepared anodes. To prepare anodes of desirable morphology and uniform thickness the effect of spraying parameters on anode morphology were studied. Sonication of …

    queens Repository record for Modification of a High-Temperature Electrochemical Testing Station and Experimental Development for Solid Oxide Electrolysis Cell Anode Analysis (opens in a new tab)

  5. Electrochemical Testing of Diglyme-Based Structural Battery Electrolytes Produced by Polymerization-Induced Phase Separation for Low-Temperature Applications

    Structural batteries have generated significant interest in recent years due to the increasing electrification of the transportation sector. Structural electrolytes are typically composed of a composite material with both efficient ion transport and excellent mechanical strength with light weight. …

    tamu Repository record for Electrochemical Testing of Diglyme-Based Structural Battery Electrolytes Produced by Polymerization-Induced Phase Separation for Low-Temperature Applications (opens in a new tab)

  6. Evaluation of the seabed temperature corrosion and sulphide stress cracking (SSC) resistance of weldable martensitic 13% chromium stainless steel (WMSS)

    … lined pipe. Sulphide Stress Cracking (SSC) and electrochemical testing has been undertaken on parent weldable martensitic 13% chromium stainless steel (WMSS) pipe in grade LC80-130S (API 5CT) supplied by Nippon Steel & Sumitomo Metal Corporation (NSSMC). SSC tests have been conducted at the …

    birmingham Download PDF for Evaluation of the seabed temperature corrosion and sulphide stress cracking (SSC) resistance of weldable martensitic 13% chromium stainless steel (WMSS) (opens in a new tab)

  7. Optimization of Electrolytes for Low Temperature Zinc-ion Battery

    … structure. Here, we develop a self-driving electrochemical testing platform integrated with Bayesian optimization to autonomously explore and optimize low-temperature zinc electrolyte formulations. The platform enables automated formulation, real-time conductivity analysis with high …

    jhu Repository record for Optimization of Electrolytes for Low Temperature Zinc-ion Battery (opens in a new tab) Embargoed until 2029-05-01

  8. Solid Oxide Fuel Cell Cathodes: Experiments on Material Stability and Novel Test System Development

    … fabrication of reproducible electrodes and rapid electrochemical testing thereof. The study of reaction between LBC and CO2 was carried using a combination of thermogravimetric analysis (TGA), ex-situ X-Ray Diffraction (XRD) of products from TGA experiments and in-situ high-temperature XRD of …

    queens Repository record for Solid Oxide Fuel Cell Cathodes: Experiments on Material Stability and Novel Test System Development (opens in a new tab)

  9. Model electrodes for understanding solid oxide fuel cell reactions

    … performances. Inaccuracy in measuring the electrochemically active area – the triple phase boundary – has been suggested in the literature to account for unexpected results. This inaccuracy has been proposed to be caused by defects introduced during electrode fabrication, which are not …

    whiterose Download file for Model electrodes for understanding solid oxide fuel cell reactions (opens in a new tab)

  10. Carbonate-Assisted Electrochemical Oxidation of Methane on Bimetallic Copper/Cerium Oxides

    … synthesized with a simple sol-gel method for the electrochemical oxidation of methane. Synthesis parameters such as calcination temperature and composition were optimized for maximum electrochemical performance. These materials were studied with a variety of characterization techniques in order to …

    guelph Repository record for Carbonate-Assisted Electrochemical Oxidation of Methane on Bimetallic Copper/Cerium Oxides (opens in a new tab)

  11. Novel Electrical Interfaces for Bionic Limbs

    … biocompatibility, hemocompatibility, and electrochemical stability. The research herein explores silicon carbide’s semiconductor properties, with a highlighted focus on a unique and innovative design structure - centered around a p-n junction. This work examines detailed fabrication steps …

    usf Repository record for Novel Electrical Interfaces for Bionic Limbs (opens in a new tab)

  12. Electrodeposition-Derived MnO₂ as a Cathode Material for Aqueous Zinc-Ion Batteries

    … the synthesis, structural characterization, and electrochemical performance of electrodeposited MnO₂ polymorphs as cathode materials for AZIBs. Phase-controlled MnO₂ films were successfully fabricated via electrodeposition by tuning precursor chemistry and deposition conditions. Cathodic …

    gatech Repository record for Electrodeposition-Derived MnO₂ as a Cathode Material for Aqueous Zinc-Ion Batteries (opens in a new tab)

  13. Producing transition metal oxides as cathodes for aqueous zinc-ion batteries via Ultra-Short Laser Pulses for In-situ Nanostructure Generation (ULPING)

    … poses challenges due to the need to balance electrochemical efficiency with environmental and health considerations. This thesis introduces a cutting-edge laser processing method to fabricate battery electrodes using a fiber-pulsed laser. This approach is efficient and environmentally …

    uoit Repository record for Producing transition metal oxides as cathodes for aqueous zinc-ion batteries via Ultra-Short Laser Pulses for In-situ Nanostructure Generation (ULPING) (opens in a new tab)

  14. Assessing coupled mechanical behavior and environmental degradation at submicron scales

    … through the combination of nanomechanical testing, high resolution microscopy, diffraction, and electrochemical testing. Nanomechanical techniques were used to isolate environmental, orientation, and size effects. Material evaluation focuses on metals, both model and engineering alloys, in …

    purdue-thes Repository record for Assessing coupled mechanical behavior and environmental degradation at submicron scales (opens in a new tab)

  15. Corrosion Assessment for Additive Manufactured Alloys Based On Interfacial Active/ Passive Mechanisms

    Passivity as an electrochemical/chemical mechanism has an important impact on engineering materials; the process helps to mitigate and control the corrosion process by providing a nano- to Angstrom- scale protective barrier layer on a metallic surface. The protectiveness offered by this natural …

    tamu Repository record for Corrosion Assessment for Additive Manufactured Alloys Based On Interfacial Active/ Passive Mechanisms (opens in a new tab)

  16. ADVANCED DOPANTS FOR POLYPYRROLE SYNTHESIS AND MAGNETIC POLYPYRROLE COMPOSITE ELECTRODES FOR SUPERCAPACITORS

    … composites. These methods improved the overall electrochemical performance and cyclic stability of PPy electrodes. The pseudocapacitive properties of ferrimagnetic and ferromagnetic materials were explored and combined with PPy to fabricate composites with enhanced charge storage properties and …

    mcmaster Repository record for ADVANCED DOPANTS FOR POLYPYRROLE SYNTHESIS AND MAGNETIC POLYPYRROLE COMPOSITE ELECTRODES FOR SUPERCAPACITORS (opens in a new tab)

  17. Recovery and Ag-Si Interfacial Upcycling of Silicon-Rich Fractions from End-of-Life Photovoltaic Modules for Potential Lithium-Ion Battery Anode Applications

    … treatment to form Ag–Si interfacial structures. Electrochemical testing showed that silver-modified recycled silicon (Ag–rSi) improved initial Coulombic efficiency from 39.51% to 46.67% and remained active through 15 cycles, whereas the unmodified r-Si electrode became unstable by Cycle 9. …

    unsw Repository record for Recovery and Ag-Si Interfacial Upcycling of Silicon-Rich Fractions from End-of-Life Photovoltaic Modules for Potential Lithium-Ion Battery Anode Applications (opens in a new tab) Embargoed

  18. The Adaption of a Rapid Screening Test to Rank the Corrosion Behaviour of Stainless Steel Reinforcing Bars in Concrete

    … for any signs of corrosion. The results of the electrochemical testing and the observations made during and after autopsying the bars were found to differ. The detection of corrosion initiation in the electrochemical testing was then changed to reflect the results of the autopsied bars. If any …

    waterloo Repository record for The Adaption of a Rapid Screening Test to Rank the Corrosion Behaviour of Stainless Steel Reinforcing Bars in Concrete (opens in a new tab)

  19. Surface Modification of Nickel Phosphide During Oxygen Evolution Reaction and Routes to a Dual-Site Mechanism

    … via electroless deposition and characterized via electrochemical testing. Their surface composition after alkaline oxygen evolution reaction (OER) testing was evaluated via x-ray photoelectron spectroscopy (XPS); it was determined that nickel phosphide catalyst precursors oxidize to nickel …

    houston Repository record for Surface Modification of Nickel Phosphide During Oxygen Evolution Reaction and Routes to a Dual-Site Mechanism (opens in a new tab)

  20. Friction stir processing for the reversal and mitigation of sensitisation and intergranular corrosion in aluminium alloy 5083-H321

    … rate than the once-sensitised material under electrochemical testing. This indicates that corrosion resistance degrades more quickly with subsequent sensitisation.

    birmingham Download PDF for Friction stir processing for the reversal and mitigation of sensitisation and intergranular corrosion in aluminium alloy 5083-H321 (opens in a new tab)

Page 1 of 8