Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 40 for “"Electroless copper"”.
-
Emissions of formalderhyde from electroless copper plating operations
Master of Science (M.S.)
-
Enhanced Adhesion Between Electroless Copper and Advanced Substrates
In this work, adhesion between electrolessly deposited copper and dielectric materials for use in microelectronic devices is investigated. The microelectronics industry requires continuous advances due to ever-evolving technology and the corresponding need for higher density substrates with smaller …
-
Development of a novel method in electroless copper plating
The modern day electroless copper plating solution commonly consists of copper ions, chelating agents, buffers, stabilizers, accelerators and surfactants. The roles of chelating agents, stabilizers and surfactants in the plating solution were investigated with emphasis on the plating rate and …
-
Consumption and loss of formaldehyde in electroless copper plating
… and distribution of formaldehyde losses from the electroless copper plating process. Plating and rinse bath samples obtained from three electroless copper plating operations were analyzed for formaldehyde and copper in order to develop a mass balance analysis about the plating bath for periods of …
-
X-ray diffraction analyses of electrolytic and electroless copper films for circuit boards
<p>Electrolytic and electroless deposited copper films from different baths and with different polymeric substrates (ABS, polyimide, and FR-4) were analyzed by x-ray diffraction (XRD). The sin<sup>2</sup>φ method was employed for determining macrostresses in those films. Separate contributions to …
-
Passivation effects of surface iodine layer on tantalum for the electroless copper deposition.
… a surface iodine layer on air-exposed Ta for the copper electroless deposition was investigated by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Although the passivation effect was seriously weakened by the prolonged air exposure, iodine passivates the Ta substrate …
-
Investigation of peculiarities of electroless copper plating systems using hydroxycarboxylic acids as Cu(II) ligands /
Electroless metal coating technique is one of the elegant ways of metal coating by controlling the temperature and pH of the plating bath in which there is no usage of electric current. The industrial electroless copper plating solution containing formaldehyde as reducing agent are known from the …
-
Fabrication and optimization of 3D metallic parts using electroplating of additively manufactured parts
… In this thesis, an overview of the basics of electroless copper plating, copper electroplating, AM technologies and their applications are covered. An introduction to how an AM part is produced, how electroless copper plating is carried out on a non-conductive surface, how an electroless …
-
Cheminio variavimo sistemų, Cu(II) ligandais naudojant hidroksikarboksirūgštis, ypatumų tyrimas /
Electroless metal coating technique is one of the elegant ways of metal coating by controlling the temperature and pH of the plating bath in which there is no usage of electric current. The industrial electroless copper plating solution containing formaldehyde as reducing agent are known from the …
-
Autokatalizinių Cu(II) redukcijos procesų tyrimas cheminio variavimo sistemose ligandais naudojant gamtinius polihidroksilius junginius /
… and sucrose – as an alternative ligand for electroless copper plating systems with reducer formaldehyde. Natural polyols are environmentally friendly, easily bio-degradable materials, but has not been studied enough for suitability for copper plating systems. In order to increase of the …
-
Investigation of the autocatalytic Cu(II) reduction processes in the systems with natural polyhydroxylic compounds as ligands /
… and sucrose – as an alternative ligand for electroless copper plating systems with reducer formaldehyde. Natural polyols are environmentally friendly, easily bio-degradable materials, but has not been studied enough for suitability for copper plating systems. In order to increase of the …
-
Chemical reactions at the interfaces of semiconductors and catalysts with solutions: I. Tin-palladium catalysts in electroless copper plating. II. Dissolution of crystalline gallium-arsenide in solutions containing complexing agents.
… of tin and palladium in catalysts used in electroless copper plating have been determined by Rutherford backscattering spectrometry with high energy (2-5) MeV ⁴He⁺. The tin:palladium ratio in the catalyst decreases when exposed to an alkaline solution. X-ray photoelectron spectroscopy has …
-
Laser-assisted formation of electro-conductive circuit traces on dielectric materials by electroless metal plating technique /
In this thesis, laser-assisted selective chemical copper deposition on dielectrics, and its application for formation of electric circuit traces was investigated. Two approaches of selective plating methods were proposed and tested: laser direct structuring (LDS) of polypropylene with carbon …
-
Lazeriu inicijuotas elektrinio laidumo takelių formavimas ant dielektrikų besroviu cheminiu metalo nusodinimo metodu /
In this thesis, laser-assisted selective chemical copper deposition on dielectrics, and its application for formation of electric circuit traces was investigated. Two approaches of selective plating methods were proposed and tested: laser direct structuring (LDS) of polypropylene with carbon …
-
Improvements for chip-chip interconnects and MEMS packaging through MEMS materials and processing research
… three topics were investigated in this work: electroless copper deposition on printed wiring boards (PWBs), polymer-based air-gap microelectromechanical systems (MEMS) packaging technology, and thermal stability enhancement in sacrificial polymers, such as poly(propylene carbonate) (PPC). In …
-
Exposure and risk assessment of the printed wiring board industry : making holes conductive process
… MHC alternative technologies reviewed here are: Electroless Copper, Non-Formaldehyde Electroless Copper, Palladium (Tin and Organic Stabilized), Graphite, Carbon, and Conductive Polymer. The risk comparison is achieved by estimating chemical exposure to workers and the general public and then …
-
Oro, argono ir azoto dujų įtaka PC/ABS paviršiui jį modifikuojant pikosekundžių ir femtosekundžių šviesos impulsais selektyviam vario nusodinimui besroviu būdu /
… by Picosecond Laser Pulses for Selective Electroless Deposition of Copper This research investigates the effects of air (2 atm), nitrogen (1 atm, 1.5 atm) and argon (1 atm) gas agitation to the surface of PC/ABS during laser modification process. The polymer modification process is a part …
-
Interfacial adhesion in metal/polymer systems for electronics
… surface modification methods on the adhesion of electroless and sputter-deposited metals to dielectric polymers were investigated. The adhesion of Cu and Cr/Cu metallizations to the epoxies, liquid crystalline polymer and inorganic-organic hybrid polymer was measured with the newly developed pull …
Page 1 of 2