Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Electromagnetic Generator"”.

  1. Energy Harvesting IC Design for an Electromagnetic Generator Based on the Split Capacitor Approach

    … intends to harvest vibrational energy via an electromagnetic generator (EMG). The proposed circuit intends to extract maximum power from the EMG by utilizing the maximum power transfer theorem which states that maximum power is transferred to the load when the source resistance equals the load …

    vt Repository record for Energy Harvesting IC Design for an Electromagnetic Generator Based on the Split Capacitor Approach (opens in a new tab)

  2. Linear Electromagnetic Energy Scavenging Device Designed in Low Temperature Co-Fired Ceramics

    … solar or batteries are not available. A linear electromagnetic generator is designed and prototyped for use in a frame backpack configuration. A base excitation vibration model is developed to predict the available energy from the movement of a person walking while wearing a backpack. The energy …

    boise Repository record for Linear Electromagnetic Energy Scavenging Device Designed in Low Temperature Co-Fired Ceramics (opens in a new tab)

  3. MICRO-CIRCUIT DIODE FOR ULTRA-LOW-POWER ENERGY HARVESTING

    … of two alternating sources, the oscillatory electromagnetic generator and the piezoelectric energy harvester, to conduct experiments in a more realistic context. The micro-circuit diode shows excellent advantages in electromagnetic generator experiment, the micro-circuit based half-wave …

    siu-theses Repository record for MICRO-CIRCUIT DIODE FOR ULTRA-LOW-POWER ENERGY HARVESTING (opens in a new tab)

  4. A Novel Micro Fluid Kinetic Energy Harvester Based on the Vortex-Induced Vibration Principle and the Piezo Effect

    … bench. To further improve the performance, an electromagnetic generator is proposed, and therefore, a multimethod demonstrator realized. The demonstrators are working in air flow already at a velocity of 2 m/s, and reach the maximum efficiency at 3.6 m/s. This performance ranks among the best …

    qucosa-diss

  5. Detection of respiratory information using electromagnetic biosensors

    … electrical engineering include the design of an electromagnetic respiratory effort harvester, the first human study data of respiratory rate and tidal volume detection using electromagnetic biosensors, and an investigation of simultaneous harvesting and sensing feasibility with a low-power …

    hawaii Repository record for Detection of respiratory information using electromagnetic biosensors (opens in a new tab)

  6. Design of an electromagnetic vibration energy harvester for structural health monitoring of bridges employing wireless sensor networks

    … energy through the use of a translational electromagnetic generator, to power a wireless sensor network for bridge structural health monitoring. An analysis of bridge vibrations, the use of nonlinear and linear harvester compliance, resonant frequency tuning, and bandwidth widening to …

    texas Repository record for Design of an electromagnetic vibration energy harvester for structural health monitoring of bridges employing wireless sensor networks (opens in a new tab)

  7. On the modelling and optimisation of a novel wave-energy device

    … physical components, such as a capacitor in the electromagnetic generator. The depth-averaged two-dimensional \acl{BL} model is critically assessed. While offering improved dispersive accuracy over the classical \acl{SW} approximation, the \acl{BL} formulation is shown to be incompatible with the …

    whiterose Download PDF for On the modelling and optimisation of a novel wave-energy device (opens in a new tab)

  8. Methods of frequency tuning vibration based micro-generator

    A vibration based micro-generator is an energy harvesting device that couples a certain transduction mechanism to the ambient vibration and converts mechanical energy to electrical energy. In order to maximize available power, micro-generators are typically inertial devices that operate at a single …

    soton Download PDF for Methods of frequency tuning vibration based micro-generator (opens in a new tab)

  9. Multi-purpose Electromagnetic Energy Harvesting System

    This thesis proposes a multi-purpose electromagnetic energy harvesting system that harnesses mechanical energy from diverse types of mechanical motion sources and converts it into low power electrical energy. The harvested electrical energy is either used to supply power to low-power electronic …

    waterloo Repository record for Multi-purpose Electromagnetic Energy Harvesting System (opens in a new tab)

  10. System and process design of the locally enhanced electric field treatment (LEEFT) for water disinfection

    … disinfection are developed. A water turbine electromagnetic generator directly is used to extract mechanical energy from the flowing water and convert the mechanical energy to electric energy to power LEEFT disinfection. By adopting this system, the LEEFT disinfection does not relies on the …

    gatech Repository record for System and process design of the locally enhanced electric field treatment (LEEFT) for water disinfection (opens in a new tab)

  11. Modelling and performance evaluation of an electromagnetic regenerative shock absorber with mechanical motion rectifier

    … is mainly concerned with the modelling of an electromagnetic regenerative shock absorber with mechanical motion rectifier (MMR), and its performance evaluation when it is implemented in the suspension of a road vehicle. Unlike a conventional regenerative shock absorber, the inclusion of a …

    soton Download PDF for Modelling and performance evaluation of an electromagnetic regenerative shock absorber with mechanical motion rectifier (opens in a new tab)

  12. Mechanical Energy Harvesting for Powering Distributed Sensors and Recharging Storage Systems

    … to electrical conversion efficiencies utilizing electromagnetic, piezoelectric, and magnetostrictive mechanisms. Models based upon the constitutive equations for these three conversion mechanisms, supported by extensive experimental results available in literature, suggest that power requirement …

    vt Repository record for Mechanical Energy Harvesting for Powering Distributed Sensors and Recharging Storage Systems (opens in a new tab)

  13. Energy harvesting from body motion using rotational micro-generation

    … from walking has been previously extracted using generators placed on shoes, backpacks, and knee braces while producing power levels ranging from milliwatts to watts. The research presented in this paper examines the available power from walking and running at several body locations. The ankle, …

    mtu Repository record for Energy harvesting from body motion using rotational micro-generation (opens in a new tab)

  14. Towards Intelligent Tire and Self-Powered Sensing Systems

    … tire. In order to design these sensors,~both electromagnetic generator (EMG) and triboelectric nanogenerators (TENG) are used. In the first two initial designed sensors, with the combination of EMG and TENG into a single package, two hybridized sensors are fabricated with promising potential …

    waterloo Repository record for Towards Intelligent Tire and Self-Powered Sensing Systems (opens in a new tab)

  15. Model, Design, and Control for Power Conversion in Wave Energy Converter System

    … motions from the buoy to rotational motions, an electromagnetic generator that produces electricity from a rotational shaft, and a power electronics converter that converts the ac electric power from the generator and charges the output dc battery or the ac grid. The models of the WEC system are …

    vt Repository record for Model, Design, and Control for Power Conversion in Wave Energy Converter System (opens in a new tab)

  16. Výroba elektrické energie z vibrací jízdního kola

    Práce je zaměřena na metody získávání elektrické energie z okolního prostředí. V projektu je shrnuto a obecně popsáno několik metod přeměn energií. Podrobnější popis je věnován metodě na principu Faradayova jevu. Práce zahrnuje výpočet elektromagnetického generátoru s konkrétními parametry, …

    brno-tech Repository record for Výroba elektrické energie z vibrací jízdního kola (opens in a new tab)

  17. Elektromagnetický rezonátor jako zdroj elektrické energie na železniční trati

    Cieľom diplomovej práce bolo navrhnúť elektromagnetický generátor pre účely napájanie signalizačného a bezpečnostného zariadenia na železničných tratiach. Práve elektromagnetický generátorom predstavuje autonómny elektrický zdroj, ktorý v prípade tratí nepokrytých elektroinštaláciou je potrebný …

    brno-tech Repository record for Elektromagnetický rezonátor jako zdroj elektrické energie na železniční trati (opens in a new tab)

  18. Studie získávaní elektrické energie v leteckých aplikacích

    Motivací práce bylo objasnění možných řešení snížení počtu bezpečnostních kontrol obecného vzdušného dopravního prostředku s udržením požadované bezpečnosti letového provozu. Mezi vhodným přístupy k řešení daného problému se jeví využití energy harvesting zařízení pro napájení bezdrátového …

    brno-tech Repository record for Studie získávaní elektrické energie v leteckých aplikacích (opens in a new tab)

  19. Energy Harvesting Opportunities Throughout the Nuclear Power Cycle for Self-Powered Wireless Sensor Nodes

    Dedicated sensors are widely used throughout many industries to monitor everyday operations, maintain safety, and report performance characteristics. In order to adopt a more sustainable solution, much research is being applied to self-powered sensing, implementing solutions which harvest wasted …

    vt Repository record for Energy Harvesting Opportunities Throughout the Nuclear Power Cycle for Self-Powered Wireless Sensor Nodes (opens in a new tab)

  20. Testování vibračního generátoru s příčnou cívkou

    Tato práce se zabývá oživením a otestováním parametrů vibračního elektromagnetického generátoru, navržením konstrukčních úprav a vytvořením numerického modelu popisujícího chování generátoru v prostředí MATLAB Simulink.

    brno-tech Repository record for Testování vibračního generátoru s příčnou cívkou (opens in a new tab)

Page 1 of 2