Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 60 for “"Electromagnetic model"”.

  1. Electromagnetic model subdivision and iterative solvers for surface and volume double higher order numerical methods and applications

    … been established in the numerical analysis of electromagnetic structures decreasing the number of unknowns compared to the low order discretization. In order to decrease memory requirements even further, model subdivision in the computational analysis of electrically large structures has been …

    colostate Repository record for Electromagnetic model subdivision and iterative solvers for surface and volume double higher order numerical methods and applications (opens in a new tab)

  2. A Coupled Heat Transfer and Electromagnetic Model for Simulating Microwave Heating of Thin Dielectric Materials in a Resonant Cavity

    … work is to combine existing heat transfer and electromagnetic models to provide a complete simulation for heating dielectric materials in a resonant microwave cavity. The numerical simulation is validated by comparison to several independent sets of experimental data. The ultimate goal is to …

    vt Repository record for A Coupled Heat Transfer and Electromagnetic Model for Simulating Microwave Heating of Thin Dielectric Materials in a Resonant Cavity (opens in a new tab)

  3. A coupled electromagnetic and heat transfer finite-element model for simulating microwave processing of composite materials in a cylindrical resonant cavity

    A coupled electromagnetic/heat transfer model capable of simulating microwave processing of composite materials in a cylindrical resonant cavity was developed. The two-dimensional model simulates processing of axisymmetric material loads in cylindrical resonant cavities operating in the TM₀₁₀ mode. …

    vt Repository record for A coupled electromagnetic and heat transfer finite-element model for simulating microwave processing of composite materials in a cylindrical resonant cavity (opens in a new tab)

  4. Melt Detection and Estimation in Greenland Using Tandem QuikSCAT and SeaWinds Scatterometers

    … Melt detection is performed using a layered electromagnetic model combined with a Markov chain model. The new melt detection method allows classification of the snow-pack into three states: melt, refreeze, and frozen. Melt severity and refreeze severity indexes are also developed. The melt …

    byu Repository record for Melt Detection and Estimation in Greenland Using Tandem QuikSCAT and SeaWinds Scatterometers (opens in a new tab) Download PDF for Melt Detection and Estimation in Greenland Using Tandem QuikSCAT and SeaWinds Scatterometers (opens in a new tab)

  5. A CAD model for the axial inductive strip with finite thickness centered in homogeneous finline with wb=1

    This thesis describes a CAD compatible circuit model for an inductive strip with finite metal thickness centered in finline with wb=1. Scattering coefficients predicted by the circuit model are in good agreement with those predicted by an electromagnetic model based on Maxwell's equations. Filter …

    nps Repository record for A CAD model for the axial inductive strip with finite thickness centered in homogeneous finline with wb=1 (opens in a new tab)

  6. Thermal design and optimization of high torque density electric machines

    … optimization using an integrated thermal-electromagnetic design tool that accounts for advanced cooling technology. A parametric thermal model of electric machines was constructed and implemented using a finite difference approach incorporating an automated, self segmenting mesh …

    gatech Repository record for Thermal design and optimization of high torque density electric machines (opens in a new tab)

  7. An Analysis of the Natural Frequencies of Oscillation of Helical Coils and Windings

    The study of electromagnetic natural oscillations of helical coils and windings is of fundamental importance in the design of electrical equipment. This thesis is directed towards an extension of the basic mathematical analysis of this phenomenon. An electromagnetic model of helical windings is …

    marquette Repository record for An Analysis of the Natural Frequencies of Oscillation of Helical Coils and Windings (opens in a new tab)

  8. Efficient Broadband Electromagnetic Modeling of the Power Distribution Network in High -Speed, Mixed -Signal Integrated Circuits

    A locally three-dimensional model is used to model correctly the field behavior at irregular discontinuities such as splits, holes, vias, and pins in the power-ground plane structure. The resulting discrete, locally three-dimensional electromagnetic model, is used in conjunction with a passive …

    uiuc Repository record for Efficient Broadband Electromagnetic Modeling of the Power Distribution Network in High -Speed, Mixed -Signal Integrated Circuits (opens in a new tab)

  9. 18/12 Switched Reluctance Motor Design For A Mild-Hybrid Electric Powertrain Application

    … geometry is brought into JMAG to develop an electromagnetic model and begin the geometry optimization. The 18/12 design process highlights how changes to motor parameters from a geometry and winding standpoint will affect motor performance. After the motor core geometry yields suitable …

    mcmaster Repository record for 18/12 Switched Reluctance Motor Design For A Mild-Hybrid Electric Powertrain Application (opens in a new tab)

  10. QUENCH PROTECTION AND DESIGN OF HIGH-FIELD SUPERCONDUCTING ACCELERATOR MAGNETS: THE ROLE OF DYNAMIC EFFECTS ON THE DIFFERENTIAL INDUCTANCE

    … protection study, it is therefore important to model the inductance in the correct way. This work shows how the inductance in superconducting magnets is connected to transient effects typical of the superconductivity. An electromagnetic model is presented, and compared with experimental data. …

    milano Repository record for QUENCH PROTECTION AND DESIGN OF HIGH-FIELD SUPERCONDUCTING ACCELERATOR MAGNETS: THE ROLE OF DYNAMIC EFFECTS ON THE DIFFERENTIAL INDUCTANCE (opens in a new tab)

  11. Radar simulation of human activities in non line-of-sight environments

    … in nonline-of-sight environments. The simulation model incorporates dynamic human motion, electromagnetic scattering mechanisms, channel propagation effects and radar sensor parameters. Detailed, feature-by-feature analyses of the resulting radar signatures are carried out to enhance our …

    texas Repository record for Radar simulation of human activities in non line-of-sight environments (opens in a new tab)

  12. DC superconducting busbar for all electric aircraft propulsion system

    … the superconducting busbar was created based on electromagnetic modelling and underwent testing in a laboratory environment. A 2D electromagnetic busbar model with multiple high-temperature superconducting tapes was developed using TA-formulation. The electromagnetic model helps to understand the …

    strathclyde Repository record for DC superconducting busbar for all electric aircraft propulsion system (opens in a new tab)

  13. Response-calibration Techniques For Antenna-coupled Infrared Sensors

    … is significant interaction, both thermal and electromagnetic, between the antenna, the antenna-coupled sensor, and the low-frequency readout structures necessary for signal extraction at the baseband modulation frequency. Validation of design models against measurements requires separation of …

    ucf Repository record for Response-calibration Techniques For Antenna-coupled Infrared Sensors (opens in a new tab)

  14. An Improved Microwave Radiative Transfer Model For Ocean Emissivity At Hurricane Force Surface Wind Speed

    An electromagnetic model for predicting the microwave blackbody emission from the ocean surface under the forcing of strong surface winds in hurricanes is being developed. This ocean emissivity model will be incorporated into a larger radiative transfer model used to infer ocean surface wind speed …

    ucf Repository record for An Improved Microwave Radiative Transfer Model For Ocean Emissivity At Hurricane Force Surface Wind Speed (opens in a new tab)

  15. Phonon Modulation By Polarized Lasers For Material Modification

    … on a metallic implant during MRI procedure, an electromagnetic model and thermal model are studied. The models consider the shape of RF magnetic pulses, interaction of RF pulses with metal plate, thermal conduction inside the metal and the convection at the interface between the metal and the …

    ucf Repository record for Phonon Modulation By Polarized Lasers For Material Modification (opens in a new tab)

  16. Development Of An Improved Microwave Ocean Surface Emissivity Radiative Transfer Model

    An electromagnetic model is developed for predicting the microwave blackbody emission from the ocean surface over a wide range of frequencies, incidence angles, and wind vector (speed and direction) for both horizontal and vertical polarizations. This ocean surface emissivity model is intended to …

    ucf Repository record for Development Of An Improved Microwave Ocean Surface Emissivity Radiative Transfer Model (opens in a new tab)

  17. Modelisation des aquiferes thermaux avec des methodes geophysiques integrees

    … a methodology for cross-validation between the electromagnetic model (EM), densities models, and models of resistivity. The development and application of this methodology were in two hydrothermal environments. To improve the knowledge of the structural context of thermal aquifers, different …

    cagliari Repository record for Modelisation des aquiferes thermaux avec des methodes geophysiques integrees (opens in a new tab)

  18. Integrated Fast Battery Charger Using an Electrically Excited Synchronous Machine-Based Drive System

    … Simplorer/Simulink was conducted, in which the electromagnetic model of the machine interacted dynamically with the converter and control system. This enabled real time calculation of inductances and losses under variations in both shift angle and rotor position. Finally, a Simulink-based system …

    chalmers Repository record for Integrated Fast Battery Charger Using an Electrically Excited Synchronous Machine-Based Drive System (opens in a new tab)

  19. Design and Implementation of a Stepped Frequency Continuous Wave Radar System for Biomedical Applications

    … with contact measurements. Furthermore, an electromagnetic model has been developed using a multi-layer dielectric model of the human subject to validate the experimental results. The agreement between measured and simulated results is good for distances up to 2 m and at various subjects’ …

    ut-knoxville Repository record for Design and Implementation of a Stepped Frequency Continuous Wave Radar System for Biomedical Applications (opens in a new tab)

Page 1 of 3