Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 108 for “"Electromagnets"”.

  1. Shading coils for alternating current electromagnets

    In general, contrary to popular opinion. heavy shading coils are not as effective in reducing noise in an alternating current electromagnet as those which are smaller and thus have a greater value of resistance. This occurs because in addition to obtaining the greatest shift possible between flux …

    vt Repository record for Shading coils for alternating current electromagnets (opens in a new tab)

  2. Dynamic analysis of a nonlinear parametrically excited system using electromagnets

    Parametrically excited systems, where defining system parameters vary periodically with an independent variable (time), are a popular research topic in engineering. Cable-stayed bridges, free hanging marine flexible risers, planetary gear systems and other engineering structures are often subject …

    soton Download PDF for Dynamic analysis of a nonlinear parametrically excited system using electromagnets (opens in a new tab)

  3. Compatibility Evaluation of Glass/Epoxy Insulation for Use in ITER’s Central Solenoid Superconducting Electromagnets

    … material in the central solenoid superconducting electromagnets for the International Thermonuclear Experimental Reactor (ITER). Before these materials can be used, a compatibility of these glass products with an epoxy matrix has to be characterized. In this study, three candidate glass types …

    ut-knoxville Repository record for Compatibility Evaluation of Glass/Epoxy Insulation for Use in ITER’s Central Solenoid Superconducting Electromagnets (opens in a new tab)

  4. Developing a Feedback Control System Using Electromagnets to Increase the Stiffness of a Circular Saw Blade

    … in developing a feedback control system using electromagnets to increase the stiffness of a circular saw blade. A finite element analysis was performed in a model of a saw blade to determine there the electromagnets should be placed relative to the new saw blade. Experimental tests were …

    ut-knoxville Repository record for Developing a Feedback Control System Using Electromagnets to Increase the Stiffness of a Circular Saw Blade (opens in a new tab)

  5. Magnetic retrieval of prosthetic heart valves for redo-TAVI

    … regions on the exchangeable valve and electromagnets in the catheter. The three components were designed and modelled computationally and simulations were performed to assess crimping, deployment, engagement, and removal of an exchangeable valve. The crimping of the exchangeable valve …

    soton Repository record for Magnetic retrieval of prosthetic heart valves for redo-TAVI (opens in a new tab) Download PDF for Magnetic retrieval of prosthetic heart valves for redo-TAVI (opens in a new tab)

  6. Electromagnetic suspension system for prosthetic limbs that compensates for residual limb shrinkage

    … system for lower-limb prosthetics uses electromagnets to control the amount of force exerted on the residual limb. When the electromagnets are turned on, they will attract the material on the liner, thus creating a secure attachment. The design incorporates an Arduino microprocessor and …

    hawaii Repository record for Electromagnetic suspension system for prosthetic limbs that compensates for residual limb shrinkage (opens in a new tab)

  7. Magnetic field assisted milli-scale robotic assembly machine: an approach to massively parallel swarm robotic automation systems

    … machine prototype consists of a 16x16 array of electromagnets. The dimensions of the electromagnets are 5mm high with an inner diameter of 1.1mm and outer diameter of 2.5mm. All the electromagnets are driven by a 16x16 array of H-Bridges, and an Arduino microcontroller is used to control and …

    njit Repository record for Magnetic field assisted milli-scale robotic assembly machine: an approach to massively parallel swarm robotic automation systems (opens in a new tab)

  8. Testing of an Electronic Controlled Prosthetic System to Reduce Volume Limb Loss

    … but lacks fine control. The system proposed uses electromagnets to add regional control while also being used to help with suspension of the limb. The rest of the system consists of pressure sensors, a microcontroller, and additional circuits to amplify the sensor outputs and control the amount of …

    hawaii Repository record for Testing of an Electronic Controlled Prosthetic System to Reduce Volume Limb Loss (opens in a new tab)

  9. The development of a radial active magnetic bearing

    … a rigid shaft. The AMB system constitutes 1) electromagnets, 2) power amplifiers, 3) position sensors and 4) a control system. Inductive sensors measure the air gap between the shaft and the stator in the vertical and horizontal axis. The sensor signal is fed back to a controller that provides …

    nwu-za Repository record for The development of a radial active magnetic bearing (opens in a new tab)

  10. A Neural Network Driven Sensor Array for Locating a Permanent Magnet

    … stylus of a magnetic haptic interface that uses electromagnets to provide haptic feedback to a permanent magnet on the stylus. Hence our method must be able to sense the magnet position in the presence of disruptive materials, such as the iron cores of the actuating electromagnets. As these …

    calgary Repository record for A Neural Network Driven Sensor Array for Locating a Permanent Magnet (opens in a new tab)

  11. Analysis and Design of a Stationary Magnetic Abrasive Finishing System

    … in a magnetic field which is generated by the electromagnets located underneath the workpiece. In this study, a finishing apparatus using a rotating magnetic field, with stationary electromagnets and workpiece, is developed for surface finishing. This system utilizes a rotating magnetic field …

    waterloo Repository record for Analysis and Design of a Stationary Magnetic Abrasive Finishing System (opens in a new tab)

  12. The development of an axial active magnetic bearing

    … dissertation. The physical model constitutes two electromagnets positioned above and beneath a 2 kg steel disc with an air gap of 3 mm on either side of the disc. The electromagnetic design is done analytically and verified using Quickfield finite element analysis software. Inductive sensors are …

    nwu-za Repository record for The development of an axial active magnetic bearing (opens in a new tab)

  13. Effects of continuous magnetic field manipulation on high-resolution eddy-current pattern for artificial perception applications

    … patterns with a relatively small number of electromagnets or electrodes based on the distributed parameter element method. Unlike traditional methods where discrete points are stimulated, the synthesized magnetic or electric fields are accurately controlled between adjacent electromagnets or …

    gatech Repository record for Effects of continuous magnetic field manipulation on high-resolution eddy-current pattern for artificial perception applications (opens in a new tab)

  14. Stimulated emission by relativistic electrons traversing a periodic magnetic field.

    … of operation of the FEL is discussed. The use of electromagnets to generate a static periodic magnetic field of alternating polarity (as a pump wave source) is proposed. Preliminary measurements with respect to the proposed electromagnet design are analyzed.

    nps Repository record for Stimulated emission by relativistic electrons traversing a periodic magnetic field. (opens in a new tab)

  15. DNA Capture via Magnetic Beads in a Microfluidic Platformfor Rapid Detection of Antibiotic Resistance Genes

    … was a well carved out of PMMA placed between two electromagnets. To test the mixing well, beads and capture DNA were placed in it, and the electromagnets were subjected to different frequencies, including symmetric or asymmetric magnetic fields. For each condition the capture efficiency was …

    byu Repository record for DNA Capture via Magnetic Beads in a Microfluidic Platformfor Rapid Detection of Antibiotic Resistance Genes (opens in a new tab) Download PDF for DNA Capture via Magnetic Beads in a Microfluidic Platformfor Rapid Detection of Antibiotic Resistance Genes (opens in a new tab)

  16. Modeling of magnetic field driven simultaneous assembly

    … processing. The technique requires the use of electromagnets as well as soft and hard magnetic materials that are applied to devices and recesses respectively. The MFDSA approach offers the ability to check and correct errors in real-time and is capable of scalable, versatile, and high-yield …

    njit Repository record for Modeling of magnetic field driven simultaneous assembly (opens in a new tab)

Page 1 of 6