Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 183 for “"Electron injection"”.

  1. Electron injection in betatrons and synchrotrons

    … of this thesis was to determine the offset of injection over a period of time which is large compared to the interval over which electrons can be accepted. This has been done for the case of constant-momentum injection; Eq. (b5) shows the dependence of this acceptance period upon the momentum …

    iastate Repository record for Electron injection in betatrons and synchrotrons (opens in a new tab)

  2. Hot electron injection into uniaxially strained silicon

    … silicon attracts great attention due to the long electron spin lifetime. Silicon is also one of the most commonly used semiconductor in microelectronics industry. The spin relaxation process of diamond crystal structure such as silicon is dominant by Elliot-Yafet mechanism. Yafet shows that …

    maryland Repository record for Hot electron injection into uniaxially strained silicon (opens in a new tab)

  3. Electron Injection-induced Effects In Iii-nitrides: Physics And Applications

    This research investigated the effect of electron injection in III-Nitrides. The combination of electron beam induced current and cathodoluminescence measurements was used to understand the impact of electron injection on the minority carrier transport and optical properties. In addition, the …

    ucf Repository record for Electron Injection-induced Effects In Iii-nitrides: Physics And Applications (opens in a new tab)

  4. Study of novel electron injection mechanisms for laser-wakefield accelerators

    … promising route to reducing the size and cost of electron (or positron) accelerators with applications in areas such as fundamental research, (biomedical) imaging or radiotherapy. In this thesis, I discuss novel mechanisms through which electrons are injected into the accelerating structure and …

    oxford Repository record for Study of novel electron injection mechanisms for laser-wakefield accelerators (opens in a new tab)

  5. Characterizing Energetic Electron Precipitation and Whistler-mode Waves during Electron Injection Events

    … energetic particle precipitation is a substorm injection. Energetic electron precipitation associated with substorm injections typically occurs when magnetospheric waves, particularly whistler-mode waves, resonantly interact with electrons to affect their pitch angle and scatter particles into …

    calgary Repository record for Characterizing Energetic Electron Precipitation and Whistler-mode Waves during Electron Injection Events (opens in a new tab)

  6. Disentangling non-thermal electron injection and decay in solar flares using multi-wavelength radio observations

    … the acceleration and transport of energetic electrons.</p><p>In this work, injections and transport of energy and particles into the solar corona during flares are studied. This is accomplished through the development and use of the PIP_Decomp Fitter, an automated fitting tool made by the …

    njit Repository record for Disentangling non-thermal electron injection and decay in solar flares using multi-wavelength radio observations (opens in a new tab)

  7. Impact of Ionizing Radiation and Electron Injection on Carrier Transport Properties in Narrow and Wide Bandgap Semiconductors

    … to determine minority carrier properties include electron beam induced current (EBIC) and cathodoluminescence (CL) spectroscopy. The CL spectroscopy is complemented with time-resolved CL (TRCL) for direct measurement of carrier radiative recombination lifetime. The minority carrier properties and …

    ucf Repository record for Impact of Ionizing Radiation and Electron Injection on Carrier Transport Properties in Narrow and Wide Bandgap Semiconductors (opens in a new tab)

  8. Impact of Electron Injection and Radiation Damage on Minority Carrier Transport Properties in Gallium Oxide and Gallium Nitride

    … with applications in high temperature electronics and sensors for use in extreme environments. Ga2O3 is a suitable material for devices deployed in the lower Earth satellite orbits due to its intrinsic radiation hardness, applications in solar-blind ultraviolet (UV) detection, and high …

    ucf Repository record for Impact of Electron Injection and Radiation Damage on Minority Carrier Transport Properties in Gallium Oxide and Gallium Nitride (opens in a new tab)

  9. Hot electron injection effect and improved linearity in type-I/II DHBT for millimeter-wave mixed signal circuit applications

    … with epitaxial growth on this substrate. The hot electron injection effect is incorporated to improve gain and speed by using the AlInP/GaAsSb/InP material system with a Type-I/II energy band alignment. Chapter 1 of this work gives a brief overview of the motivation to conduct this research and an …

    uiuc Repository record for Hot electron injection effect and improved linearity in type-I/II DHBT for millimeter-wave mixed signal circuit applications (opens in a new tab)

  10. FUNDAMENTAL INSIGHTS INTO THE CHARGE TRANSFER PROCESSES IN DYE-SENSITIZED SOLAR CELLS: HOLE TRANSFER, REGENERATION, CHARGE RECOMBINATION, AND ELECTRON INJECTION

    … enhancing charge recombination between TiO2 electrons and oxidized iodide species in DSSCs. This led to a deleterious lower Voc value for the ruthenium sensitizer with a selenium heteroatom in an iodide/triiodide electrolyte. This implies that the design of sensitizer molecules must take into …

    jhu Repository record for FUNDAMENTAL INSIGHTS INTO THE CHARGE TRANSFER PROCESSES IN DYE-SENSITIZED SOLAR CELLS: HOLE TRANSFER, REGENERATION, CHARGE RECOMBINATION, AND ELECTRON INJECTION (opens in a new tab)

  11. Investigation of MoO3 as an electron injection contact and as a charge transport material in transparent organic light emitting devices

    … show that it is possible to achieve efficient electron injection from the MAM electrode into organic layers by means of incorporating a suitable Electron Injection Layer (EIL) at the interface. Results also show that a MAM electrode can exhibit high optical transmittance, amounting to about …

    waterloo Repository record for Investigation of MoO3 as an electron injection contact and as a charge transport material in transparent organic light emitting devices (opens in a new tab)

  12. Μελέτη φωτονικών ιδιοτήτων οργανικών ευαισθητοποιητών με δυνατότητα εφαρμογής σε φωτοβολταϊκά κελιά

    … dyes with triphenylamine and carboxyl acid as electron donor and acceptorrespectively and fluorene as π-conjugated bridge was performed. Particularly, photophysicalmeasurements of the new sensitizers were carried in four solvents of varied polarity i.e.toluene, tetrahydrofuran, acetone and …

    greece Repository record for Μελέτη φωτονικών ιδιοτήτων οργανικών ευαισθητοποιητών με δυνατότητα εφαρμογής σε φωτοβολταϊκά κελιά (opens in a new tab)

  13. Spectroscopic investigation of photoinduced heterogeneous electron transfer

    The dynamics of heterogeneous electron transfer are investigated by using several spectroscopic techniques. The system under study is the perylene chromophore chemically linked via different bridge-anchor groups onto the surface of nano- structured TiO2 anatase. The energetics of the interface are …

    fu-berlin Repository record for Spectroscopic investigation of photoinduced heterogeneous electron transfer (opens in a new tab)

  14. Modifications of radiofrequency capacitive discharge for deposition of carbon coatings

    … were examined: an RF capacitive discharge with electron injection and removal by means of an emissive filament and a DC electrode, and an RF discharge with a hollow cathode powered electrode. Plasma characterization was conducted by means of an electrostatic probe and an energy and mass analysis …

    the-open-u Download PDF for Modifications of radiofrequency capacitive discharge for deposition of carbon coatings (opens in a new tab)

  15. NONLINEAR AND ULTRAFAST OPTICAL STUDIES OF INTERFACIAL PROCESSES IN PHOTOVOLTAIC NANOMATERIALS

    … conversion efficiency, the mechanism of the electron dynamics driving these systems remains controversial. This stems in part from the fact that the experimentally deduced time constants, which are characteristic of such systems, are only ever extracted from phenomenological models and …

    temple Repository record for NONLINEAR AND ULTRAFAST OPTICAL STUDIES OF INTERFACIAL PROCESSES IN PHOTOVOLTAIC NANOMATERIALS (opens in a new tab)

  16. Investigation on nanostructured solar cells

    … flame aerosol synthesis and flow-limited field-injection electrostatic spraying (FFESS). The new method provides good stability and reproducibility, demonstrating the generation of TiO2 nanoparticles with more flexibility in the control of their properties. The charged droplet size controlled by …

    uiuc Repository record for Investigation on nanostructured solar cells (opens in a new tab)

  17. Development of 8-Hydroxyquinoline Metal Based Organic Light-emitting Diodes

    … current OLED technology relates to inefficient electron injection at the cathode interface, which causes high driving voltage and poor device stability. Making a low resistance cathode contact for electron injection is critical to device performance. This work mainly focuses on cathode interface …

    toronto-retro Repository record for Development of 8-Hydroxyquinoline Metal Based Organic Light-emitting Diodes (opens in a new tab)

  18. Novel functional materials for polymeric light emitting diode applications

    … polycondensation. The aim is to achieve better electron injection properties and hence to improve electroluminance (EL) efficiency when these copolymers are used as either the emission layer or the electron injection layer in PLEDs. In the polymer design, the fluorene molecule is chosen to …

    nus Repository record for Novel functional materials for polymeric light emitting diode applications (opens in a new tab) Download file for Novel functional materials for polymeric light emitting diode applications (opens in a new tab)

Page 1 of 10