Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Electroplated copper"”.
-
Vibration analysis of electroplated copper compliant interconnects
… The interconnect used in the study is a 3-arc electroplated copper structure that serves as the Second-Level packaging interconnect. Random vibration loading is selected instead of sine sweep loading, as it produces a more realistic simulation of the conditions during application. A power …
-
Thermal annealing and mechanical characterization study of electroplated copper in silicon trenches
… studied. There still a gap to understand the copper microstructure in TSVs and similar structure. This work focus on how mechanical properties and microstructure change with thermal aging and thermal annealing in copper-filled TSVs and copper-plated silicon trenches. Both samples are …
-
Copper Electrodeposition Assisted by Hydrogen Evolution for Wearable Electronics: Interconnections and Fiber Metallization
… for rapid and localized electrochemical copper deposition that can be applied for integration of electronic circuits to printed circuit boards (PCBs) and fabrics for developing smart textile (e-textile) and advanced wearable electronics. This method has shown a great enhancement to the …
-
Assessing the tensile and fatigue behavior of aerosol jet printed nano silver particle traces on polyimide substrates
… In comparison to the much more widely researched electroplated copper or vapor deposited silver traces, AJP traces exhibit a stronger increase in electrical resistance for comparatively minor strains and they damage much faster under cyclic loading conditions. The fatigue behavior is seen to vary …
-
Thermomechanical stress studies for advanced copper metallization and integration
Thermomechanical stresses in the copper interconnects are directly related to void formation and interfacial delamination. In this study, the stress behavior of electroplated copper films was investigated using surface curvature measurement, with an emphasis on the passivation effect. It was found …
-
Design, modeling and fabrication of a copper electroplated MEMS, membrane based electric field sensor
… surface roughness to thickness ratio for the electroplated films. A lithography molding process was developed for the electroplating. Both dc and pulse plated films have been studied to show the role of pulse plating in improving the quality of the electroplated films. It was found during the …
-
Development of Wrinkled Surface for Enhanced Light Trapping in Organic Solar Cells
… replace vacuum deposited silver electrode with electroplated copper which is less expensive and better fits to the industry manufacturing. I also investigated a number of methods to fabricate optimum wrinkle structure that can be used as a light trapping vehicle for organic solar cells. I …
-
Thermal conductivity of bulk electrodeposited metal-diamond composite materials for thermal management applications
… the diamond particles were incorporated in electroplated copper matrix for achieving high thermal conductivity. Two different sized diamond particles were used: 66um and 420um. Surprisingly, only the 420um sized diamond particles exhibited an increase in the thermal conductivity, reaching …
-
Performance investigation of piezoelectric PVDF-TrFE polymer for it's mechanical and electrical response and use as vibration sensor
… tests. Another U-shaped sensor, incorporating electroplated copper, spin-coated PVDF-TrFE, and silver sputtering, was tested as a Lorentz force actuator and sensor. The sensor exhibited responsiveness to magnetic elds and sinusoidal voltages, highlighting its multifunctional capabilities. …
-
Reliability of Copper-Filled Stacked Microvias in High Density Interconnect Circuit Boards
… A stacked microvia is usually filled with electroplated copper to make electrical interconnections and provide structural support. A challenge for HDI circuit board processing is to fabricate microvias without generating defects in the deposited copper structures. Firstly, the copper …
-
Fatigue analysis of microstructures
… around their mechanical resonance frequency fr. Copper, due to its vast application in semiconductor industry and in MEMS devices, was used for the fabrication of test the specimens. Latest microfabrication techniques, i.e. electric discharge machining edm, laser cutting, wet-etching and …
-
Electrical discharge machining of non-conductive advanced ceramics
… identified between the pulses during µ-EDM of copper and non-conductive ceramics. The most evident difference is the absence of reverse current on the pulses of non-conductive ceramics. The signals recorded at a sampling rate of 100 MS/s during µ-EDM of a 1 mm deep hole on copper and …