Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 94 for “"Electrowinning"”.
-
Improving base metal electrowinning
<p>"In zinc electrowinning, Mn oxidizes to form MnO<sub>2</sub> on Pb-Ag anodes, cell walls and pipes. MnO<sub>2</sub> reduces anode corrosion but also leads to short circuits and maintenance issues. MnO<sub>2</sub> is thought to interact with chloride ions and produce oxidized chlorine species. …
-
Copper electrowinning from cyanide solutions
… and practical aspects o f two options for electrowinning copper from cyanide solution. These two options are: (a) the use o f an alternative anode reaction to limit the electro-oxidation o f cyanide in concentrated cyanide solutions and (b) the use of a graphite fibre cathode to electrowin …
-
Dynamic process simulation of zinc electrowinning
Zinc electrowinning is the final aqueous processing step in the production of metallic zinc. It is a complex process that is difficult to control and monitor. This thesis seeks to develop a time transient process simulation of zinc electrowinning to aid in controlling and monitoring. Based on …
-
Mechanisms of acid mist formation in electrowinning
Acid mist is generated during electrowinning in the final stage of hydrometallurgical production processes of metals including copper, zinc and nickel. In electrowinning, oxygen bubbles are formed on the anode. Burst of these bubbles at the solution/air interface produces fine acid-containing …
-
Electrochemical evaluation of anodes in lead electrowinning
… and electrochemically attractive anode in the electrowinning step. A high reaction rate of oxygen evolution and a low generation of lead dioxide are necessary to ensure a satisfactory efficiency. One way to inhibit the formation of lead dioxide is by employing additives, such as phosphorus or …
-
Corrosion of lead anodes in metallic electrowinning environments
The corrosion of anodes in electrowinning is costly because of their relatively short lifespan, material cost, and their impact on cathodic deposit quality. The objective of this thesis was to understand the corrosion behavior of Pb anodes in electrolyte simulating Zn and Ni electrowinning …
-
An investigation of some aspects of cerium electrowinning
… heat balance model of a pilot plant scale cerium electrowinning cell was developed to improve cell design. The results of the model showed that most of the heat is lost through the anodes. The model showed that reducing the number of anodes and increasing their size would reduce heat losses, and …
-
Fundamental aspects of nickel electrowinning from chloride electrolytes
Nickel electrowinning from chloride electrolytes is an innovative and efficient process developed and commercialized mainly by Falconbridge Ltd. Several fundamental aspects related to this process have been addressed in this thesis, including the thermodynamic study of nickel electrolytes, the …
-
Composite electrodes for oxygen evolution in metal electrowinning
… is the most common anode reaction in the electrowinning (EW) of metals from acidic sulfate based electrolytes and is a reaction that requires high activation overpotentials. Since the the oxygen evolution reaction contributes roughly 500-800 mV to the cell voltage which is roughly 15-25% …
-
Inert anodes for aluminium electrowinning: nickel ferrite based cermets
Greenhouse gases including carbon dioxide are formed by the consumption of carbon anodes during aluminium production, making it a major contributor to global emissions. This consumption necessitates replacement of the anodes in electrolysis cells every 2-3 weeks. A solution to the environmental and …
-
Current-potential effects of trace impurities in manganese electrowinning
The purpose of this investigation was to study the effects of trace metallic impurities, found in manganese electro-winning solutions, on cathode current-potential curves. This investigation led to the development of a novel analytical tool, emphasizing polarization curves as a means of detecting …
-
Electrochemical characterization of impurities and additives in zinc electrowinning
… present in industrial electrolytes used in zinc electrowinning. The most deleterious impurities such as Ge, Sb, As, and Ni cause excessive hydrogen evolution and localized zinc corrosion, thus decreasing the current efficiency and quality of the zinc cathode. In this research, attempts have been …
-
Solvent extraction processing of oxidized zinc wastes for electrowinning
… purification by solvent extraction, on the zinc electrowinning efficiency and the characterization and evaluation of zinc electrolytes produced from waste oxides generated by the Ausmelt Pyroprocessing. The removal of cadmium ions from di-(2-ethylhexyl) phosphoric acid (D2EHPA) solvent extractant …
-
Modeling and fault detection of an industrial copper electrowinning process
Copper electrowinning plants are where high purity copper (Cu) product is obtained through electrochemical reduction of copper from the leaching solution. The presence selenium (Se) and tellurium (Te) in copper sulphide minerals may result in contamination of the leach solution and, eventually of …
-
Current-potential effects of trace impurities in manganese electrowinning-II
… non-metallic impurities, found in manganese electrowinning solutions, on cathode current-potential curves have been investigated. Five impurities, e.g., Sulfur-dioxide, Ammonium Sulphide, Urea, Thiourea, and Gelatine were studied.</p><p>In the first phase of the study the effect of individual …
-
Application of a porous diaphragm in a calcium electrowinning cell
Includes bibliographical references (pages 105-109).
-
Development of an iron electrowinning process using anion exchange membranes
… methods, anion exchange membrane-based electrowinning (EW) is proposed in this study for the treatment of SLSs. The use of specifically anion exchange membranes (AEMs) during EW (AEM-EW) enables the recovery of both electrolytic iron and the regeneration of the leaching acid for re-use …
Page 1 of 5