Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 18 of 18 for “"Element erosion"”.
-
Response and failure mechanisms of structural member under high velocity impact
… model. Numerical studies involving the finite element method (FEM) suffers from severe element distortion problem when subjected to HVI, which can be either resolved by adopting the element erosion approach in the FEM or by implementing the coupled smooth particle hydrodynamics (SPH) - FEM …
-
Multi-Physics Smoothed Particle Hydrodynamics Implementation to Enhance Vertebral Fracture Prediction in a Finite Element Model of a Lower Cervical Spine Segment Under Compression
… potential of a spinal cord injury (SCI). Finite element (FE) human body models (HBMs) provide an opportunity to predict vertebral fractures and investigate SCIs. Models such as the Global Human Body Models Consortium (GHBMC) model use strain-based element erosion to model hard tissue fracture by …
-
Taylor Impact Test and Penetration of Reinforced Concrete Targets by Cylindrical Composite Rods
We use the three-dimensional finite element code DYNA3D to analyze two problems: (a) the normal impact of a cylindrical monolithic or composite rod against a smooth flat rigid target, (commonly known as the Taylor impact test), and (b) the penetration of composite and monolithic steel cylindrical …
-
LS-DYNA3D Modeling and Simulation for Uncontained Engine Debris Impact on Fuselage Skins
… skins are simulated using the LS-DYNA3D finite element analysis code. The LS-DYNA3D code is a nonlinear transient dynamic simulation tool with contact algorithms for impact. A finite element analysis is used to simulate the penetration of aluminum plates impacted by titanium impactors on …
-
Predicting the Mechanical Response of H100 PVC Foam from Mesostructural Finite Element Analysis
This thesis presents a mesoscale finite element (FE) framework for predicting the mechanical response and fracture behavior of Divinycell H100 foam used as a core material in sandwich structures. Stochastic multi-cell statistical volume element (SVE)s were generated using tessellation-based …
-
Numerical simulation of continuous miner rock cutting process
… namely the Finite Difference Method, the Finite Element Method, the Boundary Element Method, and the Discrete Element Method, are reviewed. The Finite Element Method is then chosen as the simulation tool because it is more advanced and versatile than the other methods.;The rotation and advance of …
-
Behavior of reinforced concrete column-beam joint subjected to close in blast loads with polyurea and FRP sheets
… joint under close-in blast loads using finite element modeling in LS-DYNA with an Arbitrary Lagrangian-Eulerian (ALE) formulation. Failure is captured through element erosion based on maximum principal strain. The study employs concrete with a compressive strength of 38.5 MPa and reinforcing …
-
Experimental and Numerical Investigation of Rock Drilling Accelerated Through Cracking
… high-pressure downhole conditions using finite element analysis. A 3-D finite element model rock cutting model was created using a pressure sensitive yield criterion in conjunction with a damage criterion to model element erosion. The results showed that the pre-induced cracks reduce the cutting …
-
Experimental and finite element modelling of ultrasonic cutting of food
… and experience of the tool designers. Finite element (FE) models have also been used to predict the vibrational behaviour of the cutting tool. However, the performance of an ultrasonic device critically relies on the interaction of the cutting tool and material to be cut. Currently the …
-
Numerical Modeling of Failure in Magnesium Alloys under Axial Compression and Bending for Crashworthiness Applications
… model 124, where failure was simulated using the element deletion method. LS-DYNA material model 124 (MAT_124) was calibrated using stress-strain curves in compression and tension. This approach, combined with MAT_124, captures the material asymmetry. Comparisons with experiments showed that the …
-
Numerical Methods for Fluid-Solid Coupled Simulations: Robin Interface Conditions and Shock-Dominated Applications
… viscous flow solver with a nonlinear finite element solid solver. Both an analytical study and a numerical study reveal that the new algorithm can clearly outperform conventional Dirichlet-Neumann procedures in terms of both stability and accuracy, when the parameter value is carefully …
-
Investigation of Structures Featuring Curvilinear Anisotropy: Application to Electrostatic Problem and Mechanical Response
… scenarios in finite domains. The finite element method is used to determine the optimal reinforced configuration for a notched specimen. The second objective is to assess the ability of optimal reinforced configuration in the application of damage detection or health monitoring by …
-
LOW VELOCITY IMPACT DAMAGE OF COMPOSITES
… approach combining experimental tests and finite element modelling was adopted to simulate the low-velocity impact response and damage of laminated woven composites. A finite element code (DYNA3D) was employed to model the three-dimensional dynamic behaviour of the woven laminate. Each ply was …
-
Modelling progressive collapse of timber buildings and its applications
… was developed. It uses a combination of finite element analysis, analytical equations, and results from impact loading tests. The modelling framework can simulate the progressive collapse of timber buildings with members following an orthogonal grid subjected to arbitrary initial damage …
-
Performance of surface structures subjected to subsurface soil erosion
… throughout the service life of the structure. Erosion of the subgrade soil is a common mechanism that can lead to the development of subsurface voids and consequently a contact loss between the structure and the supporting soil characterized by a void space under the structure. The performance …
-
Stratigraphic evolution and architectural analysis of structurally confined submarine fans: a tripartite outcrop-based study
… diversity and compensational stacking of elements through time. These patterns are attributed to an increase in depositional area, and a decrease in accommodation relative to sediment supply (A:S), as the bowl-shaped basin filled. Isopach mapping reveals a prominent thick, which nearly …
-
Computational Modeling of Hard Tissue Response and Fracture in the Lower Cervical Spine under Compression Including Age Effects
… majority being burst fractures. Detailed finite element human body models (HBMs) have been utilized to assess the safety of occupants and pedestrians in crash scenarios, augmenting the results from crash test dummies in physical tests. HBMs can predict the potential for injury and provide data …