Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Elliptical Cylinder"”.
-
Response and Failure of Internally Pressurized Elliptical Composite Cylinders
… to study the response of internally pressurized elliptical composite cylinders with clamped boundaries. Using a geometrically linear analysis and the solution scheme, the response of a quasi-isotropic elliptical cylinder is compared with the response of a quasi-isotropic circular cylinder in …
-
COMPUTATIONAL FLUID DYNAMICS SIMULATION OF RAIN-WIND-INDUCED VIBRATION OF STAY CABLES
… literatures are two-dimensional, and a circular cylinder has been widely adopted to represent the stay cables. Thus, only the wind flow normal to the stay cable axis has been taken into account. Such simplifications may be inappropriate, since some key factors are completely ignored, such as the …
-
Improvement of the axial buckling capability of elliptical cylindrical shells
… expressions for the buckling stress in terms of cylinder geometry and orthotropic material properties are presented, the particular closed form depending on the specific character of the orthotropic material relative to the GMI material. With the formulation, the specific character of the …
-
Non-Linear Time Domain Simulation of Moored Floating Systems
… explained. The tanker is modelled as a vertical elliptical cylinder with a finite draught. Calculated wave forces are compared with Oortmerssen's experiments and with the results of a 3-D program developed by Chan. The water depth effect on wave forces is investigated. Program results for various …
-
Theoretical study of laminar film condensation on horizontal elliptical tubes under conditions of free and forced convection
… of laminar film condensation on a horizontal elliptical cylinder in a pure saturated vapor under conditions of free and forced convection. Estimation of interfacial shear stress was made in two ways: the first involving an asymptotic value of the shear stress under condition of infinite …
-
Evaluating critical design parameters of small airships through analytical tools
… sphere, oblate ellipsoid, prolate ellipsoid, and elliptical cylinder are analyzed using custom and general analytical tools, with results validated through numerical and an- alytical methods. The available results are presented into a collective use cases along with several use cases utilizing the …
-
On the Location and Number of Expansion Centers of Multiple Multipole Expansion Method
… from an infinitely long conducting circular and elliptical cylinder and an inductive post inside a waveguide. In each case, values of M and N are obtained that yield minimum discrepancy at the boundary. Numerical results obtained here agree with previous work obtained by trial and error means as …
-
Symmetric Frameworks on Surfaces
… given for a symmetric framework on the sphere, cylinder, cone, elliptical cylinder and ellipsoid to be isostatic (i.e. minimally infinitesimally rigid) under any finite point group symmetry. In Chapter 4 we focus exclusively on the cylinder. In every case when the symmetry group is cyclic, which …
-
Reduced-order modelling of fluid flows using analytical and numerical methods
Coating the exterior of a cylinder with a layer of fluid is a fundamental problem in fluid mechanics and occurs in numerous natural processes and industrial applications, such as heat and mass transfer and the production of orthopaedic implants. This thesis formulates and analyses novel models for …
-
A novel boundary element method for low Reynolds number external flow of biological fluid dynamics
… the problems of steady flow past a circular cylinder, steady flow past an elliptical cylinder, and the motion of a generic tail-like body are investigated. The theoretical treatment by Chadwick (Chadwick, 2013) is detailed and elaborated upon. Aboundary integral representation that matches an …
-
Estimating Body Segment Inertial Parameters of the Human Body Using a Microsoft Kinect
… were compared to estimates obtained using an elliptical cylinder model (ECM) (Jensen 1978) and to estimates obtained using regression equations developed from medical imaging techniques (Zatsiorsky and Seluyanov 1983). The body volume estimates using the Kinect demonstrated high repeatability …
-
Global optimization of optical metasurfaces using the RCWA method
… that the positions, radii and rotation of the elliptical cylinder metaatoms used for the metasurface were varied. It is possible to optimize a grating that bends normal incident light with an angle given by the periodicity of the metasurface in one direction. When slowly varying the periodicity …
-
Torsion of Elliptical Composite Cylindrical Shells
The response of elliptical composite cylindrical shells under torsion is studied. The torsional condition is developed by rotating one end of the cylinder relative to the other. Prebuckling, buckling, and postbuckling responses are examined, and material failure is considered. Four elliptical cross …
-
Use of Material Tailoring to Improve Axial Load Capacity of Elliptical Composite Cylinders
… improvement of the axial buckling capacity of elliptical composite cylinders through the use of a circumferentially-varying lamination sequence. The concept of varying the lamination sequence around the circumference is considered as a viable approach for off-setting the disadvantages of having …
-
Flow-Induced Vibration of Elastically Mounted Cylinder-Plate Assemblies
… vibration (FIV) of an elastically supported cylinder-plate assembly (viz., a rigid splitter-plate attached to the downstream side of a cylinder) is investigated deeply and systematically in this thesis, using the numerical simulation based on Computational Fluid Dynamics (CFD) and the …
-
Three dimensional modelling of Electrical Impedance Tomography
… analytical solution for a finite right circular cylinder (which approximately models the human thorax) on which two electrodes have been placed, is derived. It will be shown that the analytical solution has two different forms. Results will be presented detailing the convergence performance of …
-
Vibration Characteristics of Thin-Walled Noncircular Composite Cylinders
… noncircular fiber-reinforced composite cylinders, specifically cylinders with elliptical cross sections, are investigated. Of interest is the variation of the lowest natural frequency, the so-called fundamental frequency, as a function of wall laminate properties, cross-sectional …
-
Manual therapy and the osteoporotic spine
… BMD can be accurately estimated using the elliptical cylinder method. Trabecular thickness differs significantly between the spinous process and lamina regions, and may have influenced the site of fracture (p=0.003). Cadaveric studies of spine kinematics during PA mobilization showed that …
-
Liquid-film coating on rotating discrete objects
… of coating flows on discrete objects, we pick cylinders that rotate about their horizontal axes as model discrete objects and investigate four model problems highly relevant to industrial coating processes for rotating discrete objects. In each model problem, the interplay among all the forces …
-
Effect of Second Order Forces on Steady Tilt Behaviours and Some Applications in Dynamic Positioning Aspects of Twin Hulled Marine Vehicles
… dynamics of two rigidly connected submerged cylinders in waves and the two dimensional radiation and diffraction problems are investigated with the forward speed effect (equivalent current effect). Under a linear assumption of the boundary value problem, the numerical solution is obtained …