Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Elliptical cylinders"”.

  1. Elastic Wave Manipulations via 3D-printed Chains of Hollow Elliptical Cylinders

    … the chains are composed of 3D-printed hollow elliptical cylinders (HECs). 3D-printing provides us the freedom of altering the design of the HECs, hence offering high tunability of the HEC lattice chains. This implies that we can assemble different systems for various wave manipulations. First, …

    washington Repository record for Elastic Wave Manipulations via 3D-printed Chains of Hollow Elliptical Cylinders (opens in a new tab)

  2. Symmetric flow past orthotropic bodies : single and clusters

    … obtained for two-dimensional symmetric flow past elliptical cylinders, with the flow parallel to the major axis for aspect ratios of 0.995 to 0.2 at Reynolds numbers up to 90, and with the flow parallel to the minor axis for an aspect ratio of 0.2 at Reynolds numbers up to 40. The numerical …

    ubc Repository record for Symmetric flow past orthotropic bodies : single and clusters (opens in a new tab) Download PDF for Symmetric flow past orthotropic bodies : single and clusters (opens in a new tab)

  3. Design and Optimization of Inverse Phononic Crystals in Gallium Arsenide for Enhanced Surface Acoustic Waveguiding

    … alternative geometries, including ellipsoids and elliptical cylinders, demonstrate significant improvements. The research culminates in the design of a four-inclusion wide waveguide using elliptical cylinders, which achieves logarithmic reciprocal attenuation ten orders of magnitude better than …

    queens Repository record for Design and Optimization of Inverse Phononic Crystals in Gallium Arsenide for Enhanced Surface Acoustic Waveguiding (opens in a new tab)

  4. The study of Karman vortex shedding for elliptical and rectangular cylinders

    … experimentally with a hot film anemometer behind elliptical and rectangular cylinders at 0, 30, 60, and 90 deg angles of attack between Reynolds number of approximately 2000 and 23000. The ellipses were of eccentricity 0.650, 0.866, and 0.950 with the rectangles cross section width to length ratio …

    ut-knoxville Repository record for The study of Karman vortex shedding for elliptical and rectangular cylinders (opens in a new tab)

  5. Oblique scattering/hybrid wave propagation in elliptical homogeneous configurations & spectrum/preconditioning of the singular domain integral equation

    … of the electromagnetic scattering by dielectric elliptical cylinders under oblique illumination is studied. The problem is solved using the elliptical wavefunctions. The cross sections of the problem are calculated. Then the corresponding inner problem i.e. of hybrid wave propagation in …

    greece Repository record for Oblique scattering/hybrid wave propagation in elliptical homogeneous configurations & spectrum/preconditioning of the singular domain integral equation (opens in a new tab)

  6. Torsion of Elliptical Composite Cylindrical Shells

    The response of elliptical composite cylindrical shells under torsion is studied. The torsional condition is developed by rotating one end of the cylinder relative to the other. Prebuckling, buckling, and postbuckling responses are examined, and material failure is considered. Four elliptical cross …

    vt Repository record for Torsion of Elliptical Composite Cylindrical Shells (opens in a new tab)

  7. Response and Failure of Internally Pressurized Elliptical Composite Cylinders

    … to study the response of internally pressurized elliptical composite cylinders with clamped boundaries. Using a geometrically linear analysis and the solution scheme, the response of a quasi-isotropic elliptical cylinder is compared with the response of a quasi-isotropic circular cylinder in …

    vt Repository record for Response and Failure of Internally Pressurized Elliptical Composite Cylinders (opens in a new tab)

  8. NANOTECHNOLOGIES FOR SINGLE-MOLECULE MANIPULATION AND MEASUREMENT

    … a new class of biocompatible metamaterial elliptical cylinders is designed and fabricated as high-rotation-speed and high-torque-resolution probes for the AOT. This new class of AOT trapping particle opens opportunities for previously inaccessible rotational studies of DNA-based processes. …

    cornell Repository record for NANOTECHNOLOGIES FOR SINGLE-MOLECULE MANIPULATION AND MEASUREMENT (opens in a new tab)

  9. Evaluating critical design parameters of small airships through analytical tools

    … sphere, oblate ellipsoid, prolate ellipsoid, and elliptical cylinder are analyzed using custom and general analytical tools, with results validated through numerical and an- alytical methods. The available results are presented into a collective use cases along with several use cases utilizing the …

    ets-quebec Download PDF for Evaluating critical design parameters of small airships through analytical tools (opens in a new tab)

  10. Measuring Ground Movement by Precise Survey

    … expressed in the form of 95 percent error elliptical cylinders were in the order of 7 mm horizontally and 2 mm vertically at distances of 150 metres. This accuracy was more than adequate considering the relatively large amount of slide movement. The techniques and procedures set forth in …

    sask Repository record for Measuring Ground Movement by Precise Survey (opens in a new tab)

  11. The Aeroacoustics and Aerodynamics of a Cylinder Above a Plate

    … body aerodynamics and aeroacoustics. In reality, cylinders are rarely isolated in uniform flow, but can be adjacent to larger walls or plates. Such boundaries constrain the flow on one side of the cylinder and may introduce turbulence through a turbulent boundary layer. These complications alter …

    unsw Repository record for The Aeroacoustics and Aerodynamics of a Cylinder Above a Plate (opens in a new tab)

  12. Failure Initiation and Progression in Internally Pressurized Non-Circular Composite Cylinders

    … in internally pressurized non-circular composite cylinders. This type of approach accounts for the localized loss of stiffness when material failure occurs at some location in a structure by degrading the local material elastic properties by a certain factor. The manner in which this degradation …

    vt Repository record for Failure Initiation and Progression in Internally Pressurized Non-Circular Composite Cylinders (opens in a new tab)

  13. An analog/hybrid computer solution of electromagnetic scattering problems

    … itself. The scatterers studied included circular cylinders, elliptical cylinders, and an annulus, and both perfect conductors and perfect dielectrics were considered. Also, scattering from an irregular object was studied to show the versatility of the method.

    vt Repository record for An analog/hybrid computer solution of electromagnetic scattering problems (opens in a new tab)

  14. Improvement of the axial buckling capability of elliptical cylindrical shells

    … By using the maximum radius of curvature of an elliptical cross section in this formulation, the analysis is used to demonstrate the detrimental effects of an elliptical cross section on axial buckling capacity when compared to a circular cross section with the same circumference. Using the …

    vt Repository record for Improvement of the axial buckling capability of elliptical cylindrical shells (opens in a new tab)

  15. An analytical and experimental investigation of the response of elliptical composite cylinders

    … investigation of the response of composite cylinders of elliptical cross-section to axial compression and internal pressure loadings is discussed. Nine eight-ply graphite-epoxy elliptical cylinders, three layups for each of three cross sectional aspect ratios, are specifically examined. The …

    vt Repository record for An analytical and experimental investigation of the response of elliptical composite cylinders (opens in a new tab)

  16. Coating and Drying of Rotating Discrete Objects

    … examine three model problems of flow on rotating cylinders, a useful model geometry to examine coating behavior on discrete objects. For the flow of a volatile, particle-laden liquid film on rotating cylinder, lubrication theory has been used to derive a set of evolution equations describing …

    umn Repository record for Coating and Drying of Rotating Discrete Objects (opens in a new tab)

  17. Liquid-film coating on rotating discrete objects

    … of coating flows on discrete objects, we pick cylinders that rotate about their horizontal axes as model discrete objects and investigate four model problems highly relevant to industrial coating processes for rotating discrete objects. In each model problem, the interplay among all the forces …

    umn Repository record for Liquid-film coating on rotating discrete objects (opens in a new tab)

  18. Stability of thin-walled metal tubes with elastic uni-lateral internal restraint.

    … as the elastic buckling of square, circular and elliptical thin-walled steel tubes, when filled with elastic material. The elastic local buckling of a rectangular plate having four edges clamped and subjected to in-plane linearly varying uniaxial loading with and without juxtaposition with a …

    unsw Repository record for Stability of thin-walled metal tubes with elastic uni-lateral internal restraint. (opens in a new tab)

  19. CHIRAL POLYAMIDOAMINO ACIDS WITH POTENTIAL FOR BIOTECHNOLOGICAL APPLICATIONS

    … 8.80) to an elongated rod (pD 7.30) described by elliptical cylinders of 487.6 ± 21.2 Å length and 2.88 ± 0.19 axis ratio (Figure. 1a, black curve). NaDC/ARGO7 mixtures were prepared adding 5 mg mL-1 of NaDC to 0.5 mg mL-1 solution of D-, L-, D,L-ARGO7 and an equimolar mixture obtained by mixing …

    milano Repository record for CHIRAL POLYAMIDOAMINO ACIDS WITH POTENTIAL FOR BIOTECHNOLOGICAL APPLICATIONS (opens in a new tab)