Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Embedded Plate"”.
-
Numerical Study of Suction Embedded Plate Anchor
Suction embedded plate anchor (SEPLA) is a viable deep water mooring system due to advantages in terms of low cost, accurate positioning, short installation time and high efficiency. The objective of this thesis is to address issues related to the application of SEPLAs as a permanent mooring …
-
Embedded Plate Anchorage Strength in Precast Hollowcore Slabs
… elements bycasting a headed stud embedment plate in the hollowcore. This provides an area that can be welded to the supporting elements. When the supporting elements consist of foundation retaining walls or exterior walls, load is applied to the supporting element and is transferred to the …
-
Passive earth pressure on embedded plate anchors in sand
Earth pressure on anchor plates is considered a viable resisting force for the design of underground structures. The theories available in the literature overestimate the earth pressure on these anchors, leading to unsafe design and perhaps loss of structures and lives. The present investigation is …
-
Embedded Plate Connection Between Hollow-Core Slabs and Concrete Walls
… new slab-to-wall connection that consisted of an embedded steel plate and stud in the hollow-core. The capacity of the plate assembly embedded in a hollow-core slab was established by directly loading the assembly until steel or concrete failure. Proof-of-concept subassembly testing was conducted …
-
FINITE ELEMENT INVESTIGATION INTO THE PERFORMANCE OF EMBEDDED PLATE ANCHORS IN SAND
… as piles, suction caissons and direct embedment plate anchors. Of these options, plate anchors are particularly attractive due to their compact size, light weight, variety of installation techniques, and highly efficient and suitable for a wide range of soil conditions. However, more reliable …
-
Laboratory model tests on drag and dynamically embedded plate anchors in layered clay profiles
… (1) the drag trajectory and capacity for a drag embedded plate anchor in layered soil profiles; (2) the drag trajectory and capacity of tandem drag embedded plate anchor systems; and (3) the free-fall penetration trajectory and resistance of a dynamically embedded plate anchor in layered soil …
-
A contribution to the study of the performance of steel pipe piles welded to concrete pier cap beams under seismic loads
… full strength, overhead weld connecting it to an embedded plate which is cast into the precast concrete abutments and pile caps. The steel piles are intended to undergo plastic hinging; however, a high quality overhead weld is not easy to achieve under adverse site conditions. The performance of …
-
Undrained behavior of plate anchors subjected to general loading
… method for predicting the undrained behavior of plate anchors, including out-of-plane loading of simple plates and performance of suction embedded plate anchors (SEPLA). Three dimensional finite element models are used to investigate the behavior of square and rectangular plate anchors under …
-
Performance of Plate Anchors
Suction Embedded Plate Anchors (SEPLA) are vertically loaded anchors which are installed by using a suction caisson to the required embedment depth. The cost effectiveness, ease of installation and the accuracy of the installation makes it an attractive choice for deep to ultra-deep waters. After …
-
In Situ Diagnostics for Multiple Allergens in Food
… installation and loading behaviour of two novel plate anchor foundation concepts. <br/><br/>The concept for a Bi-wing Anchor which can be dropped through the water column and penetrate into the seabed under its own weight was introduced. After dropping, the anchor could then be dragged, causing …
-
Plate anchors for offshore foundations in sand and clay
… installation and loading behaviour of two novel plate anchor foundation concepts. <br/><br/>The concept for a Bi-wing Anchor which can be dropped through the water column and penetrate into the seabed under its own weight was introduced. After dropping, the anchor could then be dragged, causing …
-
Transverse Sub-Assemblage Testing of the Inverted-T Bridge System
The inverted-T bridge system is a rapid bridge construction technique that consists of precast inverted-T girders placed adjacent to one another and covered with a cast-in-place deck. This system was first implemented in the U.S. by the Minnesota Department of Transportation (Mn/DOT). This research …