Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 166 for “"Emission Source"”.
-
Emission source microscopy for electromagnetic interference source localization
"For complex and large systems with multiple sources, it is often difficult to localize the sources of radiation. Near-field electromagnetic scanning is used often for root-cause diagnosis by determining field distribution close to the PCB. In the near-field, the evanescent waves are dominant, …
-
Acoustical emission source location in thin rods through wavelet detail crosscorrelation
… waves that can be detected through acoustical emission techniques. The transient nature of a stress wave is analytically inconsistent to Fourier Transforms, and the wave characteristics under the effects of dispersion and attenuation deviate from the formal basis of the Windowed Fourier …
-
Acoustic emission source location in composite aircraft structures using modal analysis
… of this research work was to develop an Acoustic Emission (AE) source location method suitable for Structural Health Monitoring (SHM) of composite aircraft structures. Therefore useful key signal features and sensor configurations were identified and the proposed method was validated using both …
-
Tracking ammonia volatilization and fate from emission source to pristine ecosystem
… management has been closely tied to ammonia emission and therefore negative impacts of ammonia pollution. The aim of this research is to improve our current understanding of how ammonia is lost from native and agricultural soils and if nitrogen isotopes can be used to elucidate what sources …
-
Acoustic Emission Source Characterization of Fatigue Crack Extension in Steel Bridge Material
The probability of Acoustic Emission (AE) detection associated with fatigue crack extension in steel bridge components is a difficult problem due to the complexity of the AE sources. AE is a very promising technique for structural health monitoring and automated micro-crack detection as it is …
-
Analytical Evaluation of an Atmospheric Pressure Glow Discharge Microplasma as an Emission Source
… by Marcus and co-workers, is a novel excitation source for atomic emission spectroscopy developed to meet these goals. This emission/ionization source meets the demands needed for field-capable instrumentation by being cost efficient and having a small footprint, low power consumption, high …
-
THE GLOW DISCHARGE - A MULTIFACETED OPTICAL EMISSION SOURCE: FROM SOLIDS ANALYSIS TO METALLOPROTEINS
… analysis of metals and alloys by optical emission spectroscopy (GD-OES). The most successful application of GD-OES has been the analysis of solid materials since the GD provides rapid, direct bulk and depth profiling analysis of solids, metals, powders, polymers, glasses and ceramics. …
-
On Novel Machine Learning Approaches for Acoustic Emission Source Localisation: A Probabilistic Perspective
… a promising solution the monitoring of acoustic emissions, a technique concerned with passively listening to ultrasonic signals generated by damage mechanisms. With that said, a significant barrier to a more widespread adoption of techniques of this nature are their use in structures with …
-
Development of Inverse Modeling Method for Emission Source Identification in River Pollution Incidents
… Inverse models play an essential role in source identification based on limited concentration data observed at monitoring sites. However, most studies have been conducted on the inverse inference of pollution sources in atmospheric and groundwater environments. Few studies have focused on …
-
Improving Forecasts of Volcanic Clouds: An Analysis of Observations and Emission Source Term Methods
… Earth Observing System, Version 5 (GEOS-5). The emission source terms describing the initial state of the Eyjafjallajökull ash clouds were estimated using radar observations of the ash cloud’s initial injection altitude. Results of the initial simulations agreed with operational ash forecasts …
-
Experimental and Analytical Study on the Particulate Entrainment and Dispersion From a Porous Emission Source in Wind
… of entrained particulates from a porous emission source in wind such as storage pile are studied. The mechanisms of particulate entrainment and downwind particulate dispersion are experimentally determined with the use of two porous pile models of different heights: a 51 mm high model and …
-
Quantitative evaluation of rejuvenators to restore embrittlement temperatures in oxidized asphalt mixtures using acoustic emission source location techniques
… investigated in this study using acoustic emission analysis and source location techniques. Four asphalt specimens, which have been oven-aged for 36 hours, were tested using the same acoustic emission approach after two, four, six, and eight weeks dwell time after being rejuvenated. …
-
Data-Driven Predictive Modeling to Enhance Search Efficiency of Glowworm-Inspired Robotic Swarms in Multiple Emission Source Localization Tasks
… search efficiency of robotic swarms in multiple emission source localization tasks. The problem formulation and methods are presented, followed by numerical simulations to illustrate the working of the algorithm. Results from a comparative analysis show that the GPR-GSO algorithm exceeds the …
-
Inductively coupled plasma spectrometry: noise characteristics of aerosols, application of generalized standard additions method, and Mach disk as an emission source
… performance of inductively coupled plasma (ICP) source;The noise characteristics of aerosols produced by ICP nebulizers are investigated. A laser beam is scattered by aerosol and detected by a photomultiplier tube and the noise amplitude spectrum of the scattered radiation is measured by a …
-
Proof-of-Concept Inverse Micro-Scale Dispersion Modelling for Fugitive Emissions Quantification in Industrial Facilities
… was conducted to locate and quantify fugitive emissions within a gas processing plant with inverse micro-scale dispersion modelling. A synthetic wind field and receptor observations were generated for a simplified model of a gas processing plant. Source reconstruction was performed with an …
-
Source contribution modeling of probable source-types' emissions of particulate toxic trace elements near Knoxville, Tennessee : a screening method
… contributed by anthropogenic and natural sources. Emission source-types were determined from particulate matter ≥ 10 microns sample data collected in Knoxville, Tennessee for one year beginning in September, 1990. After surveying the sampled area for probable sources, emission source …
-
Fabrication and Analysis of Multilayer Structures for Coherent Thermal Emission
… and experimental study on coherent thermal emission from thin-film multilayer structures. A novel multilayer structure consisting of a one-dimensional photonic crystal and a polar material (or a metal) is proposed as a coherent thermal-emission source. Surface electromagnetic waves can be …
-
Growth loss of loblolly pine (Pinus taeda L.), white pine (P. strobus L.) and sycamore (Platanus occidentalis L.) proximal to a periodic source of air pollution
The effect of a periodic source of a NO<sub>x</sub>-SO₂ air pollution regime on the growth of forest trees was investigated. Radial increment growth studies were conducted to determine if correlations existed between emission levels of a source (predicted by production levels) and radial increment …
-
Electrodeless discharge bulbs
… has been extensively studied as a new light emission source. The process of using H2S as a source of sulfur in the electrodeless discharge bulbs has been examined and used in the production of mixed gas bulbs. The recording of spectra has also been used in a brief investigation of spectral …
-
Role of magnetic resonance and wave interference in tailoring the radiative properties of micro/nanostructures
… effects to achieve tunable coherent thermal emission or enhanced optical transmission; (2) microfabrication of the designed structures; and (3) development of a high-temperature emissometer to experimental demonstrate coherent thermal emission from fabricated samples at temperatures from 300 …
Page 1 of 9