Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"End Notched Flexure"”.

  1. Statistical estimation of strain energy release rate of delaminated composites

    … composite plates. Double cantilever beam and end-notched flexure models of unidirectional and multidirectional composite plates with mid-plane and offset delaminations are analyzed. The total strain energy release rate and the mode-I, mode-II and mode-III components are evaluated using a …

    wvu Repository record for Statistical estimation of strain energy release rate of delaminated composites (opens in a new tab)

  2. Comprehensive Investigation of Quasibrittle Fracture of IM7/977-3 Laminates via Size Effect Analysis

    … Four types of tests, including Single-Edge Notched Tension (SENT), Double-Edge Notched Tension (DENT), Double Cantilever Beam (DCB), and End-Notched Flexure (ENF), are conducted to examine the fracture in the above-mentioned modes. In addition, Digital Image Correlation (DIC) is used to …

    washington Repository record for Comprehensive Investigation of Quasibrittle Fracture of IM7/977-3 Laminates via Size Effect Analysis (opens in a new tab)

  3. Fracture of advanced polymer composites with nanofiber reinforced interfaces

    … (Dzenis and Reneker: US patents awarded and pending). Edge delamination was studied on graphite/epoxy composites reinforced by continuous electrospun polymer nanofibers with the diameter around 300 nm. Statistically significant improvements in both edge delamination onset stress and ultimate …

    nebraska Repository record for Fracture of advanced polymer composites with nanofiber reinforced interfaces (opens in a new tab)

  4. Dynamic Fracture Toughness of Polymer Composites

    … desired dynamic properties. Single edge notch bend(SENB) type geometry is used for Mode-I fracture testing and similarly end-notched flexure (ENF) type of geometry is proposed to test the samples for Mode-II type of fracture. Two different linear elastic fracture mechanics approaches are used- …

    tamu Repository record for Dynamic Fracture Toughness of Polymer Composites (opens in a new tab)

  5. The effect of cure cycle on microstructure and mechanical properties of interlayer toughened composites

    … quality of composite components. Cure path dependency for thermoset composites has received increasing interest from automotive and aerospace researchers as fast cure cycles are required to achieve high-volume and low-cost composites manufacturing. Furthermore, toughened composites are using …

    ubc Repository record for The effect of cure cycle on microstructure and mechanical properties of interlayer toughened composites (opens in a new tab) Download PDF for The effect of cure cycle on microstructure and mechanical properties of interlayer toughened composites (opens in a new tab)

  6. Nonlinear XFEM modeling of delamination in fiber reinforced composites considering uncertain fracture properties and effect of fiber bridging

    … work, a new three-dimensional (3D) stochastic extended finite element method (XFEM) is proposed and implemented to model the delamination surface in composite samples by integrating the capabilities of the finite element method (FEM) commercial software (ABAQUS) into a user-defined FORTRAN code …

    ubc Repository record for Nonlinear XFEM modeling of delamination in fiber reinforced composites considering uncertain fracture properties and effect of fiber bridging (opens in a new tab) Download PDF for Nonlinear XFEM modeling of delamination in fiber reinforced composites considering uncertain fracture properties and effect of fiber bridging (opens in a new tab)

  7. Failure analysis of bonded steel/CFRP laminate connections

    … the effects of the design parameters of adherend thickness, overlap length and fabric orientation on the joint’s failure. There are different ways for such a joint to fail, which makes predicting failure very difficult. Another important difference is the failure mode of composites, where the …

    glasgow Download PDF for Failure analysis of bonded steel/CFRP laminate connections (opens in a new tab)

  8. Theoretical modeling and experimental characterization of stress and crack development in parts manufactured through large area maskless photopolymerization

    … of conversion, was characterized by three-point bending tests. With the degree of conversion, cure-dependent modulus and shrinkage strain as the three primary inputs, finite element modeling was conducted to dynamically simulate the layer-by-layer manufacturing process and to predict the …

    gatech Repository record for Theoretical modeling and experimental characterization of stress and crack development in parts manufactured through large area maskless photopolymerization (opens in a new tab)

  9. Closed/Semi-Closed Form Solutions for Face/Core Debonds in Sandwich Beams

    … in beam theory. In this model, EFA is extended further to better capture the effects of transverse shear. Unlike most models, this approach can be applied for both isotropic and orthotropic face & core materials. The approach uses both normal and rotational springs in the elastic …

    gatech Repository record for Closed/Semi-Closed Form Solutions for Face/Core Debonds in Sandwich Beams (opens in a new tab)

  10. Finite element simulation and reliability assessment of mode-I and mode-II delamination testing of composite laminates

    … of the Double Cantilever Beam (DCB) and the End Notched Flexure (ENF) tests are carried out using the Cohesive Zone Modeling (CZM) approach and the Finite Element Modelling and Analysis using the software ANSYS®. The results obtained are verified using relevant works in the literature. There …

    concordia Download PDF for Finite element simulation and reliability assessment of mode-I and mode-II delamination testing of composite laminates (opens in a new tab)

  11. Correlating Fracture Toughness and Surface Roughness for a Ductile Epoxy Adhered to Aluminum Substrates

    … loadings. The double cantilever beam (DCB), end-notched flexure (ENF), and single leg bend (SLB) tests are used for modes I, II, and I+II (mixed-mode) respectively with four types of surface preparations. Common data reduction methods are used for calculating <em>G<sub>c</sub></em>. …

    ut-knoxville Repository record for Correlating Fracture Toughness and Surface Roughness for a Ductile Epoxy Adhered to Aluminum Substrates (opens in a new tab)

  12. Fracture analysis of layered beams with elastic couplings and hygrothermal stresses: application to metal-to-composite adhesive joints

    … may feature elastic couplings (in particular, bending-extension coupling [BEC]); it may be loaded by arbitrary mechanical loads (i.e., concentrated forces and bending moments); and it may contain residual hygrothermal stresses (RHTS). To tackle this problem, we build a generic analytical model …

    greece Repository record for Fracture analysis of layered beams with elastic couplings and hygrothermal stresses: application to metal-to-composite adhesive joints (opens in a new tab)

  13. Experimental and Numerical Methods for Characterizing the Mixed-Mode Fracture Envelope for a Tough Epoxy

    … high-toughness, epoxy-based adhesive intended for automotive and aerospace applications. As PR-2930 functions as a structural adhesive, quantification of its mechanical properties and limit-states is a necessary task for designing joints bonded with the adhesive. The combination of both …

    vt Repository record for Experimental and Numerical Methods for Characterizing the Mixed-Mode Fracture Envelope for a Tough Epoxy (opens in a new tab)

  14. Weak bond detection in composites using solitary waves

    … First, standard tests such as the three point bending and the end notched flexure tests are conducted to demonstrate that the strength of the bond is reduced due to the presence of the release agent coating. Further, impact test by solitary wave injection is conducted to cause weak bonds to …

    washington Repository record for Weak bond detection in composites using solitary waves (opens in a new tab)

  15. Rate-Dependent Interlaminar Shear Characterization in Solid-State Extruded Ultrahigh Molecular Weight Polyethylene Film Composites

    … ILS Mode II test methods/specimens such as end-notched flexure (ENF) are expected to exhibit unwanted plastic collapse, and ENF testing at high rates is difficult for even favorable materials. To address this issue, a novel experimental method using a pre-cracked lap shear-type composite …

    south-carolina Repository record for Rate-Dependent Interlaminar Shear Characterization in Solid-State Extruded Ultrahigh Molecular Weight Polyethylene Film Composites (opens in a new tab)

  16. Durability of Polyimide Adhesives and Their Bonded Joints for High Temperature Applications

    … study was comprised of Ti-6Al-4V metal adherends and a thermosetting polyimide adhesive, designated as FM-5, supplied by Cytec Engineered Materials, Inc. An approach based on fracture mechanics was employed to assess Ti-6Al-4V/FM-5 bond durability. Initially, wedge tests were utilized to find …

    vt Repository record for Durability of Polyimide Adhesives and Their Bonded Joints for High Temperature Applications (opens in a new tab)

  17. Experimental Investigation of Mode II Fracture and Fatigue in Unidirectional Carbon/Epoxy Composite Beams

    … using a closed-molding process to create End-Notched Flexure (ENF) test specimens of different sizes, using Toray T700G and T800S carbon/epoxy prepregs. An initial pre-crack was induced using a Teflon insert at the midplane of each specimen, with predetermined crack lengths. Each case …

    washington Repository record for Experimental Investigation of Mode II Fracture and Fatigue in Unidirectional Carbon/Epoxy Composite Beams (opens in a new tab)

  18. Delamination Growth in Carbon Fiber Beams: Numerical and Experimental Study Using Computed Tomography

    … laminates, particularly in the context of slender aerospace structures. Composite laminates are advantageous due to their relative low density and superior mechanical properties. A major disadvantage of composite laminates, however, is their predisposition to delamination which decreases …

    washington Repository record for Delamination Growth in Carbon Fiber Beams: Numerical and Experimental Study Using Computed Tomography (opens in a new tab)

  19. Refined theories and Discontinuous Galerkin methods for the analysis of multilayered composite structures

    … geometric non-linearities and the Element Independent Corotational Framework, that is used for geometric non-linear analysis in presence of small strains, is presented. The virtual work statement is then used in chapter 4 where three finite elements are developed in the RZT framework. The first …

    poli-torino Repository record for Refined theories and Discontinuous Galerkin methods for the analysis of multilayered composite structures (opens in a new tab)