Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"End region"”.
-
POST-TENSIONING TO PREVENT END-REGION CRACKS IN PRETENSIONED CONCRETE GIRDERS
… entry point for chlorides and other corrosives, end-region cracks enable degradation of reinforcing steel and further cracking. Current practices offer a variety of methods for controlling end-region cracking. However, methods for preventing--not just controlling or repairing--end-region cracks …
-
Shear stress evaluation and limits for the prestressed concrete girders end region
… models to capture the shear response of end regions of various types of pretensioned concrete girders. The proposed analytical models account for differences in geometry and boundary conditions across girder types. The research comprises experimental testing, finite element analysis, …
-
End-Region Evaluation of Hybrid Ultra-High-Performance Concrete/Conventional Concrete Prestressed Girders
In prestressed concrete girders, the end-regions are often susceptible to high internal forces induced by prestressing, resulting in crack propagation. Resisting these forces necessitates a substantial amount of reinforcing steel, leading to complicated design and congested formwork. Despite this …
-
Development of end-region cracks in pretensioned concrete I-girders employing 0.7-in. diameter strands
… placed on a 2- by 2-in. grid. One such issue is end-region cracking, an occurrence that is common in pretensioned girders, regardless of strand size. These cracks tend to grow in width, length, and number over time due to time-dependent effects such as shrinkage or creep. Additionally, the cracks …
-
End-region behavior of precast, prestressed concrete I-girders employing 0.7-inch diameter prestressing strands
… strands would increase the stresses within the end-region of pretensioned elements, which could lead to undesirable cracking and impact the serviceability of the girders. The work presented in this thesis consists of 1) a comprehensive parametric investigation to evaluate the benefits and …
-
Electromagnetic and mechanical finite element analysis of end region of large-sized three-phase squirrel-cage induction machines
… flux electric machines. It aims at studying the end-region magnetic field under the steady-state operation in order for an analysis of some important electromagnetic and mechanical phenomena that require careful thought during the design of the end region. The research work is focused on the end …
-
Computational modeling of prestress transfer, end-region cracks and shear behavior in prestressed concrete I-girders employing large-diameter strands
… concrete release strength does not increase the end-region cracking that is characteristic of prestressed girders. It must be verified that the development of such cracks does not stimulate anchorage-driven or premature shear failures prior to yielding of the shear reinforcement. Previous …
-
Axial flux distribution in laminated steel cores, with particular reference to the end region magnetic field of large turbo-generators
… to the consideration of leakage fields in the end regions of large rotating electrical machines. In particular the approach is applied to the axial field developed at the ends of stator cores both inside and outside their laminated steel structure. The method considers individually the magnetic …
-
ROEBEL WINDINGS FOR HYDRO GENERATORS
Large-scale generators tend to have high power. Normally, the armature winding of these generators consist of multiple strands insulated separately and transposed (using Roebel transposition) in order to suppress losses caused by eddy currents and circulating currents. As the generator reaches high …
-
Repair of damaged end regions of prestressed concrete girders using fiber reinforced polymer composite materials
… cold climates is the deterioration of the girder ends due to deicing salt exposure, thus reducing their shear strength. This thesis presents the results of the beginning stages of an Illinois Department of Transportation (IDOT) sponsored study to use FRP materials to repair and retrofit the …
-
A Study of Eddy:Current Couplings with and without Endrings
… iron drum and an iron drum fitted with copper endrings as a practical attempt to approximate the idealised condition of endrings of negligible resistance. For (a), the coupling was comprehensively tested with the copper endring drum. Full details of the tests, together with their analysis and …
-
Tensile stresses in the end regions of pretensioned I-beams at release
… Texas at Austin to investigate the cracking in end regions of pretensioned I-beams at prestress transfer. This horizontal cracking near the end face of the girder is caused by the tensile forces that develop perpendicular to the line of action of the prestressing force after it has been applied. …
-
Applied Epidemiology in the Tropical Top End, Northern Australia.
… two public health issues relevant to the Top End region of the NT and the development of the Health Information and Surveillance System (HISS) for the Australian Medical Assistance Team (AUSMAT). The chapters describe the projects I completed as a requirement for this degree, the lessons …
-
Structural performance of Texas U-beams at prestress transfer and under shear-critical loads
… of stresses induced in reinforcing bars in the end region of the beam at prestress transfer, (ii) measure concrete curing temperatures in square and skewed end blocks, (iii) establish the vertical shear capacity of the standard section, (iv) evaluate interaction between behavior at prestress …
-
Seismic Performance of Reinforced Concrete Walls Designed for Ductility
… reinforcement, global buckling of the wall end section, and crushing of concrete at the wall end regions. In response to these observations, several amendments were made to the New Zealand concrete structures standard; however, the performance of RC walls designed to these provisions at …
-
Experimental Performance of Reinforced and Pretensioned Precast Concrete Bent Caps
… connection details to develop serviceable recommendations for precast pretensioned bent cap specifications to be implemented by TxDOT engineers in standard bridges. An alternative connection that does not require the use of grout is investigated at the request of TxDOT engineers. Effective end …
-
Radiation characteristics of selected long wire antennas as a function of geometry using computer modeling techniques
… far field patterns are contained in the appendix. The antenna configurations vary in length from l.87 to 17.19 wavelengths and in their height above ground from 0.103 to 0.610 wavelengths. Variations in the antennas end-regions include: the use of a ground rod or radial screen attached to …
-
Modeling of stress transfer in fiber-reinforced ceramic matrix composites
… with those of FEA quite well except at the fiber end region.</p>
-
Studies on Rous sarcoma virus reverse transcriptase biogenesis
… anti-reverse transcriptase antiserum. The RNA dependent-DNA polymerase activities from E.coli containing the recombinant plasmids were about 30-fold higher than the background activity present in E.coli containing pBR322. The RNA dependent-DNA polymerase activity was specifically neutralized by …
-
Repair of damaged prestressed concrete bridge girders using cementitious materials
… These girders often face damage at the beam-ends caused by corrosion from water and contaminants from the roadways above. In this project, alternative methods for the repair of the beam-end region are studied through small and large-scale laboratory testing, as well as numerical modeling. …
Page 1 of 3