Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"End-winding"”.

  1. Matrix Converter Based Open-end Winding Drives

    … frequency AC' architecture, where the front-end converter may or may not support bidirectional power flow and input power factor control. In these drives, the load-end converter is almost always a two- or multi-level voltage source inverter (VSI). The front-end converter may be another VSI, …

    umn Repository record for Matrix Converter Based Open-end Winding Drives (opens in a new tab)

  2. Modulation and control strategies for multilevel five-phase open-end winding drives

    Industrial and automotive trends clearly demonstrate an increased interest in medium- and high-power variable speed drives. Despite constant progress in the technology, the semiconductor characteristics are still the bottleneck in drive designs, due to their limitations to block high voltage …

    liverpool-jm Repository record for Modulation and control strategies for multilevel five-phase open-end winding drives (opens in a new tab) Download PDF for Modulation and control strategies for multilevel five-phase open-end winding drives (opens in a new tab)

  3. Increasing Electric Machine Power Density With a New End-winding Cooling System

    … are usually used to remove heat coming from the windings and the laminations. However, this limits the maximum power density as the coolant is far away from the slots. Moreover, this radial heat transfer through the lamitations causes the end-windings to be the main hot-spot of the motor. Today, …

    gatech Repository record for Increasing Electric Machine Power Density With a New End-winding Cooling System (opens in a new tab)

  4. Low Voltage Ride-Through for Indirect Matrix Converter Based Open-End Winding Drives

    … recently developed solution is the usage of open-end winding drive modulated using rotating space vectors. Open-end winding machine is constructed by opening the shorted side of an induction machine, which is supplied by another similar converter. Different types of converters including MCs have …

    umn Repository record for Low Voltage Ride-Through for Indirect Matrix Converter Based Open-End Winding Drives (opens in a new tab)

  5. Power Electronic Transformer with Open-End Winding Electric Drive for Wind Energy Conversion Systems

    … ac to dc power conversion, to which an open-end winding dc to ac converter could be connected. Alternatively, it could be configured for direct ac to ac power conversion using dual matrix converters. In the first part of this thesis, the aforementioned push-pull based power electronic topology …

    umn Repository record for Power Electronic Transformer with Open-End Winding Electric Drive for Wind Energy Conversion Systems (opens in a new tab)

  6. An investigation into pulse-width modulated AC electric drives with open-end winding machines

    … fed using a power electronic converter. In open-end winding machines, this star or delta connection is opened and the machine now has six terminals. These six terminals are then fed using two three-phase power converters. There are certain advantages to the open-end winding method, such as …

    umn Repository record for An investigation into pulse-width modulated AC electric drives with open-end winding machines (opens in a new tab)

  7. Fault-Tolerant Strategies for Multiphase Open-End Winding Permanent Magnet Synchronous Machine Drive System

    … failures (open- and short-circuit) and phase winding faults (open- and short-circuit). The thesis primarily addresses challenges associated with the dual inverter fed machine from a common dc-link. This thesis proposes a novel online dc-link capacitor condition monitor algorithm that …

    unsw Repository record for Fault-Tolerant Strategies for Multiphase Open-End Winding Permanent Magnet Synchronous Machine Drive System (opens in a new tab)

  8. Control Strategies for Dual Inverter-fed Open-end Winding PM machines with Nonsinusoidal back EMFs

    … benefits during a fault, PMSM drives with open-ended winding can be employed. Both ends of the windings in the prototype PMSM are connected to a dual inverter arrangement of two 2-level inverters both connected to one dc source. However, considering the zero sequence voltage is clamped to zero …

    unsw Repository record for Control Strategies for Dual Inverter-fed Open-end Winding PM machines with Nonsinusoidal back EMFs (opens in a new tab)

  9. A Space Vector Modulation Scheme for Reduction of Dead-Time Effects on Common Mode Voltage of an Open End Winding Induction Machine

    … with dual 2-level inverters supplying an Open End Winding Machine (OEWM) was studied. This thesis investigates the Space Vector Modulation (SVM) switching strategy for an open end winding machine, fed by dual 2-level inverters. One DC voltage source is employed to feed the both inverters. In …

    concordia Download PDF for A Space Vector Modulation Scheme for Reduction of Dead-Time Effects on Common Mode Voltage of an Open End Winding Induction Machine (opens in a new tab)

  10. Electromagnetic and mechanical finite element analysis of end region of large-sized three-phase squirrel-cage induction machines

    … flux electric machines. It aims at studying the end-region magnetic field under the steady-state operation in order for an analysis of some important electromagnetic and mechanical phenomena that require careful thought during the design of the end region. The research work is focused on the end …

    aalto Repository record for Electromagnetic and mechanical finite element analysis of end region of large-sized three-phase squirrel-cage induction machines (opens in a new tab)

  11. Multiscale analysis and validation of a novel in-slot heat exchanger for motor thermal management

    … work on motor cooling has identified the copper windings in the stator and the end-windings outside the stator slot, as the major source of heat dissipation in motors. Slot winding and end-winding cooling methods that minimize thermal resistance between the heat sources and heat-removing coolant …

    gatech Repository record for Multiscale analysis and validation of a novel in-slot heat exchanger for motor thermal management (opens in a new tab)

  12. Developing fault-tolerant control strategies for a five-phase permanent-magnet machine drive system

    … occurs. Some of these drive systems use the open-end winding inverter topology as it allows for the injection of unbalanced phase currents, i.e. currents that do not sum to zero. This allows for better optimization of the machine torque after open-phase faults occur. The post-fault phase currents …

    unsw Repository record for Developing fault-tolerant control strategies for a five-phase permanent-magnet machine drive system (opens in a new tab)

  13. Common-mode Noise Reduction in Wide Band Gap Device Based Motor Drives

    Wide band gap (WBG) devices are the latest trend in the power electronics industry. MOSFETs built using WBG materials offer numerous benefits to power electronic circuits. The benefit of using WBG MOSFETs over conventional Si IGBTs is the ability to operate at higher switching frequencies and lower …

    umn Repository record for Common-mode Noise Reduction in Wide Band Gap Device Based Motor Drives (opens in a new tab)

  14. Electromagnetic performance of flux-switching permanent magnet brushless machines

    … for the influence of size (scaling) and 3-D end-effects. An analytical approach to predicting the performance of flux-switching PM machines is developed based on a non-linear adaptive lumped parameter magnetic circuit model, in order to enable the electromagnetic performance, e.g. airgap …

    whiterose Download PDF for Electromagnetic performance of flux-switching permanent magnet brushless machines (opens in a new tab)

  15. Thermal and Mechanical Design and Manufacturing of Electrically Excited Synchronous Machine for High-Speed applications

    … including the cooling of the rotor and end windings, as well as ensuring the mechanical integrity of joints under substantial centrifugal forces. This study aims to thoroughly investigate various losses inherent in EESMs, namely copper losses, iron losses, and mechanical losses, …

    chalmers Repository record for Thermal and Mechanical Design and Manufacturing of Electrically Excited Synchronous Machine for High-Speed applications (opens in a new tab)

  16. A Finite-Element Method for the Solution of Turbine-Generation End-Zone Fields

    … the introduction of direct cooling of the windings, which has allowed the electric loading to be greatly increased. The end-region flux densities have increased in consequence, and core end-heating and end-winding forces are major factors to be considered in the design. It is thus essential …

    aston Download PDF for A Finite-Element Method for the Solution of Turbine-Generation End-Zone Fields (opens in a new tab)

  17. OPTIMAL PULSE WIDTH MODULATION OF MULTILEVEL INVERTERS FOR MEDIUM VOLTAGE DRIVES

    … for the dual inverter based MLI fed open-end winding induction motor drives. An enhanced SOP technique has been proposed to eliminate the common-mode currents in the open-end stator windings of induction motor drives. Also, the thesis has proposed new dual inverter MLI topology based on …

    nus Repository record for OPTIMAL PULSE WIDTH MODULATION OF MULTILEVEL INVERTERS FOR MEDIUM VOLTAGE DRIVES (opens in a new tab) Download file for OPTIMAL PULSE WIDTH MODULATION OF MULTILEVEL INVERTERS FOR MEDIUM VOLTAGE DRIVES (opens in a new tab)

  18. Design and development of exclusive modulation techniques for effective power regulation in dual two-level-inverter-fed open-ended winding traction motors

    … using Matlab/Simulink and PLECS. A 5.7 kW open-end winding induction motor was used as the load for experimental studies. The dual inverter system was build using two Semikron’s stacks having half-bridge modules of SKM50GB12T4. For the speed control and PWM, a digital signal processor …

    uoit Repository record for Design and development of exclusive modulation techniques for effective power regulation in dual two-level-inverter-fed open-ended winding traction motors (opens in a new tab)

  19. EXTERNAL-ROTOR 6/10 SWITCHED RELUCTANCE MOTOR FOR AN ELECTRIC BICYCLE

    … cost-effective, healthy, and environmentally friendly personal mode of transportation, electric bicycles (E-bikes) are gaining an increasing market share from conventional bicycles and automobiles. Considering the legal rules in Ontario, Canada, a 500W motor makes the E-bike more attractive for …

    mcmaster Repository record for EXTERNAL-ROTOR 6/10 SWITCHED RELUCTANCE MOTOR FOR AN ELECTRIC BICYCLE (opens in a new tab)

  20. Investigation of Stator Mounted Permanent Magnet Machines

    … as the machine diameter increases, with a tendency for the optimal split ratio to increase in larger machines as magnetic saturation in the stator core tends to limit the benefits of increasing stator mmf. The various studies show that from a torque density perspective, FSPM have a lower …

    whiterose Download file for Investigation of Stator Mounted Permanent Magnet Machines (opens in a new tab)

Page 1 of 2