Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 45 for “"Energy-per-bit"”.

  1. Design and Demonstration of 3D Glass Panel Embedded (GPE) Package for Superior Bandwidth and Power-Efficiency

    … to meet the growing demands in compute performance and memory capacity. Hence, the bandwidth and power-efficiency (measured as energy-per-bit) of communication between these smaller chips become the limiting factor in scaling system performance. These two key metrics are primarily driven …

    gatech Repository record for Design and Demonstration of 3D Glass Panel Embedded (GPE) Package for Superior Bandwidth and Power-Efficiency (opens in a new tab)

  2. Energy efficient transmission in wireless communication networks

    In this dissertation, we study energy efficient transmission in wireless communication networks. The general problem of energy efficient transmission over wireless networks is formulated into optimization problems for the following distinct (but inter-related) settings: Problem Setting 1: The …

    texas Repository record for Energy efficient transmission in wireless communication networks (opens in a new tab)

  3. Modeling and simulation of the physical layer of the single channel ground and airborne radio system (SINCGARS)

    … was analyzed in order to gain insight into the bit-error-rate (BER) performance in various channel conditions. The BER performance of the radio was examined using theoretical, simulation, and experimental techniques. These results are presented in graphical form as the probability of bit error …

    nps Repository record for Modeling and simulation of the physical layer of the single channel ground and airborne radio system (SINCGARS) (opens in a new tab)

  4. Intelligent real-time environment and process adaptive radio frequency front-ends for ultra low power applications

    … adaptive systems can have multiple modes of operation depending upon the throughput requirements of the system. Two such modes were demonstrated: one optimizing the energy-per-bit (energy priority mode) and another achieving the lowest power consumption at the highest throughput (data priority …

    gatech Repository record for Intelligent real-time environment and process adaptive radio frequency front-ends for ultra low power applications (opens in a new tab)

  5. Achieving hundreds-meter ranges in low powered RFID systems with quantum tunneling tags

    … the high power costs of communication per distance unit lead to poor technical solutions, particularly in terms of flexibility and efficiency. A future of devices connected through an Internet of Things (IoT) network will require billions of sensors that will affect costs and increase …

    gatech Repository record for Achieving hundreds-meter ranges in low powered RFID systems with quantum tunneling tags (opens in a new tab)

  6. Simulation of Mobile Hydroacoustic Communications in Underwater Acoustic Sensor Networks

    … Three major metrics are calculated in this work: Bit Error Rate (BER), distance, and signal energy per bit over noise power spectral density (Eb/N0). Finally, the performance of communicating sensors moving according to the MCM model is evaluated. The simulation results illustrate that the BER for …

    carleton Repository record for Simulation of Mobile Hydroacoustic Communications in Underwater Acoustic Sensor Networks (opens in a new tab)

  7. Simulation and Modeling of Underwater Acoustic Communication Channels With Wide Band Attenuation and Ambient Noise

    … also coherent attenuation are implemented. The bit error rate versus energy per bit to noise power spectral density ratio (Eb/N0) is applied for evaluation. The main conclusion of this work is that the coherent models with colored noise in frequency domain are more similar to the situation of …

    carleton Repository record for Simulation and Modeling of Underwater Acoustic Communication Channels With Wide Band Attenuation and Ambient Noise (opens in a new tab)

  8. Modulated Backscatter for Low-Power High-Bandwidth Communication

    … of a communication link in order to increase the energy efficiency of a remote device or sensor. Backscatter modulation allows a remote device to wirelessly telemeter information without operating a traditional transceiver. Instead, a backscatter device leverages a carrier transmitted by an access …

    duke Repository record for Modulated Backscatter for Low-Power High-Bandwidth Communication (opens in a new tab)

  9. FORWARD ERROR CORRECTION ENCODING ON THE MULTIPLE INPUT/MULTIPLE OUTPUT FREE SPACE OPTICAL COMMUNICATIONS CHANNEL

    … Codes are compared by characteristics such as energy per bit and outage thresholds to determine which characteristics of the different codes most critically affect performance. Key performance indicators for each code include average bit error rate, overall throughput, and variability. A …

    nps Repository record for FORWARD ERROR CORRECTION ENCODING ON THE MULTIPLE INPUT/MULTIPLE OUTPUT FREE SPACE OPTICAL COMMUNICATIONS CHANNEL (opens in a new tab)

  10. Modeling W/V-band Satellite Communications in the Presence of Noise Jamming

    Understanding the performance of wideband modulated signals under noise jamming conditions is important for advancing W/V-band military satellite communications. This research developed and validated models to predict performance degradation of a communication channel in the presence of wideband …

    unm Repository record for Modeling W/V-band Satellite Communications in the Presence of Noise Jamming (opens in a new tab)

  11. Outlooks on Radio Transmitter Energy Efficiency and Ultra-Low Power Radio Transmitters

    … The wireless devices are powered by limited energy sources and require energy-efficient electronic circuitry to maximize the operating time. Radios can consume a significant share of the power budget of a wireless device. Researchers and designers have, therefore, innovated numerous ultralow …

    aalto Repository record for Outlooks on Radio Transmitter Energy Efficiency and Ultra-Low Power Radio Transmitters (opens in a new tab)

  12. A Variable Bandwidth, Power-Scalable Optical Receiver Front-End

    … Normally, high-speed interconnects in a super computer are implemented using a short distance electrical medium such as a printed circuit board or coaxial cable. However, data transmission through an electrical medium suffers severe bandwidth limitation due to its distributed resistance, …

    concordia Download PDF for A Variable Bandwidth, Power-Scalable Optical Receiver Front-End (opens in a new tab)

  13. Frequency reuse through RF power management in ship-to-ship data networks

    … co- channel interference which degrades system performance. A computer simulation was developed to determine the bit error rate (BER) of a QPSK system in a Ricean fading channel with one co-channel interferer. The simulation generates plots of energy per bit to one sided noise power spectral …

    nps Repository record for Frequency reuse through RF power management in ship-to-ship data networks (opens in a new tab)

  14. Thermal and power delivery network modeling for emerging microelectronic integration platforms

    … of 2.5-D integration, thermal exploration is performed for three approaches of 2.5-D integration. Moreover, the impact of several different technology parameters is studied, such as die thickness mismatch and die spacing. Next, power supply challenges are investigated focusing on bridge-chip …

    gatech Repository record for Thermal and power delivery network modeling for emerging microelectronic integration platforms (opens in a new tab)

  15. Radiated power control for narrow-band digital links

    … the receiver. In this thesis, we present the experimental results that relate the dependency of the logarithm of bit error rate (BER) versus the logarithm of the ratio of the energy per bit to the one sided noise power spectral density (E(sub b)/N). The dependency of BER to E(sub b)/N(sub 0) in …

    nps Repository record for Radiated power control for narrow-band digital links (opens in a new tab)

  16. Adaptive Coverage for Future LTE Networks

    … start by introducing a new metric, called Total Energy Per Bit (TEPB), to be used as a measure for greening of the network. Then, a proposed vision of replacing Macro-eNBs with a large number of Pico-eNBs to bring the network closer to the users is provided. This naturally leads to casting the …

    carleton Repository record for Adaptive Coverage for Future LTE Networks (opens in a new tab)

  17. Microwave characterization of vertical cavity surface emitting diode laser and transistor laser

    … the bandwidth and data transmission performance of diode lasers, such as VCSELs, are fundamentally limited by the slow spontaneous recombination lifetime. Therefore, a new kind of semiconductor laser, the transistor laser (TL), is proposed to break the bandwidth bottleneck as the …

    uiuc Repository record for Microwave characterization of vertical cavity surface emitting diode laser and transistor laser (opens in a new tab)

  18. Capacity -based parameter optimization of bandwidth constrained CPM

    … detected. Furthermore, the constant envelope property of CPM permits highly power efficient amplification. The design of bit-interleaved coded continuous phase modulation is characterized by the code rate, modulation order, modulation index, and pulse shape. This dissertation outlines a …

    wvu Repository record for Capacity -based parameter optimization of bandwidth constrained CPM (opens in a new tab)

  19. Energy-Efficient 434 MHz Wakeup Receivers Based on a Switched Passive Input Network With Surface Acoustic Wave Resonator

    Wakeup receivers (WuRxs) are a key enabler for energy efficient wireless communication and sensor networks. They are intended to receive a wakeup sequence (WUS) to wake up a wireless node subsequently. This class of wireless receivers (Rxs) need to exhibit a sufficient input sensitivity and input …

    qucosa-diss

  20. Global Routing Protocols for Wireless Body Area Networks

    … with a wireless body area network with battery operated nodes. Global routing protocols are considered. The Dijkstra`s algorithm was modified using a novel link cost function in order to perform energy balancing across the network. The proposed protocol makes optimal use of the network energy and …

    rit Repository record for Global Routing Protocols for Wireless Body Area Networks (opens in a new tab)

Page 1 of 3