Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"Engine Control System"”.

  1. Prototype engine control system development

    ABSTRACTPROTOTYPE ENGINE CONTROL SYSTEM DEVELOPMENTIn order to improve the fuel economy and reduce exhaust emissions for automotive engines, many novel technologies need to be validated during engine dynamometer tests. This study focuses on developing a MotoTron based prototype engine control …

    msu Repository record for Prototype engine control system development (opens in a new tab)

  2. Wave-disk engine control, system design and implementation

    The wave disk engine is a type of internal combustion gas turbine engine invented by Dr. Norbert Mueller, and Dr. Janusz Piechna and patented in 2009. Unlike a typical automobile engine which operates as an Otto cycle engine, the wave disk engine operates under the Atkinson cycle. This can lead to …

    msu Repository record for Wave-disk engine control, system design and implementation (opens in a new tab)

  3. Setting suitable requirements for a 1-cylinder research engine control system

    The combustion in modern engines are controlled by electronic systems, with the electronic control unit, ECU, as the main component to control and give commands to the system. The ECU is divided into hardware and software. Being independent of complex, licensed and commercial software and hardware …

    chalmers Repository record for Setting suitable requirements for a 1-cylinder research engine control system (opens in a new tab)

  4. A STUDY OF MODEL-BASED CONTROL STRATEGY FOR A GASOLINE TURBOCHARGED DIRECT INJECTION SPARK IGNITED ENGINE

    … have been added to spark-ignition (SI) engines, thus exponentially increase the complexity and calibration work of traditional map-based engine control. To achieve better engine performance without introducing significant calibration efforts and make the developed control system easily …

    mtu Repository record for A STUDY OF MODEL-BASED CONTROL STRATEGY FOR A GASOLINE TURBOCHARGED DIRECT INJECTION SPARK IGNITED ENGINE (opens in a new tab)

  5. Optimizing diesel engine efficiency using the controllability of a variable ratio hydrostatic transmission

    "A linear mathematical model of a diesel engine, hydrostatic transmission, and electric dynamometer system was developed. This model was used as an aid in designing a single input controller which regulates engine speed to optimize efficiency while maintaining constant transmission output speed …

    must-thes Repository record for Optimizing diesel engine efficiency using the controllability of a variable ratio hydrostatic transmission (opens in a new tab)

  6. Theory and control of an internal combustion engine utilizing fuel blending in a hybrid electric vehicle

    … design competition designed to train future engineers to solve these complex problems. A Chevrolet Equinox has been converted into a parallel hybrid electric vehicle as Texas Tech University’s entry into the ChallengeX competition. The objective was to maintain stock vehicle performance while …

    ttu Repository record for Theory and control of an internal combustion engine utilizing fuel blending in a hybrid electric vehicle (opens in a new tab)

  7. Diesel engine out exhaust temperature modelling- moving from a map based to physically based model approach

    Engine out exhaust gas is an input to the engine system components downstream, which are directly or indirectly responsible for air charge control, emission regulation, torque control or are used as feedback to the engine control system. This makes the accurate prediction of the exhaust gas an …

    chalmers Repository record for Diesel engine out exhaust temperature modelling- moving from a map based to physically based model approach (opens in a new tab)

  8. Nuclear Thermal Rocket Engine Control Autonomy Via Embedded Decision

    … means for developing nuclear reactor autonomous control. Nuclear thermal propulsion (NTP) is identified as a high priority technology for development, and is the focus of this research. First, a background investigation is presented on the state of the art in nuclear thermal rocket (NTR) engine …

    utk-theses Repository record for Nuclear Thermal Rocket Engine Control Autonomy Via Embedded Decision (opens in a new tab)

  9. Experimental measurement and analysis of in-cylinder fuel-air mixing and combustion using an optical DI Diesel engine under realistic operating conditions

    In order to improve engine-out emissions and performance of Diesel combustion systems, continued insight into the complex combustion and fuel spray processes must be gained. An optically accessible Diesel engine and modern diagnostic imaging methods can contribute to the understanding of the fuel …

    msu Repository record for Experimental measurement and analysis of in-cylinder fuel-air mixing and combustion using an optical DI Diesel engine under realistic operating conditions (opens in a new tab)

  10. Development of a high efficiency dilute gasoline engine

    Development of a High Efficiency Dilute Gasoline Engine (HEDGE) and control system for use in the Challenge X design competition encompasses the body of this work. The HEDGE concept embodies running an engine on gasoline at Diesel-like compression ratios. This is accomplished through extreme …

    texas Repository record for Development of a high efficiency dilute gasoline engine (opens in a new tab) Restricted access

  11. Applications of field programmable gate arrays for engine control

    Automotive engine control is becoming increasingly complex due to the drivers of emissions, fuel economy, and fault detection. Research in to new engine concepts is often limited by the ability to control combustion. Traditional engine-targeted micro controllers have proven difficult for the …

    colostate Repository record for Applications of field programmable gate arrays for engine control (opens in a new tab)

  12. Face Lift of a Control System for Natural Gas Engines; Redesign of a Cylinder Module (CM) and a Knock Module (KM) in a system for control of natural gas engines

    … project is to guarantee spare parts of an EMS (Engine Management System for Natural Gas) electronic engine control system for natural gas engines for as long as they may be needed. This is done by redesigning the old system using state of the art components. The redesign will also improve the …

    chalmers Repository record for Face Lift of a Control System for Natural Gas Engines; Redesign of a Cylinder Module (CM) and a Knock Module (KM) in a system for control of natural gas engines (opens in a new tab)

  13. Hardware and Software Design for a Large Gas Engine Detonation Simulator

    … levels, provide fuel economy, and improve engine quality have been the major driving forces for engine control advancement [1]. Benefits of engine control advancement include improved energy efficiency, reduced greenhouse effects and noxious gas emissions, oil change frequencies, and …

    boise Repository record for Hardware and Software Design for a Large Gas Engine Detonation Simulator (opens in a new tab)

  14. Automated analysis of security protocol implementations

    … such critical tasks, means it is essential to engineer them with great care, just like we do with bridges or a safety-critical aircraft engine control system, for example. As with all types of engineering, there are two key elements to this process – design and implementation. In this thesis we …

    birmingham Download PDF for Automated analysis of security protocol implementations (opens in a new tab)

  15. Simple strategy-based technique to reduce emissions from SCR-equipped heavy-duty diesel engine over different engine-out calibrations

    Heavy-duty diesel engine manufacturers, regulators and operators in Europe and US have judged the Selective Catalytic Reduction (SCR) system to be the most suitable exhaust aftertreatment technology to meet the Euro V and US 2010 emission standards for oxides of nitrogen (NOx). The choice of the …

    wvu Repository record for Simple strategy-based technique to reduce emissions from SCR-equipped heavy-duty diesel engine over different engine-out calibrations (opens in a new tab)

  16. A Study of Micromachined Sensor Arrays for Automotive Emissions

    … exhaust would allow significant improvement of engine control system abilities. Existing sensors cannot handle high exhaust temperatures and are expensive. Therefore, there is a need for small, low cost sensors with low power consumption that can measure CO, NO2, and H2O. Microelectromechanical …

    sdstate Repository record for A Study of Micromachined Sensor Arrays for Automotive Emissions (opens in a new tab)

  17. Diluted Operation of a Heavy-Duty Natural Gas Engine - Aiming at Improved Effciency, Emission and Maximum Load

    Most heavy-duty engines are diesel operated. Severe emission regulations, high fuel prices, high technology costs (e.g. catalysts, fuel injection systems) and unsustainably in supplying fuel are enough reasons to convenience engine developers to explore alternative technologies or fuels. Using …

    lund Repository record for Diluted Operation of a Heavy-Duty Natural Gas Engine - Aiming at Improved Effciency, Emission and Maximum Load (opens in a new tab) Download PDF for Diluted Operation of a Heavy-Duty Natural Gas Engine - Aiming at Improved Effciency, Emission and Maximum Load (opens in a new tab)

  18. The role of information flow in engineering optimization

    … of the overall performance of a biological, engineering, or human system. One example is a modern automobile. Multiple systems (such as the power train and electronic engine control system) are designed and built from various assemblies and components, all of which are then integrated into …

    iastate Repository record for The role of information flow in engineering optimization (opens in a new tab)

  19. Model-Based Control of Gasoline Partially Premixed Combustion

    … Combustion (PPC) is an internal combustion engine concept that aims to yield low NOx and soot emission levels together with high engine efficiency. PPC belongs to the class of low temperature combustion concepts where the ignition delay is prolonged in order to promote the air-fuel-mixture …

    lund Repository record for Model-Based Control of Gasoline Partially Premixed Combustion (opens in a new tab) Download PDF for Model-Based Control of Gasoline Partially Premixed Combustion (opens in a new tab)

Page 1 of 2