Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 41 for “"Engine Modeling"”.

  1. The influence of certain submodels on diesel engine modeling results

    … of the application of CFD to the study of diesel engines. In this work, certain submodels used in diesel engine modeling have been compared and analyzed. The submodels studied are related to the modeling of turbulence, drop breakup, ignition, chemistry, combustion, and emissions. Most of the …

    aalto Repository record for The influence of certain submodels on diesel engine modeling results (opens in a new tab)

  2. Autoignition modeling of natural gas for engine modeling programs: an experimental and modeling study

    … of Environmental Protection Agency has forced engine manufacturers to develop alternative combustion systems and clean alternative fuels. Lean-burn natural gas engines are attracting increasing attention as a desirable alternative, especially for stationary applications. In-cylinder pollution …

    iastate Repository record for Autoignition modeling of natural gas for engine modeling programs: an experimental and modeling study (opens in a new tab)

  3. Development of a Mixing-Controlled Combustion Model for 0D Engine Modeling: Using High-Order Models to Guide the Formulation of Reduced-Order Models

    … different purposes or use cases. All levels of modeling for virtual prototyping, however, require a level of validation and predictive ability to be useful. To this end, the following thesis presents several models for the analysis and performance prediction of diesel engines. A thermodynamic …

    clemson Repository record for Development of a Mixing-Controlled Combustion Model for 0D Engine Modeling: Using High-Order Models to Guide the Formulation of Reduced-Order Models (opens in a new tab)

  4. An analysis of three model-based estimation methods for diesel engine condition monitoring

    In the context of engine fault detection and isolation, we focus on three main aspects: engine modeling and validation, engine parameter identification, and cylinder pressure waveform reconstruction. The problem of diesel engine modeling is solved using Euler's equation, under the assumption that …

    ubc Repository record for An analysis of three model-based estimation methods for diesel engine condition monitoring (opens in a new tab) Download PDF for An analysis of three model-based estimation methods for diesel engine condition monitoring (opens in a new tab)

  5. Nuclear Thermal Rocket Engine Control Autonomy Via Embedded Decision

    … state of the art in nuclear thermal rocket (NTR) engine control and modeling practices, resulting in the development of a low order NTR engine dynamic model based on the literature. The engine model was used to perform the following investigation, and is intended to serve as a research platform …

    utk-theses Repository record for Nuclear Thermal Rocket Engine Control Autonomy Via Embedded Decision (opens in a new tab)

  6. Effects of artificial neural networks characterization on prediction of diesel engine emissions

    … more accurately for inventory purposes. Engine modeling, and real time control are the most indispensable steps towards lowering engine emissions, and it is argued that this modeling can be achieved by implementation of Artificial Neural Networks (ANN). Effects of ANN design, …

    wvu Repository record for Effects of artificial neural networks characterization on prediction of diesel engine emissions (opens in a new tab)

  7. Characterization and Modeling of Rubbing Friction in a Motored Four-Cylinder Internal Combustion Engine

    <p>While many aspects of the internal combustion engine contribute to its fuel efficiency, internal friction warrants special attention due to the relatively large degree of losses it represents, as well as a nearly universal application to all engines. Internal friction is therefore an important …

    mcmaster Repository record for Characterization and Modeling of Rubbing Friction in a Motored Four-Cylinder Internal Combustion Engine (opens in a new tab)

  8. The Investigation of the Reaction of 2,3-Dimethylfuran With O(³P) and the Estimate of the Photoionization Cross Section of C-Cl and Absolute Photoionization Cross Sections of Chlorinated Organic Compounds

    … biofuel with a common oxidant in a combustion engine is useful for engine modeling and fuel integration. Having an estimation of the carbon-chlorine photoionization cross section is essential for quantifying carcinogenic chlorinated compounds using mass spectrometry. Chapter 2 provides a …

    usfca Repository record for The Investigation of the Reaction of 2,3-Dimethylfuran With O(³P) and the Estimate of the Photoionization Cross Section of C-Cl and Absolute Photoionization Cross Sections of Chlorinated Organic Compounds (opens in a new tab)

  9. INTEGRATION OF GT-POWER ENGINE MODEL WITH DSPACE VEHICLE MODEL FOR CO-SIMULATION AND VALIDATION

    Mean value engine modeling (MVEM) is vital for control design to test advanced internal combustion engines. dSPACE ASM (Automotive Simulation Models) Gasoline Engine model implements the same approach for engine simulation using maps for performance estimation. Although the mean value engine models …

    mtu Repository record for INTEGRATION OF GT-POWER ENGINE MODEL WITH DSPACE VEHICLE MODEL FOR CO-SIMULATION AND VALIDATION (opens in a new tab)

  10. Ammonia for Aviation

    … baseline data based loosely on the CFM Leap-1B engine. Modeling was then performed using ammonia, hydrogen, and percentages of cracked ammonia to compare to Jet A. Results show a drop in SFC and a gain in efficiency of 64.72% and 3.68% for hydrogen, respectively, and an increase of 121.7% and …

    ucf Repository record for Ammonia for Aviation (opens in a new tab)

  11. Extinction droplet sizing measurements in diesel relevant sprays

    … diagnostic will be especially valuable to the engine modeling community for the quantitative validation of spray submodels in engine CFD codes. The methodology for quantification of SMD distributions using the SAMR technique has been previously introduced. This thesis aims to extend the initial …

    gatech Repository record for Extinction droplet sizing measurements in diesel relevant sprays (opens in a new tab)

  12. Investigation of the Effects of Inlet Swirl on Compressor Performance and Operability Using a Modified Parallel Compressor Model

    … swirl) and total pressure distortion at the engine face. The impact of inlet swirl on the engine performance and operability must be quantified to ensure safe operation of the aircraft and propulsion system and to define installed deficiencies. Testing is performed over a wide range of flight …

    ut-knoxville Repository record for Investigation of the Effects of Inlet Swirl on Compressor Performance and Operability Using a Modified Parallel Compressor Model (opens in a new tab)

  13. Experimental and Theoretical Investigations of Lube Oil Performance and Engine Friction

    … small, single-cylinder 517 cc Hatz 1D50 diesel engine to evaluate lube oil performance and engine friction at conditions typical for a fired engine is investigated in the present study. In addition a commercial engine modeling software, AVL Excite Power Unit, is used to predict the effects of …

    utk-theses Repository record for Experimental and Theoretical Investigations of Lube Oil Performance and Engine Friction (opens in a new tab)

  14. Machine learning modeling of a direct-injected dual-fuel engine based on low density experimental data

    … increasing in complexity, requiring advanced modeling methods with large data sets to analyze these systems. This work proposes a machine learning approach to rapidly developing, steady state, control oriented, engine models that use optimization methods and engineering knowledge to reduce the …

    ubc Repository record for Machine learning modeling of a direct-injected dual-fuel engine based on low density experimental data (opens in a new tab) Download PDF for Machine learning modeling of a direct-injected dual-fuel engine based on low density experimental data (opens in a new tab)

  15. Physics-Based Diesel Engine Model Development, Calibration and Validation for Accurate Cylinder Parameters and Nox Prediction

    … regulatory requirements and modern diesel engine technologies have engaged automotive manufacturers and researchers in accurately predicting and controlling diesel engine-out emissions. As a result, engine control systems have become more complex and opaquer, increasing the development time …

    iupui Repository record for Physics-Based Diesel Engine Model Development, Calibration and Validation for Accurate Cylinder Parameters and Nox Prediction (opens in a new tab)

  16. Pre-integrated non-equilibrium combustion-response mapping for internal combustion engine emissions

    … to predict emissions in internal combustion (IC) engines. The method couples a multi-dimensional engine modeling program with pre-integrated non-equilibrium chemical kinetic reaction results. Prior to engine simulation, detailed chemical kinetic reactions of air/fuel mixtures at different …

    glasgow Download PDF for Pre-integrated non-equilibrium combustion-response mapping for internal combustion engine emissions (opens in a new tab)

  17. Dual-fuel combustion of hydrocarbon fuel droplets in lean, premixed methane/oxidizer mixtures in a rapid compression machine

    … and pollutant formation in internal combustion engines. Due to recent decreases in the price of natural gas, the incentive has grown to operate engines in dual-fuel mode, where some amount of diesel is substituted with natural gas. Since natural gas is expected to remain less expensive on a …

    colostate Repository record for Dual-fuel combustion of hydrocarbon fuel droplets in lean, premixed methane/oxidizer mixtures in a rapid compression machine (opens in a new tab)

  18. A reduced chemical kinetic mechanism for computational fluid dynamics simulations of high brake mean effective pressure, lean-burn natural gas engines

    … brake mean effective pressure (BMEP) natural gas engines that achieve high fuel efficiency and low emissions. Specifically, these CFD simulations can provide the analytical tools required to design highly optimized natural gas engine components such as pistons, intake ports, pre-combustion …

    colostate Repository record for A reduced chemical kinetic mechanism for computational fluid dynamics simulations of high brake mean effective pressure, lean-burn natural gas engines (opens in a new tab)

Page 1 of 3