Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 842 for “"Engineering, Metallurgy"”.

  1. An analysis of the grain refinement of magnesium by zirconium

    A Design of Experiments (DOE) approach was used to conduct a systematic study of the grain refinement of magnesium by zirconium; variables included the amount of zirconium, the pouring temperature, and the settling time prior to casting. Samples were poured into a special "hockey puck" mold …

    alabama Repository record for An analysis of the grain refinement of magnesium by zirconium (opens in a new tab)

  2. Investigation of the effect of hafnium and chromium additions on the microstructures and short-term oxidation properties of DC magnetron sputtered β-nial bond coats deposited on Ni-based superalloys

    Thermal barrier coatings play a major role in protecting turbine blades from extreme operating environments and extending service lifetimes. Reactive elements (e.g. Zr, Hf, Y, Si, etc.) have been shown to enhance the oxidation performance of such coating systems when added in appropriate amounts to …

    alabama Repository record for Investigation of the effect of hafnium and chromium additions on the microstructures and short-term oxidation properties of DC magnetron sputtered β-nial bond coats deposited on Ni-based superalloys (opens in a new tab)

  3. The effect of copper on the eutectoid transformation in ductile iron

    As a result of the shortage in the availability of suitable steel scrap, trace elements are unintentionally added to ductile iron from the scrap available for melting. The effect of some of these trace elements on graphite shape, the resulting microstructure, and the dimensional behavior of the …

    alabama Repository record for The effect of copper on the eutectoid transformation in ductile iron (opens in a new tab)

  4. Continuous reduction of nickel and cobalt from ammoniacal sulfate solutions by hydrogen in a tubular reactor /

    Ammoniacal nickel sulfate solution treated with ferrous sulfate (nucleating agent) was contacted with hydrogen in a continuous countercurrent tubular reactor. Bottom products (liquid-solid) and overflow products (gas-liquid) were separated in individual high pressure separators. Nickel conversion, …

    oklahoma-thes Repository record for Continuous reduction of nickel and cobalt from ammoniacal sulfate solutions by hydrogen in a tubular reactor / (opens in a new tab)

  5. Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing

    NiTi and NiTi-based Shape Memory Alloys (SMA) exhibit a reversible solid-state phase transformation from martensite to austenite driven by thermal energy. High temperature (Mf>100 degrees C) SMAs are martensite at room temperature and can be fabricated into solid-state actuators that return to a …

    tamu Repository record for Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing (opens in a new tab) Embargoed until 2027-08-01

  6. Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing

    NiTi and NiTi-based Shape Memory Alloys (SMA) exhibit a reversible solid-state phase transformation from martensite to austenite driven by thermal energy. High temperature (Mf>100 degrees C) SMAs are martensite at room temperature and can be fabricated into solid-state actuators that return to a …

    tamu Repository record for Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing (opens in a new tab) Embargoed until 2027-08-01

  7. Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing

    NiTi and NiTi-based Shape Memory Alloys (SMA) exhibit a reversible solid-state phase transformation from martensite to austenite driven by thermal energy. High temperature (Mf>100 degrees C) SMAs are martensite at room temperature and can be fabricated into solid-state actuators that return to a …

    tamu Repository record for Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing (opens in a new tab) Embargoed until 2027-08-01

  8. Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing

    NiTi and NiTi-based Shape Memory Alloys (SMA) exhibit a reversible solid-state phase transformation from martensite to austenite driven by thermal energy. High temperature (Mf>100 degrees C) SMAs are martensite at room temperature and can be fabricated into solid-state actuators that return to a …

    tamu Repository record for Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing (opens in a new tab) Embargoed until 2027-08-01

  9. Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing

    NiTi and NiTi-based Shape Memory Alloys (SMA) exhibit a reversible solid-state phase transformation from martensite to austenite driven by thermal energy. High temperature (Mf>100 degrees C) SMAs are martensite at room temperature and can be fabricated into solid-state actuators that return to a …

    tamu Repository record for Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing (opens in a new tab) Embargoed until 2027-08-01

  10. Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing

    NiTi and NiTi-based Shape Memory Alloys (SMA) exhibit a reversible solid-state phase transformation from martensite to austenite driven by thermal energy. High temperature (Mf>100 degrees C) SMAs are martensite at room temperature and can be fabricated into solid-state actuators that return to a …

    tamu Repository record for Development of Inexpensive High Temperature NiTi-Based Shape Memory Alloys for Powder Bed Additive Manufacturing (opens in a new tab) Embargoed until 2027-08-01

  11. The Effect of Stress State and Precipitation on Stress-Induced Martensitic Transformations in Polycrystalline and Single Crystal Shape Memory Alloys: Experiments and Micro-Mechanical Modeling

    To properly understand stress-induced transformations in aged NiTi single crystals, a micro-mechanical model is used to quantify the stress fields outside perfectly coherent Ti$\sb{11}$Ni$\sb{14}$ precipitates in NiTi. Using the model, the decrease in the orientation dependence of $\sigma\sb{\rm …

    uiuc Repository record for The Effect of Stress State and Precipitation on Stress-Induced Martensitic Transformations in Polycrystalline and Single Crystal Shape Memory Alloys: Experiments and Micro-Mechanical Modeling (opens in a new tab)

  12. The Competing Roles of Microstructure and Flaw Size on the Fatigue Limit of Metals

    Research includes the development and verification of an analytical model that addresses the fatigue process, namely the threshold condition of non-propagating cracks. Two parameters are identified to govern the fatigue resistance: non-propagating crack size and crack barrier strength. The concept …

    uiuc Repository record for The Competing Roles of Microstructure and Flaw Size on the Fatigue Limit of Metals (opens in a new tab)

  13. Argon Bubble Behavior in Slide-Gate Tundish Nozzles During Continuous Casting of Steel Slabs

    "Argon injection into a tundish nozzle is an efficient and widely employed method to reduce nozzle clogging in the continuous casting process. It also affects casting operation and product quality by changing the flow pattern in the nozzle and mold. The current work combines mathematical modeling …

    uiuc Repository record for Argon Bubble Behavior in Slide-Gate Tundish Nozzles During Continuous Casting of Steel Slabs (opens in a new tab)

  14. Efficient Thermo-Mechanical Model for Solidification Processes and Its Applications in Steel Continuous Casting

    The model is then improved to add coupling of heat flow and stress generation that are increment-wise coupled through the size of the interfacial gap. Coupled results are first verified with a solidifying slice, and then quantitatively against the CON2D 2D model of billet casting by fully employing …

    uiuc Repository record for Efficient Thermo-Mechanical Model for Solidification Processes and Its Applications in Steel Continuous Casting (opens in a new tab)

  15. Mesoscale Models for Stacking Faults, Deformation Twins and Martensitic Transformations: Linking Atomistics to Continuum

    Finally, we extend the present work to martensitic transformations and determine the energy pathway for B2→B19 transformation in NiTi. Based on our ab initio DFT calculations, we propose a combined distortion-shuffle pathway for B2→B19 transformation in NiTi. Our results indicate that in …

    uiuc Repository record for Mesoscale Models for Stacking Faults, Deformation Twins and Martensitic Transformations: Linking Atomistics to Continuum (opens in a new tab)

  16. Micromechanics of Hydrogen-Induced Crack Initiation in Pipeline Steels and Subcritical Crack Growth

    To further explore the influence of hydrogen on ductile fracture, we model sustained-load cracking in the iron-base superalloy 1N903 at hydrogen pressures at which fracture is governed by plasticity. Through a micromechanics analysis, we quantify the void growth dependence on stress triaxiality and …

    uiuc Repository record for Micromechanics of Hydrogen-Induced Crack Initiation in Pipeline Steels and Subcritical Crack Growth (opens in a new tab)

  17. Transient Study of Turbulent Flow and Particle Transport During Continuous Casting of Steel Slabs

    Using the computed three-dimensional time-dependent flow velocities, the motion and capture of impurity particles during continuous casting were simulated using a Lagrangian approach. A criterion was developed to model particle pushing and capture by the solidifying shell and was incorporated into …

    uiuc Repository record for Transient Study of Turbulent Flow and Particle Transport During Continuous Casting of Steel Slabs (opens in a new tab)

  18. Elastic-Damaging Plasticity Model for Ductile Fracture

    … steels and that can be used in practical engineering problems. Ductile fracture occurs by a sequential process of nucleation, growth and coalescence of microvoids or microcracks. However, the model uses a continuum approach that can capture the global effect of ductile fracture behavior. …

    uiuc Repository record for Elastic-Damaging Plasticity Model for Ductile Fracture (opens in a new tab)

Page 1 of 43