Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"Engineering, Packaging"”.

  1. Production of Zein From Dry Milled Corn by Solvent Extraction and Ultrafiltration

    The process developed here can be easily integrated into any corn processing facility, especially dry-grind ethanol plants. The solvent extraction step involves only mixing and a filtration/centrifugation step. The filtered extract, after further treatment if necessary to improve protein purity, …

    uiuc Repository record for Production of Zein From Dry Milled Corn by Solvent Extraction and Ultrafiltration (opens in a new tab)

  2. Preparation and Properties of Flexible Resin Sheets From Zein

    … potentially useful for manufacturing flexible packaging materials. Methods of plasticizer incorporation influenced effectiveness of plasticization. Stabilizing and enhancing of plasticizer-zein complexes are crucial to accomplish plasticization.

    uiuc Repository record for Preparation and Properties of Flexible Resin Sheets From Zein (opens in a new tab)

  3. Preparation of Zein-Based Biodegradable Materials and Investigation of Their Physical Properties

    Plasticization was improved by dissolving zein and fatty acids in warm aqueous alcohol solutions. Resins were obtained through precipitation and kneading treatments. Inclusion of palmitic and stearic acid in the formulation resulted in harder resins that were suited for rolling into sheets; whereas …

    uiuc Repository record for Preparation of Zein-Based Biodegradable Materials and Investigation of Their Physical Properties (opens in a new tab)

  4. Drying Oils Treated by Irradiation as Coatings for Biobased Films

    Biobased films are potential food packaging materials. However, their performance with respect to water and gas barrier properties is inferior to current packaging products on market. Drying oils are promising as film coatings to improve water barrier properties of protein-based films. Drying oils …

    uiuc Repository record for Drying Oils Treated by Irradiation as Coatings for Biobased Films (opens in a new tab)

  5. Design of Improved Polyester Dielectric Insulators for Electronic Packaging

    First, the foaming methods used to lower the dielectric constant of the copolyester thermoset to 2.5 $\rm (25\sp\circ C,$ 1 kHz) are described. Second, the nature of the increase in melting temperature of the liquid crystalline copolyesters upon annealing near their original melting temperature to …

    uiuc Repository record for Design of Improved Polyester Dielectric Insulators for Electronic Packaging (opens in a new tab)

  6. Models for Yield Estimation of Multichip Module Ceramic Substrates

    We present improved yield models that can be used for a broader range of printed patterns. We also enhance the defect geometry models that are commonly used today. We introduce a defect geometry model that is based on the physical process of defect formation. Our defect geometry model employs …

    uiuc Repository record for Models for Yield Estimation of Multichip Module Ceramic Substrates (opens in a new tab)

  7. Finite Element Analysis of Multilayer Transmission Lines and Circuit Components

    … integrated circuits, and electronic circuit packaging and interconnects. Some difficulties encountered in numerical simulations are tackled with special treatments. First, a generalized eigenvalue problem for inhomogeneous multilayer transmission lines is formulated with the full-wave finite …

    uiuc Repository record for Finite Element Analysis of Multilayer Transmission Lines and Circuit Components (opens in a new tab)

  8. Novel Methodologies and Measurement Software for Transistor Amplifier Synthesis in Planar Coupled -Transmission Lines

    This thesis concerns the synthesis of active devices in coupled-microstrip and coupled-coplanar technology. We first discuss several aspects of multiconductor transmission line (MTL) theory, including longitudinal dependencies of immittance functions. We next describe a frequency domain normal mode …

    uiuc Repository record for Novel Methodologies and Measurement Software for Transistor Amplifier Synthesis in Planar Coupled -Transmission Lines (opens in a new tab)

  9. Shielding of Semiconductor Chips Using TiO2 and WO3 Nanoparticles (Titanium and Tungsten Nanoparticle Chip Shielding)

    … can design basic radiation shielding into the packaging of the device, which gives a small boost in reliability in high-radiation environments. This research investigates the potential of modification of semiconductor packaging material to supply radiation hardening without extra steps.

    tamu Repository record for Shielding of Semiconductor Chips Using TiO2 and WO3 Nanoparticles (Titanium and Tungsten Nanoparticle Chip Shielding) (opens in a new tab)

  10. Disturbed state constitutive modeling and testing of solders in electronic packaging

    … failure mechanism of solder joints in electronic packaging to improve the reliability of electronic packaging. Disturbed State Concept (DSC) constitutive model is a powerful tool for the simulation and prediction of material damage, failure and fatigue. Strain localization and material softening …

    arizona-thes Repository record for Disturbed state constitutive modeling and testing of solders in electronic packaging (opens in a new tab)

  11. Conjugate natural convection from a discrete heat source on a conducting plate in a shallow enclosure

    Experiments were performed to characterize the conjugate heat transfer due to a square flush heat source mounted at the center of a square horizontal plate in a small horizontal enclosure. The plate area was six times larger than the heat source area. Three different plates with heat source facing …

    arizona-thes Repository record for Conjugate natural convection from a discrete heat source on a conducting plate in a shallow enclosure (opens in a new tab)

  12. A combined experimental and analytical approach for interface fracture parameters between dissimilar materials in electronic packages

    Failure of materials and interfaces are commonly linked to the fracture parameters such as the stress intensity factors and the energy release rate. However, there exists no experimental procedure for the direct measurement of these fracture parameters. This dissertation reports on the development …

    arizona-thes Repository record for A combined experimental and analytical approach for interface fracture parameters between dissimilar materials in electronic packages (opens in a new tab)

  13. Environmental stress screening (ESS) by thermal cycling and random vibration: A physical investigation

    Temperature cycling and random vibration have proven to be the two most effective environmental stress screens. This study presents an extensive research on the physical quantification and optimization of temperature cycling and random vibration screens. For temperature cycling screen, a general …

    arizona-thes Repository record for Environmental stress screening (ESS) by thermal cycling and random vibration: A physical investigation (opens in a new tab)

  14. Reliability quantification of printed circuit boards subjected to thermal and vibration loads

    … one of the most important tasks in Reliability Engineering. During the design, development, and operational phase, this information can be very valuable to the product's designers, and users. The designers can use it to guide their design, find the design's weak points. Users can use it to setup …

    arizona-thes Repository record for Reliability quantification of printed circuit boards subjected to thermal and vibration loads (opens in a new tab)

  15. Design guidelines and synthesis of a low dielectric constant inorganic composite for high performance microelectronic packaging

    This thesis is on theoretical and experimental studies of a controlled porosity inorganic composite using hollow ceramic microspheres. It evaluated the microsphere geometry issues and physical/electrical properties important to achieving a maximum reduction of the dielectric constant of the …

    uiuc Repository record for Design guidelines and synthesis of a low dielectric constant inorganic composite for high performance microelectronic packaging (opens in a new tab)

  16. Effects of misting and modified atmosphere packaging on nutrient and market quality of broccoli

    Restriction data tranferred 2014-07-01T11:15:51-05:00 Original Data Group with Access UIUC Users [automated] Release Date: none Reason: ETDs are only available to UIUC Users without author permission

    uiuc Repository record for Effects of misting and modified atmosphere packaging on nutrient and market quality of broccoli (opens in a new tab)

  17. Production of Zein From Dry Milled Corn by Solvent Extraction and Ultrafiltration

    This research focused on developing a process for the production of low cost zein from corn using a combination of solvent extraction and membrane technology. Extraction of zein from dry milled whole corn was optimum with 70% ethanol at 50°C using a solvent-to-solids ratio of 6 ml ethanol per g …

    uiuc Repository record for Production of Zein From Dry Milled Corn by Solvent Extraction and Ultrafiltration (opens in a new tab)

  18. Investigation of Spray Cooling Schemes for Dynamic Thermal Management

    This study aims to investigate variable flow and intermittent flow spray cooling characteristics for efficiency improvement in active two-phase thermal management systems. Variable flow spray cooling scheme requires control of pump input voltage (or speed), while intermittent flow spray cooling …

    unt Repository record for Investigation of Spray Cooling Schemes for Dynamic Thermal Management (opens in a new tab)

  19. Analysis of network management protocols in optical networks

    In this thesis, the scalability issues of Simple Network Management Protocol (SNMP) in optical network management are explored. It is important to understand the effect of varying the number of nodes, the request inter-arrival times and the polling interval on the performance of SNMP and number of …

    nps Repository record for Analysis of network management protocols in optical networks (opens in a new tab)

  20. Experimental testing of convective spray cooling with the aid of an electrical field using the Coulomb force

    Continual advances in the electronics industry and other high heat-flux fields have led to a need for increased heat transfer efficiency. Spray cooling is one of many methods for removing heat from surfaces. Experimental testing conducted at West Virginia University was sponsored by the Air Force …

    wvu Repository record for Experimental testing of convective spray cooling with the aid of an electrical field using the Coulomb force (opens in a new tab)

Page 1 of 2