Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 631 for “"Engineering--Petroleum"”.

  1. POROVISCOELASTICITY AND ANALYTICAL SOLUTIONS OF SELECTED PROBLEMS IN ENGINEERING

    … for a number of practical and important engineering problems with various levels of material anisotropy: laboratory and field testing of cylinders (isotropy, transverse isotropy, and weak orthotropy), laboratory testing of rectangular strips (isotropy, transverse isotropy, and …

    oklahoma-thes Repository record for POROVISCOELASTICITY AND ANALYTICAL SOLUTIONS OF SELECTED PROBLEMS IN ENGINEERING (opens in a new tab)

  2. Characterization of Shale Sealing with Hydrogen Storage

    Hydrogen has become a promising candidate for mitigating carbon dioxide emissions, but its low density requires large storage volumes. Porous media in the subsurface have contained methane for centuries, which suggests that they could be used for hydrogen storage with specific emphasis on ensuring …

    houston Repository record for Characterization of Shale Sealing with Hydrogen Storage (opens in a new tab)

  3. A general streamline modelling technique for homogeneous and heterogeneous porous media, with application to steamflood prediction.

    The (Laplace's) equation describing the distribution of potential was solved by the Boundary Element Method (BEM) also called the Boundary Integral Element Method (BIEM). This method utilizes the superposition of singular solutions whose distributions are determined by the boundary conditions of …

    oklahoma-thes Repository record for A general streamline modelling technique for homogeneous and heterogeneous porous media, with application to steamflood prediction. (opens in a new tab)

  4. Seismic models of geopressured natural gas resevoirs /

    In order to study the seismic signatures of abnormally pressured sections, three different reservoir traps were modeled using a 40-Hz, zero-phase, Ricker wavelet and a two millisecond sample rate. MODEL A, CASES 1-2 involved a typical Oligocene sequence of the Gulf Coast Province with discrete …

    oklahoma-thes Repository record for Seismic models of geopressured natural gas resevoirs / (opens in a new tab)

  5. A laboratory study with a light crude oil to determine the effect of high-pressure nitrogen injection on enhanced oil recovery.

    Laboratory research was conducted to study displacements of crude oil by high-pressure nitrogen injection. The objectives of this research were to study the effect of temperature and gas-oil ratio in solution on crude oil recovery and miscibility process in high-pressure nitrogen injection; to …

    oklahoma-thes Repository record for A laboratory study with a light crude oil to determine the effect of high-pressure nitrogen injection on enhanced oil recovery. (opens in a new tab)

  6. AN INTEGRATED GEOMECHANICS AND PETROPHYSICS STUDY OF HYDRAULIC FRACTURING IN NATURALLY FRACTURED RESERVOIRS

    … weight function method is firstly introduced to petroleum engineering for the calculation of stress intensity factor where there are preexisting fractures intersecting borehole. Weight function parameters of a pair of symmetrical fractures emanating from borehole are derived and verified against …

    oklahoma-thes Repository record for AN INTEGRATED GEOMECHANICS AND PETROPHYSICS STUDY OF HYDRAULIC FRACTURING IN NATURALLY FRACTURED RESERVOIRS (opens in a new tab)

  7. The accuracy of pulsed neutron capture logs for residual oil saturation determinations.

    Pulsed neutron capture logs have been used to determine residual oil saturations for many years. A previous study found that at low values of residual oil saturation (ROS) conventional pulsed neutron logging techniques did not have the accuracy necessary for enhanced oil recovery decision making …

    oklahoma-thes Repository record for The accuracy of pulsed neutron capture logs for residual oil saturation determinations. (opens in a new tab)

  8. Modeling Nanofluid Utilization to Control Fines Migration

    This dissertation presents analytical solutions to address several unresolved issues on modeling of nanofluid utilization to control fines migration in porous media. Despite numerical simulations, analytical solutions derived in this dissertation yield explicit expressions in terms of controlling …

    oklahoma-thes Repository record for Modeling Nanofluid Utilization to Control Fines Migration (opens in a new tab) Restricted access

  9. New techniques to measure and control corrosion of drilling fluids at elevated temperature.

    In the rolling and static techniques, the corrosion rate is measured due to the effect of each temperature and time of exposure separately.

    oklahoma-thes Repository record for New techniques to measure and control corrosion of drilling fluids at elevated temperature. (opens in a new tab)

  10. Chemical Flood Under High Total Dissolved Solids (TDS) Conditions

    After the primary and secondary production, there is still a great potential of enhanced oil recovery (EOR). Currently, the high oil price, increase of oil demand and maturing oil fields and the improvement in surfactant performance are generating a new wave of interest in chemical flood. Chemical …

    oklahoma-thes Repository record for Chemical Flood Under High Total Dissolved Solids (TDS) Conditions (opens in a new tab)

  11. Multi-criteria optimization model for thermal recovery processes.

    In the Loco field case study, the steam drive enhances the heavy oil recovery by decreasing the oil viscosity and increasing the injectivity; therefore, a quicker return of investment is predicted. However, the in-situ combustion has a higher thermal efficiency and the steam injection adds a high …

    oklahoma-thes Repository record for Multi-criteria optimization model for thermal recovery processes. (opens in a new tab)

  12. EXPERIMENTAL INVESTIGATION, CORRELATION, AND DIMENSIONAL ANALYSIS OF NEAR-WELLBORE FORMATION TREATMENT BY GEL PARTICLES AND PARTICLE-GEL SYSTEM

    … permeability zones can create many problems in petroleum reservoirs such as lost circulation of drilling fluids and high water production in hydrocarbon producing wells. These problems cause high cost to the oil and gas industry. Thus, the conditions leading to plugging of the high permeability …

    oklahoma-thes Repository record for EXPERIMENTAL INVESTIGATION, CORRELATION, AND DIMENSIONAL ANALYSIS OF NEAR-WELLBORE FORMATION TREATMENT BY GEL PARTICLES AND PARTICLE-GEL SYSTEM (opens in a new tab)

  13. Three-Dimensional FEM Modeling of Geothermal Reservoir Stimulation Using Stochastic Fracture Networks and Continuum Damage Mechanics

    Unconventional reservoirs are gaining more and more attention in recently years. Pore pressure and temperature variations in unconventional reservoirs during stimulation are of great importance in reservoir exploration and development. Fluid injection is one of the most commonly used permeability …

    oklahoma-thes Repository record for Three-Dimensional FEM Modeling of Geothermal Reservoir Stimulation Using Stochastic Fracture Networks and Continuum Damage Mechanics (opens in a new tab)

  14. An experimental investigation on the use of a caustic-nitrogen injection process in a waterflooded oil reservoir.

    The experimental results indicated that the recovery of the residual oil is mainly dominated by the Jamin Effect, and the selective plugging of the flooded pore paths provides the necessary mechanism to overcome the Jamin Effect which prohibits the residual oil from moving. Results also showed that …

    oklahoma-thes Repository record for An experimental investigation on the use of a caustic-nitrogen injection process in a waterflooded oil reservoir. (opens in a new tab)

  15. Numerical simulation of heterogeneous fractured gas reservoir systems with turbulence and closure stress effects.

    Although techniques for designing a fracture treatment are available, the intended results of these techniques are often not attained. The evaluation of fracturing treatments on low permeability gas wells is required to both optimize the fracturing design and form prediction calculations of a …

    oklahoma-thes Repository record for Numerical simulation of heterogeneous fractured gas reservoir systems with turbulence and closure stress effects. (opens in a new tab)

  16. Techniques for evaluating and improving the performance of the iron oxides used as barite substitutes in oil well drilling fluids.

    Barite is the main weighting agent for drilling fluids because it has the required advantage of high specific gravity together with chemical inertness, and it is non-abrasive. Barite is frequently contaminated with alkaline soluble carbonate and sulfide minerals that are causing serious problems …

    oklahoma-thes Repository record for Techniques for evaluating and improving the performance of the iron oxides used as barite substitutes in oil well drilling fluids. (opens in a new tab)

  17. PREDICTIONS OF CRITICAL GAS RATES IN HORIZONTAL AND DEVIATED WELLS

    The author’s intent through this work is to shed light on the current methods of predicting the onsets of liquid loading and to clarify that there is a difference in critical gas rate predictions between horizontal and vertical wells. A new model that predicts the critical gas rates for horizontal …

    oklahoma-thes Repository record for PREDICTIONS OF CRITICAL GAS RATES IN HORIZONTAL AND DEVIATED WELLS (opens in a new tab)

  18. Fluid dynamics of well-bore bottom-hole cleaning /

    A comprehensive series of tests were run on the University of Oklahoma drilling research laboratory rig investigating the variables which influence the rate of cutting removal. No rock cutting or penetration was done in these tests as the bit was held at a preselected height, above a packed column …

    oklahoma-thes Repository record for Fluid dynamics of well-bore bottom-hole cleaning / (opens in a new tab)

Page 1 of 32