Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 76 for “"Environmental Testing"”.

  1. Environmental testing of the Petite Amateur Navy Satellite (PANSAT)

    Any complex and expensive system requires testing to ensure adequate performance. Communications satellites require extensive testing for two additional reasons: (1) they operate in an environment considerably different from that in which they were built, and (2) after launch, they are inaccessible …

    nps Repository record for Environmental testing of the Petite Amateur Navy Satellite (PANSAT) (opens in a new tab)

  2. Fusing Modeling and Testing to Enhance Environmental Testing Approaches

    … is frequently determined through modeling and testing of components. Modeling provides a cost effective method for rapidly developing a knowledge of the system, however the model is incapable of accounting for fluctuations that occur in physical spaces. Testing, when performed properly, …

    vt Repository record for Fusing Modeling and Testing to Enhance Environmental Testing Approaches (opens in a new tab)

  3. Design, Manufacturing and Environmental Testing of a Drag Sail Mechanism for CubeSat Deorbiting

    … σύμφωνα με το πρότυπο GEVS (General Environmental Verification Standard), επιβεβαίωσαν τη δομική ακεραιότητα του συστήματος σε περιβάλλον μηχανικών καταπονήσεων εκτόξευσης. Μεταγενέστερες λειτουργικές δοκιμές κατέδειξαν περαιτέρω την αντοχή και την δυνατότητα επαναχρησιμοποίησης του …

    athens Repository record for Design, Manufacturing and Environmental Testing of a Drag Sail Mechanism for CubeSat Deorbiting (opens in a new tab)

  4. Environmental testing and thermal analysis of the NPS Solar Cell Array Tester (NPS-SCAT) Cubesat

    … called NPS-SCAT and the accomplishment of environmental testing that has been completed to date in preparation for space launch. The primary mission of NPS-SCAT is to act as a Solar Cell Array Tester (SCAT), providing data on solar cell performance of various solar cells in Low Earth Orbit …

    nps Repository record for Environmental testing and thermal analysis of the NPS Solar Cell Array Tester (NPS-SCAT) Cubesat (opens in a new tab)

  5. Using Reinforcement Learning and Bayesian Optimization on Problems in Vehicle Dynamics and Random Vibration Environmental Testing

    … challenging problems in vehicle automation and environmental testing.The first part of this dissertation presents the application of Reinforcement Learning (RL) to control a vehicle to get unstuck from a ditch. A simulation model of a vehicle moving on an arbitrary ditch surface was developed, …

    duke Repository record for Using Reinforcement Learning and Bayesian Optimization on Problems in Vehicle Dynamics and Random Vibration Environmental Testing (opens in a new tab)

  6. Thermodynamics and Reaction Kinetics During Mechanochemical Synthesis and Environmental Testing of Lanthanide and Actinide Refractory Materials

    High energy ball milling is a broad family of well-known techniques for materials processing that includes mechanochemical synthesis, in which the milled materials react during milling. The latter may involve components reacting in the solid, liquid, or gas phases, and the operative kinetics have …

    boise Repository record for Thermodynamics and Reaction Kinetics During Mechanochemical Synthesis and Environmental Testing of Lanthanide and Actinide Refractory Materials (opens in a new tab)

  7. Evaluation of the thermal control system of the Petite Amateur Navy Satellite (PANSAT)

    … ar appropriate test philosophy for subsequent environmental testing of the PANS AT spacecraft. The thesis text will serve as the primary documentation for the thermal model so that it can be fully utilized to support required environmental testing.

    nps Repository record for Evaluation of the thermal control system of the Petite Amateur Navy Satellite (PANSAT) (opens in a new tab)

  8. Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging

    … when subjected to certain manufacturing and environmental testing conditions. The manufacturing condition investigated was a subsequent solder reflow process on an ACF flip-chip bonded device. The environmental testing condition investigated was the moisture test. For the manufacturing …

    greenwich Download PDF for Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging (opens in a new tab)

  9. Theory of pulse forming network design for acceleration waveform time domain replication

    … The target application of the launcher is Environmental Testing - mechanical shock - time domain replication. The new Algorithm that was used combines time, frequency, and energy domain methods to restrict the solution space before optimization. As in many other applications, the final …

    missouri Repository record for Theory of pulse forming network design for acceleration waveform time domain replication (opens in a new tab)

  10. Predictive Simulations of the Impedance-Matched Multi-Axis Test Method Using Data-Driven Modeling

    Environmental testing is essential to certify systems to withstand the harsh dynamic loads they may experience in their service environment or during transport. For example, satel- lites are subjected to large vibration and acoustic loads when transported into orbit and need to be certified with …

    vt Repository record for Predictive Simulations of the Impedance-Matched Multi-Axis Test Method Using Data-Driven Modeling (opens in a new tab)

  11. Development of CubeSat Vibration Testing Capabilities for the Naval Postgraduate School and Cal Poly San Luis Obispo

    … Launching a CubeSat, such as NPS-SCAT, requires environmental testing to ensure not only the success of the mission, but also the safety of other CubeSats housed in the same deployer. This thesis will address the development of CubeSat vibration testing methodology at NPS, including subsystem …

    calpoly Repository record for Development of CubeSat Vibration Testing Capabilities for the Naval Postgraduate School and Cal Poly San Luis Obispo (opens in a new tab)

  12. State-of-the art fiber optics and its applications to the shipboard data multiplex system

    … fibers, their optical and mechanical properties, environmental testing, design of fibers and cables and fiber systems. Specific shipboard applications of fiber optic systems are related to the Navy's Shipboard Data Multiplex System (SDMS) along with the advantages and payoffs expected with …

    nps Repository record for State-of-the art fiber optics and its applications to the shipboard data multiplex system (opens in a new tab)

  13. Effect of a derivatized oxide layer and environment on the bond durability of aluminum/polyimide and titanium/polyimide bonds

    … with LaRC-IA adhesive in a wedge test geometry. Environmental testing consisted of static and cyclical exposure for 240 hours in three atmospheres: 1) 170°C, 2 torr; 2) -20°C; 3) 60°C, 70% relative humidity. Crack propagation arrested within 48 hours. The order of durability in static …

    vt Repository record for Effect of a derivatized oxide layer and environment on the bond durability of aluminum/polyimide and titanium/polyimide bonds (opens in a new tab)

  14. Failure Analysis of Blistered Organic Coatings on Gray Iron Castings

    … were tested with designed experiments using environmental testing in humidity and submersion environments. Thicker primer layers resulted in significant reductions in blistering and prolonged the time required before blister formation. A basecoat containing zinc phosphate was not found to be …

    mtu Repository record for Failure Analysis of Blistered Organic Coatings on Gray Iron Castings (opens in a new tab)

  15. Investigation of Techniques for High Speed CMOS Arbitrary Waveform Generation

    … in design engineering, production and environmental testing, and system service require specific analog waveforms and digital patterns. Such requirements are neither satisfactorily nor easily met by the use of standard function or single purpose, custom generators. Traditional methods …

    portland-state Repository record for Investigation of Techniques for High Speed CMOS Arbitrary Waveform Generation (opens in a new tab)

  16. Optical analysis of plate modes in circuit boards using a multi-axis shaker table

    Traditionally, vibration testing has employed single-axis shakers to replicate environmental conditions, but multi-axis environmental testing strategies have received recent attention as they may more accurately represent dynamic field environments. Here we demonstrate, for a clamped-clamped plate, …

    texas Repository record for Optical analysis of plate modes in circuit boards using a multi-axis shaker table (opens in a new tab)

  17. Design and Validation of Hardware-in-the-Loop Testbed for Proximity Operations Payloads

    … is a new testbed design for CubeSat and payload testing and development. This research demonstrates a low-cost, hardware-in-the-loop testing apparatus for use with university CubeSat programs for testing throughout the different levels of the development process. The average university CubeSat …

    embry-riddle Repository record for Design and Validation of Hardware-in-the-Loop Testbed for Proximity Operations Payloads (opens in a new tab)

Page 1 of 4