Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 102 for “"Epichlorohydrin"”.
-
Set behaviour of epichlorohydrin elastomers
Traditionally Epichlorohydrin (ECO) elastomers are cured by thiourea (ETU)-Lead (PbO) curing systems. However, owing to the current concerns regarding health, safety and the environment such systems are now classified as relatively high risk systems. ECO elastomers are widely used as seals and …
-
A study of the fatty alcohol-epichlorohydrin reaction
… reaction between "Lorol" 5 fatty alcohol and epichlorohydrin was found to proceed at a rate which could easily be followed, at temperatures of 80 to 140°C, when catalyzed with 0.05 percent of a boron trifluoride ether-ate catalyst, based on the total weight of reactants. The reaction was …
-
Bis phenol epichlorohydrin condensate modification of alkyd resins
… of alkyd resin systems with Bis-Phanol Epichlorohydrin Condensates.</p><p>The properties of the modified alkyd resins are evaluated using similar unmodified alkyd resins as reference.</p><p>A theory of linear esterification is postulated.</p>
-
Method development for the determination of epichlorohydrin in drinking water
… was to develop a method for the determination of epichlorohydrin in drinking water. First, epichlorohydrin was studied on gas chromatography (GC) to determine the retention time. Then, epichlorohydrin was used to optimise the GC parameters : best detector, detector temperature, total detector …
-
A study of the preparation of pyrazole and its derivatives by the interaction of epichlorohydrin and hydrazines, and a study of their properties
… of 1-phenylpyrazole from phenylhydrazine and epichlorohydrin has been considerably improved; this method affords the best route to this compound. A possible reaction sequence in this synthesis is discussed, and evidence is offered to support it. 2. The reaction of epichlorohydrin with …
-
Additives Impact On Wet Strength And Size Development In Papermaking- Polyamide Epichlorohydrin (PAE), Alkenyl Succinic Anhydride (ASA) And Alkyl Ketene Dimer (AKD) Cases
… of wet strength additive such as PAAE (polyamide epichlorohydrin) and hydrophobicity loss due to ASA (alkenyl succinic anhydride) and AKD (alkyl ketene dimer) size reversion not only increase cost and reduce product quality in the mill but also increase customer complaints and rejections.In this …
-
Synthesis and properties of lignin epoxide
… guaiacol (a lignin-like model compound) and epichlorohydrin using a catalyst system of potassium hydroxide and a phase transfer catalyst in toluene. The parameters studied were different epichlorohydrin level and temperature. The reaction was followed by HPLC and the structure of the product …
-
Green Chemistry Design Of Epoxies From Biomass For Circular Economy
… mainly manufactured from bisphenol-A (BPA) and epichlorohydrin (EPH). These raw materials are sourced from fossil fuel resources and are acutely toxic and carcinogenic. With emerging environmental concerns on climate and atmosphere, raw materials not sourced from fossil fuels are vital. In …
-
Aproveitamento do resíduo de algodão da indústria têxtil para síntese de hidrogel de celulose
… minutes. Subsequently, it was crosslinked with epichlorohydrin and post-treated by freezing or heating. To obtain the hydrogel, the waste was dissolved in a solution of 6% NaOH and 4% urea at 50°C, under agitation at 6.5 rpm for 30 minutes. The results indicate that hydrogel production depends …
-
Cobalt MOF-5 : a novel catalyst for CO2 conversion to carbonates.
… phosgene. The cycloaddition of carbon dioxide to epichlorohydrin, or other epoxides, can produce carbonates without the use of phosgene. A catalyst with high surface area, Lewis acid sites, and an affinity for carbon dioxide is required to develop carbonates using carbon dioxide. A cobalt doped …
-
Bound antioxidants in elastomers
… are found to react with chloroprene (CR) and epichlorohydrin (ECH) rubbers with their reactive chlorine atoms. These reactions take place during high shear mixing in a torque rheometer or in a Winkworth mixer at high temperature or during the vulcanization of the elastomers at 160°C. Mixed …
-
Synthesis and Application of Oil-Soluble Polymer Brush-Grafted Silica Nanoparticles as Lubricant Additives for Friction and Wear Reduction
… by the reaction of corresponding poly(epichlorohydrin) with various n-alkanethiols and subsequent oxidation of thioether groups with a goal of seeking ferroelectric liquid crystalline polymers for use in solid state cooling. The isotactic poly((R)-epichlorohydrin) was synthesized by …
-
Interaction of boron trichloride with alcohols and ethers containing chlorine
… Ethylene oxide, propylene oxide and epichlorohydrin formed no complexes with boron trichloride, but afforded immediately 2-chloroalkyl dichloroboronites. Derivatives of 2-(2-chloroethoxy)-ethanol resulted from a certain experiment with ethylene oxide and similar evidence of …
-
Recovery of α-lactalbumin from whey protein isolate and osteopontin from milk by anion exchangers : a thesis presented in partial fulfilment of the requirements for the degree of Master of Philosophy in Chemistry at Massey University, New Zealand
… coupled to Sepharose, which was activated by epichlorohydrin first, to prepare amino anion exchangers DMEA-Seph, DMH-Seph, DMO-Seph, DMD-Seph, DMDo-Seph, and Do-Seph. The batch binding of α-lactalbumin and ß-lactoglobulin in 25 mM NaCl at around proteins' IEP to these exchangers and a …
-
Experimental investigations of Al-based initiator for (co)polymerization of epoxides and episulfide and application toward membrane synthesis
… facilitated polymerization of various epoxides (epichlorohydrin, propylene oxide, etc.) and episulfide up to molecular weights of 100 kg/mol while maintaining relatively narrow polydispersity (D <1.3). The initiator was simply synthesized through the reaction of a thiol ligand and trialkyl …
-
The Copolymerization of CO_(2) and Cyclic Ethers and Their Degradation Pathways
… different epoxides: styrene oxide, epichlorohydrin, and propylene oxide. Thermodynamically stable cyclic carbonate byproducts are produced during the course of the reaction from the degradations of propagating polymer chains. The depolymerization reactions of several polycarbonates …
-
Curing Properties of Epoxy Resins for Use to Abandon Wells Destroyed by Hurricanes in the Gulf of Mexico
… systems in different environments. A bisphenol-F/epichlorohydrin (BPF) resin cured by curing agent MBOEA system was successfully tested in the laboratory as a potential plugging material to abandon wells destroyed in the GOM. The BPF/MBOEA resin system had the most suitable curing time in a …
Page 1 of 6