Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"Epoxy molding compound"”.

  1. Development of a fatigue-compatible cohesive zone method for a copper-epoxy molding compound bimaterial interface

    … is needed. This present work focuses on copper/epoxy mold compound (EMC) interfacial delamination under fatigue loading both through experiments as well as computational modeling. The performed characterization relies primarily on double cantilever beam tests but also other test configurations …

    gatech Repository record for Development of a fatigue-compatible cohesive zone method for a copper-epoxy molding compound bimaterial interface (opens in a new tab)

  2. Measurement of Effective Cure Shrinkage of Epoxy Molding Compound and Induced In-line Warpage during Molding Process

    … stresses inside molded components. The ECS of an epoxy-based molding compound (EMC) is measured by an embedded fiber Bragg grating (FBG) sensor. Under a typical molding condition, a high mold pressure inherently produces large friction between EMC and mold inner surfaces, which hinders EMC from …

    maryland Repository record for Measurement of Effective Cure Shrinkage of Epoxy Molding Compound and Induced In-line Warpage during Molding Process (opens in a new tab)

  3. CHARACTERIZATION OF TiN, CrN AND (TIXCR0.6-X)N 0.4 COATINGS AND THEIR TRIBOLOGICAL BEHAVIORS SLIDING AGAINST EPOXY MOLDING COMPOUND

    Epoxy molding compound (EMC) is a commonly used material in IC encapsulation. During encapsulation, the surface of molding tools suffers serious wear caused by rubbing of EMC. In view of the trend of increasing filler percentage, the wear problem on processing tools will become more significant. …

    nus Repository record for CHARACTERIZATION OF TiN, CrN AND (TIXCR0.6-X)N 0.4 COATINGS AND THEIR TRIBOLOGICAL BEHAVIORS SLIDING AGAINST EPOXY MOLDING COMPOUND (opens in a new tab) Download file for CHARACTERIZATION OF TiN, CrN AND (TIXCR0.6-X)N 0.4 COATINGS AND THEIR TRIBOLOGICAL BEHAVIORS SLIDING AGAINST EPOXY MOLDING COMPOUND (opens in a new tab)

  4. SYNTHESIS AND CHARACTERIZATION OF FULLERENE-BASED NANOPARTICLE COMPOSITES FOR MOLDING COMPOUND APPLICATION

    … coating materials, to name several. In the mold compound area of interest, it is believed that the addition of nanoparticles into the polymer system can improve its mechanical and thermal properties, creating nanocomposites with high glass transition temperature, good physical stability, and low …

    nus Repository record for SYNTHESIS AND CHARACTERIZATION OF FULLERENE-BASED NANOPARTICLE COMPOSITES FOR MOLDING COMPOUND APPLICATION (opens in a new tab) Download file for SYNTHESIS AND CHARACTERIZATION OF FULLERENE-BASED NANOPARTICLE COMPOSITES FOR MOLDING COMPOUND APPLICATION (opens in a new tab)

  5. DENSE 3D HETEROGENEOUS INTEGRATION USING SELECTIVE COBALT ALD DEPOSITION AND RECONSTITUTED TIERS

    … tier before stacking. Compared with conventional epoxy-molding-compound-based stacking, the SiO2 approach can have smaller loss tangent (10x), lower CTE mismatch (3x) and the higher via density (>400x). The thickness of the proposed technology can be over 10 times smaller than conventional epoxy …

    gatech Repository record for DENSE 3D HETEROGENEOUS INTEGRATION USING SELECTIVE COBALT ALD DEPOSITION AND RECONSTITUTED TIERS (opens in a new tab)

  6. Epoxy/triazine based high performance molding compound for next generation power electronics packaging

    … on the packaging materials especially on epoxy molding compound (EMC) technologies, since the temperature exceeds the stability limit of typical epoxy (EP) chemistry. In this thesis, EP/triazine system was selected to develop high temperature stable resin system that can meet the …

    gatech Repository record for Epoxy/triazine based high performance molding compound for next generation power electronics packaging (opens in a new tab)

  7. HYGROTHERMALLY-INDUCED DELAMINATION AND CRACKING IN PLASTIC IC PACKAGES

    … due to high moisture permeability of the typical epoxy molding compound. During solder reflow, the high temperature together with the previously absorbed moisture will result in high hygrothermal stresses at material interfaces due to the mismatch in thermal expansion coefficient of the …

    nus Repository record for HYGROTHERMALLY-INDUCED DELAMINATION AND CRACKING IN PLASTIC IC PACKAGES (opens in a new tab) Download file for HYGROTHERMALLY-INDUCED DELAMINATION AND CRACKING IN PLASTIC IC PACKAGES (opens in a new tab)

  8. Study on epoxy based composites for high temperature molding compounds

    Epoxy molding compound (EMC) is one of the most widely used encapsulation materials for electronic packaging. To provide substantial protection for the electronic packages, EMCs are frequently required to work at elevated temperature, especially when high power and high density devices are …

    gatech Repository record for Study on epoxy based composites for high temperature molding compounds (opens in a new tab)

  9. Advanced Adhesion Strength Testing Methods of Thin Film Multilayers in Electronic Packaging Systems

    … test (SCAT)” is proposed and implemented for an epoxy molding compound (EMC) and photo solder resist (PSR) interface. The test method is then shown to be capable of comparing and selecting the stronger of two potential EMC/PSR material sets. Additionally, a theoretical approach for establishing …

    maryland Repository record for Advanced Adhesion Strength Testing Methods of Thin Film Multilayers in Electronic Packaging Systems (opens in a new tab)

  10. TIME-TEMPERATURE DEPENDENT CHARACTERIZATION OF POLYMERS FOR ACCURATE PREDICTION OF STRESSES IN ELECTRONIC PACKAGES

    Epoxy molding compound (EMC) is a thermosetting polymer filled with inorganic fillers such as fused silica. EMC has been used extensively as a protection layer in various semiconductor packages. The warpage and the residual stress of packages are directly related to the thermomechanical properties …

    maryland Repository record for TIME-TEMPERATURE DEPENDENT CHARACTERIZATION OF POLYMERS FOR ACCURATE PREDICTION OF STRESSES IN ELECTRONIC PACKAGES (opens in a new tab)

  11. Characterization of Non-linear Polymer Properties to Predict Process Induced Warpage and Residual Stress of Electronic Packages

    … low viscosity, high temperature curing), and epoxy molding compound (EMC: high modulus, high viscosity, high temperature pressure curing), most notably, (1) zero-constraint mold for elastomers; (2) a two-stage curing procedure for underfill materials and (3) an air-cylinder based novel setup …

    maryland Repository record for Characterization of Non-linear Polymer Properties to Predict Process Induced Warpage and Residual Stress of Electronic Packages (opens in a new tab)

  12. SURFACE MODIFICATION AND FUNCTIONALIZATION OF POLYMERS VIA GRAFT COPOLYMERIZATION AND ITS RELEVANCE TO ADHESION

    … failure occurs in the interfacial region. For epoxy adhesive-promoted adhesion, the failure mode is cohesive, i.e. takes place in the bulk of one of the delaminated PTFE films. The interactions between evaporated Al and AAc and GMA graft copolymerized, pristine and Ar plasma treated PTFE …

    nus Repository record for SURFACE MODIFICATION AND FUNCTIONALIZATION OF POLYMERS VIA GRAFT COPOLYMERIZATION AND ITS RELEVANCE TO ADHESION (opens in a new tab) Download file for SURFACE MODIFICATION AND FUNCTIONALIZATION OF POLYMERS VIA GRAFT COPOLYMERIZATION AND ITS RELEVANCE TO ADHESION (opens in a new tab)

  13. Experimental and Computational Study on Fracture Mechanics of Multilayered Structures

    … in flexible electronics and Cu leadframe/epoxy molding compound (EMC) in micro-electronics packaging. In the first example, aluminum-manganese (Al-Mn) thin films with Mn concentration up to 20.5 at.% were deposited on polyimide (PI) substrates. A variety of phases, including supersaturated …

    usf Repository record for Experimental and Computational Study on Fracture Mechanics of Multilayered Structures (opens in a new tab)

  14. Spritzgießtechnische Herstellung duroplastgebundener Dauermagnete

    … anisotrope Magnetpartikel in den Kunststoff eincompoundiert und während der Verarbeitung im Spritzgießverfahren orientiert. Dies geschieht durch ein integriertes Magnetfeld im Spritzgießwerkzeug. Insbesondere sollen der Einfluss des Matrixmaterials, der Partikelgeometrie, der Fließrichtung sowie …

    qucosa-diss