Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 246 for “"Equiaxed"”.

  1. Modelling columnar and equiaxed growth

    … computer model of the evolution of columnar and equiaxed microstructure during alloy solidification has been developed. A control volume finite difference model of conduction heat transfer is applied to a two-dimensional domain bounded by a relatively cold mould. The initial condition is that of …

    oxford Repository record for Modelling columnar and equiaxed growth (opens in a new tab)

  2. The melting behavior of equiaxed grain boundaries

    … of grain boundaries, particularly those of the "equiaxed" type, on applied stress, orientation difference, boundary orientation, growth conditions, and purity. By a comparison with previous work on columnar boundaries it was concluded that there was no structural difference between equiaxed and …

    ubc Repository record for The melting behavior of equiaxed grain boundaries (opens in a new tab) Download PDF for The melting behavior of equiaxed grain boundaries (opens in a new tab)

  3. Columnar to equiaxed transition in tin-lead alloys

    The columnar to equiaxed transition has been examined experimentally in lead-tin alloys. The effect of thermal conditions during solidification, melt superheat, and alloy composition on the transition have been considered. In directionally solidified alloys, the position at which the transition …

    ubc Repository record for Columnar to equiaxed transition in tin-lead alloys (opens in a new tab) Download PDF for Columnar to equiaxed transition in tin-lead alloys (opens in a new tab)

  4. External Boundary Conditions for Solidification Process Modeling of Equiaxed Investment Castings

    The equiaxed investment casting process is a multi-physics problem which requires knowledge from engineers who have expertise in materials, metallurgy, fluid dynamics, thermodynamics, and heat transfer. Process modeling is a tool used by foundries to help predict casting defects such as shrinkage …

    ucf Repository record for External Boundary Conditions for Solidification Process Modeling of Equiaxed Investment Castings (opens in a new tab)

  5. The columnar to equiaxed transition in Pb-Sn and Sn-Pb alloys

    The columnar to equiaxed transition has been studied experimentally using accurate temperature measurements and with a heat transfer mathematical model in Pb-1.5%Sn and Sn-10%Pb alloys. The behaviour of the two alloys was markedly different. In the Pb-1.5%Sn alloy, the transition did not occur …

    ubc Repository record for The columnar to equiaxed transition in Pb-Sn and Sn-Pb alloys (opens in a new tab) Download PDF for The columnar to equiaxed transition in Pb-Sn and Sn-Pb alloys (opens in a new tab)

  6. The columnar to equiaxed transition in nickel based superalloys AM1 and MAR-M200+Hf

    The columnar to equiaxed transition (CET) in Ni based superalloys AM1, electron beam remelted AM1 and MAR-M200+Hf was studied using bars instrumented with thermocouples to determine the critical solidification conditions leading to the CET. Two sets of experiments were conducted in the course of …

    ubc Repository record for The columnar to equiaxed transition in nickel based superalloys AM1 and MAR-M200+Hf (opens in a new tab) Download PDF for The columnar to equiaxed transition in nickel based superalloys AM1 and MAR-M200+Hf (opens in a new tab)

  7. Microstructural effects on the stability of retained austenite in transformation induced plasticity steels

    … between coarser bainitic ferrite laths, the Equiaxed microstructure had equiaxed austenite grains in a matrix of equiaxed ferrite and the Acicular microstructure had elongated austenite grains surrounded by recovered ferrite laths. Tensile tests were performed and detailed characterization, …

    queens Repository record for Microstructural effects on the stability of retained austenite in transformation induced plasticity steels (opens in a new tab)

  8. Modeling Fatigue Behavior of 3D Printed Titanium Alloys

    … Three different microstructures, i.e., cubic equiaxed, random equiaxed, and rolled equiaxed microstructures, are analyzed. The FIP results show that the cubic equiaxed grains have the best fatigue resistance due to their isotropic structural characteristics. Additionally, the grain size effect …

    iupui Repository record for Modeling Fatigue Behavior of 3D Printed Titanium Alloys (opens in a new tab)

  9. The Effect of Phase Morphology and Volume Fraction of Retained Austenite on the Formability of Transformation Induced Plasticity Steels

    … two separate morphologies of retained austenite, equiaxed versus lamellar, have been produced through thermo-mechanical processing of a single common TRIP steel chemistry. The sheet formability characteristics of these two microstructures were examined, with varying volume fractions of retained …

    queens Repository record for The Effect of Phase Morphology and Volume Fraction of Retained Austenite on the Formability of Transformation Induced Plasticity Steels (opens in a new tab)

  10. Effect of Microstructure on Retained Austenite Stability and Tensile Behaviour in an Aluminum-Alloyed TRIP Steel

    … steel to obtain a microstructure consisting of equiaxed grains of ferrite surrounded by bainite, martensite and RA -- the equiaxed microstructure. The second microstructure was produced by first austenitizing and quenching the steel to produce martensite, followed by the two-step heat treatment. …

    queens Repository record for Effect of Microstructure on Retained Austenite Stability and Tensile Behaviour in an Aluminum-Alloyed TRIP Steel (opens in a new tab)

  11. Modeling transport phenomena and uncertainty quantification in solidification processes

    … in a rectangular cavity with both columnar and equiaxed solid growth models. This analysis was followed by quantifying the uncertainty in predictions from the recently developed transient DC casting model. The PRISM Uncertainty Quantification (PUQ) framework quantified the uncertainty and …

    purdue-thes Repository record for Modeling transport phenomena and uncertainty quantification in solidification processes (opens in a new tab)

  12. Microstructural changes in aluminum under reversing strains

    … optical microscopy. In reverse path specimens, equiaxed grains were seen. In forward path specimens by low magnification polarized optical microscopy, grain alignment increased with strain whereas it decreased in reverse path specimens. Orientation imaging microscopy revealed during the forward …

    concordia Download PDF for Microstructural changes in aluminum under reversing strains (opens in a new tab)

  13. Mold behavior, heat transfer and quality of billets cast with in-mold electromagnetic stirring

    … mold-related quality and the columnar-to-equiaxed transition influenced by in-mold EMS were examined by performing trials at two steel companies, metallurgical examination of the billet samples and mathematical modelling. The thermal fields in the walls of billet molds (102 X 102mm and 127 …

    ubc Repository record for Mold behavior, heat transfer and quality of billets cast with in-mold electromagnetic stirring (opens in a new tab) Download PDF for Mold behavior, heat transfer and quality of billets cast with in-mold electromagnetic stirring (opens in a new tab)

  14. Formation of Ti₃Al and its embrittling effects on titanium-aluminum alloys

    … times are required to produce susceptibility in equiaxed α-grains resulting from annealing in the (α+β) region. Toughness is less affected as a result of aging a Widmanstatten structure than an equiaxed structure, although the reduction is significant in both cases.

    vt Repository record for Formation of Ti₃Al and its embrittling effects on titanium-aluminum alloys (opens in a new tab)

  15. Process-Structure-Property Relationships in Closed-Loop Temperature-Controlled Additive Friction Stir Deposition of Ti-6Al-4V

    … morphologies in the stir zone varied from equiaxed, as in the 700 ºC temperature setpoint, to lamellar, as in the 850 ºC temperature setpoint. The intermediate 750 ºC and 800 ºC temperature setpoints exhibited mixed microstructures with a mix of both equiaxed and lamellar characteristics. …

    utk-theses Repository record for Process-Structure-Property Relationships in Closed-Loop Temperature-Controlled Additive Friction Stir Deposition of Ti-6Al-4V (opens in a new tab)

  16. Microstructural formations and phase transformation pathways in tantalum carbides

    … Depending on carbon content, the grains were equiaxed, equiaxed with a cross-hatch pattern of thin laths of secondary phases, to acicular grains. The microstructures were quantified through a series of different 2D and 3D analytical techniques. To understand how these microstructures …

    alabama Repository record for Microstructural formations and phase transformation pathways in tantalum carbides (opens in a new tab)

  17. Phase-Fields and the Renormalization Group: A Continuum Approach to Multiscale Modeling of Materials

    … of confinement on dendritic growth, during equiaxed solidification in a pure material and the directional solidification of a dilute binary alloy, using phase-field models.

    uiuc Repository record for Phase-Fields and the Renormalization Group: A Continuum Approach to Multiscale Modeling of Materials (opens in a new tab)

  18. CONTROL OF GRAIN STRUCTURE IN SELECTIVE-ELECTRON BEAM MELTING OF NICKEL-BASED SUPERALLOYS

    … step in research as site specific columnar or equiaxed grain structure can give the process further advantage over traditional processing. Previous work has used alloys that were designed for casting processes and have not tried to control the columnar to equiaxed transition (CET) by changing …

    utk-theses Repository record for CONTROL OF GRAIN STRUCTURE IN SELECTIVE-ELECTRON BEAM MELTING OF NICKEL-BASED SUPERALLOYS (opens in a new tab)

  19. Fatigue crack propagation threshold in lamellar TiAl alloys

    … effect of lamellar spacing, volume fraction of equiaxed gamma grains and lamellar orientation on fatigue crack propagation threshold have been assessed for three as-cast γ-TiAl alloys, Ti45Al2Mn2Nb1B (4522XD), Ti45Al2Mn2Nb (4522) and Ti46Al8Nb (at %). The influence of alloying elements, Nb and …

    birmingham Download PDF for Fatigue crack propagation threshold in lamellar TiAl alloys (opens in a new tab)

Page 1 of 13