Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"Equivalent Lateral Force"”.

  1. Optimized Distribution of Strength in Buckling-Restrained Brace Frames in Tall Buildings

    … first mode response as determined from the Equivalent Lateral Force (ELF) procedure. For tall buckling restrained braced frames (BRBFs), two questions remain unanswered: what brace distribution will minimize total brace area, while satisfying story drift and ductility limits, and is the ELF …

    byu Repository record for Optimized Distribution of Strength in Buckling-Restrained Brace Frames in Tall Buildings (opens in a new tab) Download PDF for Optimized Distribution of Strength in Buckling-Restrained Brace Frames in Tall Buildings (opens in a new tab)

  2. A Comparison of Optimized Nonlinear Time History Analysis and the Equivalent Lateral Forces Method for Brace Design

    … seismic base shear, and the distribution of equivalent lateral forces. Yielding and drift criteria are then used to determine brace areas. This design procedure is referred to throughout the thesis as the "Equivalent Lateral Force Procedure" (ELF). The thesis compares results from the NTHO …

    byu Repository record for A Comparison of Optimized Nonlinear Time History Analysis and the Equivalent Lateral Forces Method for Brace Design (opens in a new tab) Download PDF for A Comparison of Optimized Nonlinear Time History Analysis and the Equivalent Lateral Forces Method for Brace Design (opens in a new tab)

  3. The Nature of the Vertical Distribution of Seismic Responses in Multi-Story Structures

    … seismic response patterns in multi-story reinforced concrete and steel structures. Seismic responses of buildings designed by conventional force-based or displacement-based approaches result in significant force demands compared to nominal design as observed in both experimental studies and …

    arizona-thes Repository record for The Nature of the Vertical Distribution of Seismic Responses in Multi-Story Structures (opens in a new tab)

  4. Shake table testing of a two-story CLT platform building

    … of a more realistic building system. The Equivalent Lateral Force (ELF) procedure was used in the design of the stacked CLT shear walls, with the assumption that shear was resisted entirely by generic angle brackets, and the overturning moment was resisted by tie-down rods on either end of …

    colostate Repository record for Shake table testing of a two-story CLT platform building (opens in a new tab)

  5. Capacity design methods for strongback braced frames

    … braces for energy dissipation and the truss for force distribution.However, strongback braced frames do not have well-established design criteria. Specifically, there is no generally accepted method for ensuring that the strongback remains elastic, and seismic performance factors have not been …

    ut-knoxville Repository record for Capacity design methods for strongback braced frames (opens in a new tab)

  6. Seismic Response Control Of Structures Using Semi-Active and Passive Variable Stiffness Devices

    … the current seismic design codes is proposed. An equivalent lateral force distribution is developed that shows a good agreement with the response history analyses in terms of seismic performance and demand prediction. This lateral force pattern explicitly accounts for the higher mode effect, the …

    unr Repository record for Seismic Response Control Of Structures Using Semi-Active and Passive Variable Stiffness Devices (opens in a new tab)

  7. Performance-based Seismic Design of Multi-Story Light-frame Wood Buildings using Adaptive Displacement-based Design Procedure

    … however, they add strength to the overall lateral load resisting system. When both the structural elements (prescribed by engineers) and non-structural elements (partition walls sheathed with gypsums) are considered, vertical irregularities in strength and stiffness often occur in buildings …

    clemson Repository record for Performance-based Seismic Design of Multi-Story Light-frame Wood Buildings using Adaptive Displacement-based Design Procedure (opens in a new tab)

  8. A Comparative Study on Seismic Analysis Methods and the Response of Systems with Classical and Nonclassical Damping

    … (ASCE 7-10) and used for application of the Equivalent Lateral Force Procedure (ELFP) and Response Spectrum Analysis (RSA). When applying RSA, the modal peak responses were combined using the Absolute Sum (ABS), Square-Root-of-the-Sum-of-Squares (SRSS), and Complete Quadratic Combination …

    calpoly Repository record for A Comparative Study on Seismic Analysis Methods and the Response of Systems with Classical and Nonclassical Damping (opens in a new tab)

  9. Integrated seismic assessment and design of plan-irregular structures

    … the inelastic torsional response of reinforced concrete structures, both regular and irregular in plan. The concept of “kinematic eccentricity” is introduced, which is the eccentricity that arises from inelastic deformations even when the original structure is perfectly symmetric. In …

    uiuc Repository record for Integrated seismic assessment and design of plan-irregular structures (opens in a new tab)

  10. Comparative response of mid-rise (9-story) based-isolated and conventional steel moment resisting frame buildings

    … analysis, response spectrum analysis (RSA) and equivalent lateral force (ELF) procedure were performed to verify the design of the 9-story buildings. Finally, nonlinear dynamic analyses were carried out to investigate the responses for 9-story isolated and conventional buildings under 50/50, …

    unr Repository record for Comparative response of mid-rise (9-story) based-isolated and conventional steel moment resisting frame buildings (opens in a new tab)

  11. Simplified Seismic Design for Mid-Rise Buildings with Vertical Combination of Framing Systems

    … of a structural system in which the seismic-force-resisting-system (SFRS) of the upper structure is commonly a lightweight structural system such as cold-formed steel (CFS) frame or wood frame, while the SFRS associated with the lower one adopts a traditional structural system, such as …

    waterloo Repository record for Simplified Seismic Design for Mid-Rise Buildings with Vertical Combination of Framing Systems (opens in a new tab)