Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Equivalent Plastic Strain"”.
-
Study on Laser Surface Enhancement of Marine Propellers
… the longitudinal residual stresses and the equivalent plastic strain were increased. But, after grinding the cladded substrate, there was an improvement in the equivalent plastic strain. The inference obtained after multiple simulations were that the grinding process improves the equivalent …
-
Single crystal plasticity and plastic strain gradient effects: -: -
This work develops a unified crystal plasticity framework that bridges local and non-local formulations to model the elastoplastic response of crystalline metals across scales, with a particular focus on body-centered cubic (BCC) crystals. The proposed implicit strain-gradient constitutive model …
-
Size Effects in Small Scale Forward Extrusion and Metal Forming
… thickness distribution, von-Mises contours, and equivalent plastic strain contours were compared for different thickness specimens. Finally, the models were validated by experimental results.
-
Investigation of Taylor impact test of isotropic and anisotropic material through geometrical characteristics of specimens
In this thesis, high strain rate properties of isotropic material (a copper alloy) and anisotropic material (2195-T8 aluminum-lithium alloy) are investigated using Taylor impact tests. Coordinate measuring machines (CMMs) are used to measure the shape of specimens after the deformation. The …
-
Formulation, analysis and solution algorithms for a model of gradient plasticity within a discontinuous Galerkin framework
An investigation of a model of gradient plasticity in which the classical von Mises yield function is augmented by a term involving the Laplacian of the equivalent plastic strain is presented. The theory is developed within the framework of non-smooth convex analysis by exploiting the equivalence …
-
Indentation Behavior of Multilayer Al/SiC Thin Films
… of the indenter to the undulation. The amount of equivalent plastic strain in the Al layers also increases in the presence of undulating layers. These multilayer films exhibit interesting and complex mechanical behavior under indentation type loading and unloading. The derivation of Young's …
-
Steel fracture modeling at elevated temperature for structural-fire engineering analysis
… In the first part of this study, true stress-strain curves were developed for structural steel at ambient and elevated temperatures that extend to very large, post-necking strains. Then two different fracture criteria were studied for modeling steel fracture at ambient and elevated …
-
A Modified Elasto-Plastic Pressure Dependent Numerical Combined Hardening Model for Characterizing Permanent Deformation under Cyclic Loading
… frequent passes of aircraft tires. An elasto-plastic model having a progressively evolving yield surface with the introduction of a new parameter, $\gamma$, has been introduced in this dissertation. The mechanism allows yield surface to progressively evolve and reduce in size, even in the case …
-
Microstructure-Based Computational Modeling of TRIP Steels with Dispersed Particles
… the behavior of transformation induced plasticity (TRIP) steels and particle reinforced composites are combined and investigated. A finite element model (FEM) is created to investigate the effects of dispersed ceramic particles with varying parameters throughout a TRIP steel …
-
Fatigue reliability and post-fracture residual capacity of a two-girder steel bridge
… is evaluated by comparing the resulting equivalent plastic strain to the failure strain of steel. The results show that the bridge provides sufficient redundancy to redistribute the load after full depth fracture a FC member. Furthermore, the results of the probabilistic analyses provide …
-
Experimentation and simulation of the evolution of stress in fillet-welded A36 steel patch plates due to crevice corrosion
… the resulting expansion can propagate stress and plastic strains to the weld-plate interface and cause permanent deformation. This can undermine the structural and material integrity of the weld and plate system. The impact is investigated using Finite Elemental Analysis (FEA) to validate and …
-
Investigating the evolution of microtextured region in Ti-6242 using FE-FFT multiscale modeling method
… with different loading directions using crystal plasticity finite element method, and the results are validated against high-temperature compression experiments and EBSD measurement. The evolution of equivalent plastic strain, accumulated shear strain, and misorientation distribution is analyzed …
-
Fracture toughness, crack path and strength mismatch of Alloy 52 dissimilar metal weld
… articles. The strength mismatch affects the plastic η-factor used for determining the fracture toughness. The results show that the plastic η-factors determined at an interface between a hard and a soft material are equal to the solutions developed for homogeneous specimens. Variations in …
-
EXPERIMENTS AND MODELING OF PLASTIC ANISOTROPY AND DUCTILE FRACTURE UNDER MULTIAXIAL LOADING
… extensive experimental and numerical study of plastic anisotropy and ductile fracture of several aluminum alloys and a stainless-steel. The test materials used for this study include AA365 die-casting, AA6013 and AA6111 aluminum sheets, AA6260 aluminum tube and SS304L stainless-steel microtube. …
-
Non-Linear Finite Element Method Simulation and Modeling of the Cold and Hot Rolling Processes
… slab and the steel rolls. The model predicts the equivalent stress, equivalent plastic strain, maximum strain rate, equivalent total strain, slab temperature increase, increase in roll temperature, strip length increase, slab thickness % reduction (draft), and strip's velocity increase, for both …
-
Compliant copper microwire arrays for reliable interconnections between large low-CTE packages and printed wiring board
… electrical performance while meeting the cost constraints are needed to address these challenges. This thesis focuses on a comprehensive methodology starting with modeling, design, fabrication and characterization to validate such stress-relief structures. This study specifically explores …
-
An Experimental Study of Deformation and Failure of Magnesium Alloys under Multiaxial Stress State
… slip activities result in a unique rise of the strain hardening rate, resulting in sigmoidal equivalent stress-equivalent plastic strain curves with three distinct distinctive stages of strain hardening. The biaxial stress state under torsion and compression-torsion paths induce both tension …
-
Finite element analysis and material property modelling of thin-strut polymeric bioresorbable scaffolds
… aims were decided upon to; (i) investigate the equivalent plastic strain (PEEQ) within the struts of BRS and its relationship with scaffold design; (ii) achieve an improved consensus upon which material model(s) may be most appropriate for capturing the mechanical response of thin-strut BRS; and …
-
A Study On The Plasticity And Fracture Behaviors Of Inconel 718 Under Multiaxial Stress And Extremely Low Cycle Fatigue Loadings
… bar specimens with different notches; (b) plane strain specimens. Experimental data of force-displacement curves and strain-life graph were plotted for analysis. The first part of this research focuses on a numerical study of monotonic tensile loading with different stress states. This part of …
-
Ultimate response of stainless steel bolted connections
… that of carbon steel, as it exhibits significant strain hardening and an absence of a well-defined yield plateau. Moreover, the design provisions of EN 1993-1-8 (2005) which was originally developed for carbon steel joints are currently applicable to design of stainless steel connections with only …
Page 1 of 2