Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 418 for “"Esd"”.

  1. ESD circuit design and measurement techniques

    … used to measure reverse recovery in a 65 nm CMOS ESD diode, and it is found that a quasi-static compact model does not accurately describe the observed transient. A non-quasi-static charge control model is used to accurately simulate both the reverse recovery and forward bias behavior. Part 2 of …

    uiuc Repository record for ESD circuit design and measurement techniques (opens in a new tab)

  2. Detection of ESD-induced soft errors

    IEC-61000-4-2 compliant ESD discharges are performed on a microcontroller. The effect of ESD-induced noise on a digital system having a workload is examined. UART interface present on-chip is used for memory and register readout. Hardware voltage monitors developed previously are included in the …

    uiuc Repository record for Detection of ESD-induced soft errors (opens in a new tab)

  3. CDM Robust & Low Noise ESD protection circuits

    … progress during last couple of decades, ESD still affects production yields, manufacturing costs, product quality, product reliability and profitability. The objective of an ESD protection circuit is to create a harmless shunting path for the static electricity before it damages the …

    waterloo Repository record for CDM Robust & Low Noise ESD protection circuits (opens in a new tab)

  4. On-Chip ESD Protection Design: Optimized Clamps

    … issues, the electrostatics discharge (ESD) might be the most common one. The peak current of electrostatics can be as high as tens of amperes and the peak voltage can be over thousand voltages. In contrast, the size of semiconductor device fabricated is continuing to scale down, making …

    ucf Repository record for On-Chip ESD Protection Design: Optimized Clamps (opens in a new tab)

  5. ESD Protected SiGe HBT RFIC Power Amplifiers

    … integrated circuits to electrostatic discharge (ESD) induced damages has justified the use of dedicated on-chip protection circuits. Design of robust protection circuits remains a challenging task because ESD failure mechanisms have become more acute as device dimensions continue to shrink. A …

    vt Repository record for ESD Protected SiGe HBT RFIC Power Amplifiers (opens in a new tab)

  6. Investigation of system-level ESD-induced failures

    Electrostatic discharge (ESD) is a phenomenon that can adversely impact the operation of systems. ESD is a short duration, high current stress which can cause the permanent failure of a system or temporary glitches in a system. Soft failures include any recoverable system malfunction, from resets …

    uiuc Repository record for Investigation of system-level ESD-induced failures (opens in a new tab)

  7. Transient Safe Operating Area (tsoa) For Esd Applications

    … pin protection in Electrostatic Discharge (ESD) time frame is developed through measurements and Technology Computer Aided Design (TCAD). A set of parameters based on transient measurements are used to define Transient Safe Operating Area (TSOA). The parameters are then used to assess …

    ucf Repository record for Transient Safe Operating Area (tsoa) For Esd Applications (opens in a new tab)

  8. Study Of Esd Effects On Rf Power Amplifiers

    Today, ESD is a major consideration in the design and manufacture of ICs. ESD problems are increasing in the electronics industry because of the increasing trend toward higher speed and smaller device sizes. There is growing interest in knowing the effects of ESD protection circuit on the …

    ucf Repository record for Study Of Esd Effects On Rf Power Amplifiers (opens in a new tab)

  9. System efficient ESD design concept for soft failures

    … methodology of studying electrostatic discharge (ESD)-induced soft failures. ESD-induced soft failures (SF) are non-destructive disruptions of the functionality of an electronic system. The soft failure robustness of a USB3 Gen 1 interface is investigated, modeled, and improved. The injection is …

    must-thes Repository record for System efficient ESD design concept for soft failures (opens in a new tab)

  10. Systematic ESD Analysis and Modeling for Electronic Device

    Systematic ESD analysis provides good pre-compliance to ESD robustness evaluation on the electronic device from device level to component/system level to on-chip level. The whole process involves corona discharge on display, system level ESD analysis on PCB for race condition and transient response …

    must-thes Repository record for Systematic ESD Analysis and Modeling for Electronic Device (opens in a new tab)

  11. Modelování a návrh ESD ochran v integrovaných obvodech

    Disertační práce představuje nové polovodičové struktury, které lze použít jako elektrostatické ochrany v integrovaných obvodech. Základem pro návrh zmíněných struktur se stala horizontální čtyřvrstvá tyristorová struktura, která byla dále modifikována tak, aby umožňovala variabilitu spouštěcího a …

    brno-tech Repository record for Modelování a návrh ESD ochran v integrovaných obvodech (opens in a new tab)

  12. Compact model of ESD diode for circuit simulation

    Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2024-12-01

    uiuc Repository record for Compact model of ESD diode for circuit simulation (opens in a new tab)

  13. High-voltage ESD PNP clamp simulation and design

    … this work high-voltage Electrostatic discharge (ESD) PNPs are studied through TCAD simulation and device measurement. PNPs for three different voltage classes, 16 V, 65 V, and 100 V, in a 0.5-µm Bipolar CMOS DMOS (BCD) technology are used as the context for the study. The PNPs are varied in …

    uiuc Repository record for High-voltage ESD PNP clamp simulation and design (opens in a new tab)

  14. Investigating soft failures induced by system-level ESD

    Hardware and application-level manifestations of ESD soft failures were characterized for three single-board computers. ESD events were generated following the system-level ESD standard (IEC 61000-4-2), matching real-world testing and events. Soft failures resulting from ESD were seen on all …

    uiuc Repository record for Investigating soft failures induced by system-level ESD (opens in a new tab)

  15. Investigation of system-level ESD induced soft failures

    Electrostatic discharge (ESD) is a common phenomenon that can have negative implications for the performance of systems during operation. ESD is a brief, high-current stress that when applied to a functional system, can cause a variety of problems ranging from temporary system malfunction to …

    uiuc Repository record for Investigation of system-level ESD induced soft failures (opens in a new tab)

  16. ESD circuit synthesis and analysis using TCAD and SPICE

    … model for an avalanche triggered SCR used for ESD protection in integrated circuits. The purpose of this work was to develop a model that accurately predicts the terminal characteristics of the SCR operating under steady state and transient conditions. Process and device simulations (using …

    rice Repository record for ESD circuit synthesis and analysis using TCAD and SPICE (opens in a new tab)

  17. System level ESD failure mechanisms, analysis and test method

    … discharge current and the transient fields of an ESD generator in the contact mode are numerically simulated using the FDTD method...The second and the third papers derived a reference ESD event for human-metal ESD from measured discharges...In the fourth paper, a three dimensional ESD scanning …

    must-thes Repository record for System level ESD failure mechanisms, analysis and test method (opens in a new tab)

  18. Modeling and Analysis Methods for ESD and EMI Problems

    <p>"Electrostatic discharge (ESD) failures and Electromagnetic interference (EMI) problems are becoming more critical in electronic devices and large systems. In this work, four studies are presented to model and analyze ESD and EMI problems.</p> <p>First, a simplified physical-based model for …

    must-thes Repository record for Modeling and Analysis Methods for ESD and EMI Problems (opens in a new tab)

Page 1 of 21