Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 63 for “"Exchange current density"”.

  1. Cermet Anodes for Solid Oxide Fuel Cells (SOFC) Systems Operating in Multiple Fuel Environments: Effects of Sulfur and Carbon Composition as well as Microstructure

    … Through EIS data, cyclic voltammetry data, the exchange current densities for these button cells were determined. Although a relatively large variation was found (expected to be due to microstructural variation) the average values for both methods of measurement is in good agreement in hydrogen. …

    ottawa-retro Repository record for Cermet Anodes for Solid Oxide Fuel Cells (SOFC) Systems Operating in Multiple Fuel Environments: Effects of Sulfur and Carbon Composition as well as Microstructure (opens in a new tab)

  2. Investigation and modeling of uranium polarization for the electrorefining of Scrap U-MO foils

    … such as Tafel constant, transfer coefficient and exchange current density are required. Uranium polarization was investigated at five temperatures and three scan rates in both the anodic and cathodic directions. Anodic polarization of uranium revealed complex behavior caused by a buildup of a …

    purdue-thes Repository record for Investigation and modeling of uranium polarization for the electrorefining of Scrap U-MO foils (opens in a new tab)

  3. Investigation Of A Biological Fuel Cell In Methane Hydrate Marine Sediment

    … quantify important system parameters including exchange current density and charge transfer coefficient; and establish baseline fuel cell power output, potential, and current density. Sediment samples used in this study were taken from sites on Blake Ridge, Cascadia Margin, and the Gulf of …

    hawaii Repository record for Investigation Of A Biological Fuel Cell In Methane Hydrate Marine Sediment (opens in a new tab)

  4. Degradation behavior of non-infiltrated and GDC-infiltrated solid oxide cells under long-term operation

    … between activation overpotential and the exchange current density of the electrode. For the fuel electrode exchange current density is proportional to the triple phase boundary (TPB) length, and the degradation of the fuel electrode was related to the changes in the exchange current …

    bu Repository record for Degradation behavior of non-infiltrated and GDC-infiltrated solid oxide cells under long-term operation (opens in a new tab)

  5. Ni, Co bei jų lydinių su volframu ir molibdenu elektronusodinimo tyrimas /

    … were obtained; the coatings deposited at low current densities have a needle- shaped surface morphology. The surface becomes more flat (spheroid structure) when current density increases. The increase in Na2MoO4 concentration up to 0.012 M results is a flat surface. For the electrodeposition …

    vilnius Repository record for Ni, Co bei jų lydinių su volframu ir molibdenu elektronusodinimo tyrimas / (opens in a new tab)

  6. The study of the electrodeposition of Ni, Co and their alloys with tungsten and molybdenum /

    … were obtained; the coatings deposited at low current densities have a needle- shaped surface morphology. The surface becomes more flat (spheroid structure) when current density increases. The increase in Na2MoO4 concentration up to 0.012 M results is a flat surface. For the electrodeposition …

    vilnius Repository record for The study of the electrodeposition of Ni, Co and their alloys with tungsten and molybdenum / (opens in a new tab)

  7. A Macroscopic Study Of The Electrochemical Modeling Parameters Of A 6 kW PEM Electrolyzer

    … electrochemistry of the process of proton exchange membrane electrolysis of a 6 kW electrolyzer manufactured by Proton Energy Systems. Each modeling parameter was examined based on the definition and the theories which characterize their behavior using experimental data generated at the …

    nodak Repository record for A Macroscopic Study Of The Electrochemical Modeling Parameters Of A 6 kW PEM Electrolyzer (opens in a new tab)

  8. Electrochemical studies of microbiologically influenced corrosion in natural freshwater system

    … was thought to be due to an increase in the exchange current density for the oxygen reaction by the oxygen catalysis mechanism. The catalysis resulted from microbial effects, and was probably associated with the presence of algae.</p>

    ut-knoxville Repository record for Electrochemical studies of microbiologically influenced corrosion in natural freshwater system (opens in a new tab)

  9. Pokročilý matematický model palivového článku modelovaný v prostředí Matlab

    This thesis presents a zerodimensional proton exchange membrane fuel cell (PEMFC) model tailored for controloriented and systemlevel simulations. The boundary conditions were considered on the stack inlets and the key parameters such as membrane resistance, exchange current density, and reactant …

    brno-tech Repository record for Pokročilý matematický model palivového článku modelovaný v prostředí Matlab (opens in a new tab)

  10. Sidabro elektronusodinimo iš sulfitinių tirpalų kinetikos tyrimas /

    … oxygen in air and relatively negligible cathodic current densities, which are too low for qualitative galvanotechnique. There are very few works dedicated to the chemistry and electrochemistry of silver sulfite complexes. Most publications related with this subject are concerned with the questions …

    vilnius Repository record for Sidabro elektronusodinimo iš sulfitinių tirpalų kinetikos tyrimas / (opens in a new tab)

  11. The kinetics of silver electrodeposition from sulfite solutions /

    … oxygen in air and relatively negligible cathodic current densities, which are too low for qualitative galvanotechnique. There are very few works dedicated to the chemistry and electrochemistry of silver sulfite complexes. Most publications related with this subject are concerned with the questions …

    vilnius Repository record for The kinetics of silver electrodeposition from sulfite solutions / (opens in a new tab)

  12. Rational Fabrication of Molybdenum Disulfide and Metal-doped Molybdenum Disulfide Thin Films via Electrodeposition Method for Energy Storage, Catalysis, and Biosensor Applications

    … catalytic activity for HER, as measured by the exchange current density, increases up to 6 atom% Ni, and then decreases slightly for 9 atom% Ni. Ni-doped MoS2 thin films were also tested in 1.0 M Na2SO4 for use within electrochemical supercapacitors, and the capacitance per unit area increases …

    siu-theses Repository record for Rational Fabrication of Molybdenum Disulfide and Metal-doped Molybdenum Disulfide Thin Films via Electrodeposition Method for Energy Storage, Catalysis, and Biosensor Applications (opens in a new tab)

  13. Identification of Material Parameters in Lithium-ion Batteries

    … parameters like the double layer capacitance, exchange current density and cathode electrolyte interface capacitance are also estimated from EIS and a comparative study between different cell chemistries is presented. The diffusion coefficients from GITT are in the order of 10−15 [m2/s] whereas …

    chalmers Repository record for Identification of Material Parameters in Lithium-ion Batteries (opens in a new tab)

  14. Cu(I) Kompleksų vaidmuo glicinatinių ir maleatinių Cu(II) kompleksų elektrocheminės redukcijos procesuose /

    … on the nature of the supporting electrolyte: the exchange current density decreases and the cathodic charge transfer coefficient increases in the sequence: Li+ - Na+ - K+ - Cs+. To enhance the Cu(I) generation in maleic acid system, the pre-electrolysis procedure was applied. It was found that its …

    vilnius Repository record for Cu(I) Kompleksų vaidmuo glicinatinių ir maleatinių Cu(II) kompleksų elektrocheminės redukcijos procesuose / (opens in a new tab)

  15. Role of Cu(I) complexes in the electrochemical reduction of glycinate and maleate Cu(II) complexes /

    … on the nature of the supporting electrolyte: the exchange current density decreases and the cathodic charge transfer coefficient increases in the sequence: Li+ - Na+ - K+ - Cs+. To enhance the Cu(I) generation in maleic acid system, the pre-electrolysis procedure was applied. It was found that its …

    vilnius Repository record for Role of Cu(I) complexes in the electrochemical reduction of glycinate and maleate Cu(II) complexes / (opens in a new tab)

  16. Current and potential distribution in electrolytic cells and Kinetic measurements of the electrolytic formation of argentous and argentic oxides in potassium hydroxide

    Current and potential distribution in electrolyte cells. A cell has been built which has two Luggin capillaries mounted on micrometer drives so that the current and potential distribution around a working electrode can be measured. The current and potential distributions for a variety of electrode …

    byu Repository record for Current and potential distribution in electrolytic cells and Kinetic measurements of the electrolytic formation of argentous and argentic oxides in potassium hydroxide (opens in a new tab)

  17. Electrochemical Studies of Cerium and Uranium in LiCl-KCl Eutectic for Fundamentals of Pyroprocessing Technology

    … methodologies for measuring and analyzing the exchange current density (i0) of U3+/U reaction, which has not been fully studied and understood in literature. In the preliminary study, cerium (Ce) was selected as a surrogate material for uranium and its behavior was being explored with the …

    vcu Repository record for Electrochemical Studies of Cerium and Uranium in LiCl-KCl Eutectic for Fundamentals of Pyroprocessing Technology (opens in a new tab)

  18. Fabrication and characterisation of Pt-Co electrocatalysts for oxygen reduction reaction in polymer electrolyte membrane fuel cells

    … performed to obtain kinetic parameters, such as, exchange current density and Tafel slopes. These electrochemical kinetic parameters determine electrocatalytic activity of the catalysts. Performances of the fabricated electrocatalysts in this work were compared with commercial electrocatalysts …

    ubc Repository record for Fabrication and characterisation of Pt-Co electrocatalysts for oxygen reduction reaction in polymer electrolyte membrane fuel cells (opens in a new tab) Download PDF for Fabrication and characterisation of Pt-Co electrocatalysts for oxygen reduction reaction in polymer electrolyte membrane fuel cells (opens in a new tab)

  19. A STUDY OF THE INTERFACIAL REACTION KINETICS IN THE IRON - CALCIUM-FLUORIDE SYSTEM AT 1450 DEGREES C

    … are largely unavailable. Consequently, the ion exchange current density and interfacial capacitance have been measured with the double pulse galvanostatic method for the anodic dissolution of an iron electrode in liquid CaF(,2) and CaF(,2)-CaO slags. Both the exchange current and capacitance are …

    mcmaster Repository record for A STUDY OF THE INTERFACIAL REACTION KINETICS IN THE IRON - CALCIUM-FLUORIDE SYSTEM AT 1450 DEGREES C (opens in a new tab)

  20. An Investigation of Low Temperature Direct Propane Fuel Cells

    … work identified some critical parameters (exchange current density, pressure, temperature) for improving the overall performance of the fuel cell. The model predictions clearly highlighted the role of catalysts in significantly enhancing the overall performance of a DPFC. Experiments were …

    ottawa-retro Repository record for An Investigation of Low Temperature Direct Propane Fuel Cells (opens in a new tab)

Page 1 of 4