Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 2409 for “"Exchanger"”.
-
Heat exchanger optimization.
… developed for the analysis of air-cooled heat exchangers and was coupled with a constrained function minimization code to produce an automated air-cooled heat exchanger design and optimization program with many new capabilities. A general iteration free approximation method was used for the …
-
HEAT EXCHANGER NETWORK RETROFITTING
Heat exchanger networks (HEN) are employed in process industries to decrease external utilities consumption and for economic and environmental sustainability. Retrofitting existing HEN can achieve significant energy savings for a relatively small investment. It is useful for numerous plants …
-
Direct contact heat exchanger development
… that guide the design of a direct contact heat exchanger for small-scale commercial and/or residential HVAC applications. Experimental data was gathered with a temperature and humidity controlled wind tunnel having a 15 cm square test section that utilized flat-fan water sprays as the working …
-
DEA degradation in heat exchanger tubes
… experiments were carried out in a coiled heat exchanger tube (2.032 mm ID, 3.175 mm OD and 4.8 m long) heated by means of a constant temperature heat transfer fluid. The operating conditions covered are: 1379 to 4137 kPa CO₂ partial pressure, 60 to 200 °C, 20 to 40 wt% DEA solutions and 0.011 …
-
Heat exchanger fouling by petroleum asphaltenes
Fouling during petroleum processing is a well documented problem. The increased use of heavy crude oils, which are rich in asphaltenes, to meet increasing energy demands has brought the severity of the problem to the fore. Petroleum asphaltenes are generally held as the main precursors of fouling …
-
Automated retrofit of heat exchanger networks
… demand often centres on retrofitting the heat exchanger network to improve heat recovery and lower the hot utility consumption. This thesis presents a comprehensive automated retrofit design method for heat exchanger networks, fulfilling several gaps in current knowledge. The novel …
-
Polymeric Hollow Fiber Heat Exchanger Design
… new knowledge about polymeric hollow fiber heat exchanger (PHFHE). The state-of-the-art study of plastic heat exchangers shows that their usage is limited by several niches where their advantages significantly dominates, or where the use of non-plastic competitors is not impossible. On the other …
-
The impacts of outdoor air conditions and non-uniform exchanger channels on a run around membrane energy exchanger
… the performance of a run-around membrane energy exchanger (RAMEE) at different outdoor air conditions and the effects of non-uniform exchanger channels. The RAMEE is a new type of building ventilation air energy recovery system that allows heat and moisture to be transferred between isolated …
-
Automotive heat exchanger air flow modeling correlations
The demands on modern automotive cooling systems have introduced the need for accurate analytical modeling techniques to aid in the cooling system design process. Two cooling airflow models have been developed to predict the flowrate and pressure drop for two particular flow effects. The first …
-
HIGH-PERFORMANCE SOLID DESICCANT-COATED HEAT EXCHANGER
… existing systems with desiccant-coated heat exchangers (DCHEs) can dehumidify the inlet air towards energy-efficient cooling. For enhanced dehumidification, this thesis presents the bottom-up development of next-generation desiccants based on MIL-101(Cr) (where MIL represents Materials …
-
Fouling of a double pipe heat exchanger
Every single heat exchanger in operation in modern industries is exposed to fouling to a greater or lesser extent depending on the surface temperature, surface condition, material of construction, fluid velocity, flow geometry and fluid composition. The fouling phenomenon is time dependent and will …
-
Hydrodynamic characteristics of a plate heat exchanger
… three-dimensional plate heat exchanger.
-
Experimental Study of Hybrid Cooled Heat Exchanger
A test system for a hybrid cooled heat exchanger was designed, and the test facility was constructed based on ASHRAE Standard 41.2-1987. A conventional air-cooled tube-fin heat exchanger was tested with and without application of wetting water. The baseline tests were conducted to investigate the …
-
PLATE HEAT EXCHANGER IMPROVEMENTS WITH SHAPE OPTIMIZATION
Plate Heat Exchangers (PHXs) are used in a wide variety of applications including, but not limited to Heating, Ventilation, Air-Conditioning, and Refrigeration (HVAC&R). PHXs are favored by the HVAC&R industry due to their compactness, flexible sizing, close approach temperature, and good heat …
Page 1 of 121