Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 224 for “"Excimer laser"”.
-
BROADBAND TUNABLE EXCIMER LASER STUDIES
… has been the studies of the broadband tunable excimer laser namely XeF(C $\to$ A). Wideband tunability of this excimer laser was first demonstrated with a simple compact dispersive stable cavity in a transverse e-beam pumped geometry. More recently, a series of experiments has been performed to …
-
Excimer laser microlithography at 193 NM
None provided.
-
Investigations into the xenon chloride excimer laser
A discharge pumped LC inversion type XeCl excimer laser was constructed, and its discharge and output were examined. A maximum output energy of 167 mJ was achieved, with an efficiency of 0.56%, using 60 psi of a gas composed of 0.56% HCl, 2.48% Xe, 48.48% He, and 48.48% Ne. The 308 nm laser output …
-
Modeling and Diagnosis of Excimer Laser Ablation
… multilayer substrate. A scanning projection excimer laser system has been utilized to fabricate the microvias. In this thesis, a novel technique implementing statistical experimental design and neural networks (NNs) is used to characterize and model the excimer laser ablation process for …
-
Corneal light scattering following excimer laser surgery
… the morphological changes in the cornea followingexcimer laser surgery.Methods Initially, the optical mechanisms of the image formation on the retina arediscussed. Following, the optical parameters of the corneal morphology are characterizedto form a theoretical model describing the forward light …
-
Optimization of ZeF(C-->A) excimer laser performance
… work has been the optimization of the XeF(C-A) laser performance and the study of the kinetic processes involved in the formation and removal of the diatomic excimer XeF(C). Significantly improved XeF(C-»A) laser performance has been achieved using e-beam excitation of a multi-component gas …
-
Compression of femtosecond krypton fluoride excimer laser pulses
Temporal characteristics of compressed femtosecond KrF pulses are measured with the help of a single-shot phase-sensitive autocorrelator for the UV. The performance of a prism compressor and the influence of higher order phase dispersion on the ultimate pulse width of compressed pulses is …
-
Amorphization of iron-boron alloys by excimer laser processing
… slightly overlapping single pulses from a XeCl excimer laser to study the extent to which amorphization occurs at extremely high heating and cooling rates. The influence of the initial microstructure and phases upon the structure that results after laser processing was also studied.</p> <p>A …
-
Excimer laser induced electrical conductivity and nanostructures in polymers
… thin film C$\sb{60}$ by means of KrF (248 nm) excimer laser irradiation has been investigated. Formation of both laser ablated surface structures and laser induced electrically conducting wires in polymers with nanometer dimensions is also demonstrated. The electrical conductivity of polymers …
-
Maskless patterning on CVD diamond films by excimer laser
Thesis (Ph. D.)--Michigan State University. Department of Materials Science and Mechanics, 2000
-
Adhesion enhancement of metal-ceramic couples using pulsed excimer laser
… enhancement obtained when metal films were laser-treated on ceramic substrates using a pulsed XeCl excimer laser. Copper films in the thickness range of 80nm and were sputter-deposited on thoroughly cleaned sapphire substrates and laser-treated in the energy density range of 0.2 to 3.5 …
-
Percolative metal-insulator transition in UV excimer laser irradiated polyimide
… transition observed in krypton-fluoride laser irradiated polyimide is used as a method to study the three dimensional percolation theory of random resistor networks. Values for the percolation threshold and conductivity critical exponent were measured and found to be 0.31 $\pm$ 0.06 for …
-
Studies of an injection controlled rare gas halide excimer laser
… electron-beam pumped XeF(C $\to$ A) excimer laser have been investigated with emphasis on efficient wideband tuning and scaling issues. Using a quasi-cw dye laser as an injection source, data were obtained that describe the laser characteristics over a wide parameter range. A high-Z …
-
Combustion diagnostics at atmospheric pressures using a tunable excimer laser
Contains fulltext : mmubn000001_148186947.pdf (Publisher’s version ) (Open Access)
-
Rapid solidification and excimer laser processing studies in iron-based alloys
… iron was irradiated using ultraviolet pulsed excimer laser wavelengths of 249nm and 308ntn, in order to study the effects of extremely high heating and cooling rates on the phase transformation sequence and upon the specimen surface. The thickness of the molten layer was found to be a function …
-
Zerebrale Revaskularisierung mittels der Excimer-Laser assistierten nicht okklusiven Anastomosierungstechnik (ELANA)
Mit der modifizierten ELANA-Technik steht ein einzigartiges, innovatives Verfahren zur Verfügung, dass es ermöglicht, intrakranielle Bypässe auch bei schwer zugänglichen und Riesenaneurysmen zu konstruieren. Vorteil dieser Technik im Vergleich zu anderen Methoden ist es, dass zunächst Anastomosen …
Page 1 of 12