Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"Exit Geometries"”.

  1. CFD modeling of entrance and exit geometries of a wind speed accelerator.

    Current wind power technology is not economically feasible throughout most of the United States due to low average wind speeds. A design for a small-scale wind concentrator device suitable for use in areas of low wind velocity was tested using computational fluid dynamics (CFD). Using a novel …

    louisville Repository record for CFD modeling of entrance and exit geometries of a wind speed accelerator. (opens in a new tab)

  2. Backward Erosion Piping

    … flume experiments. For the first time, the four exit geometries of slope, plane, slot and circle were tested in otherwise identical flumes. Experimental results and complementary numerical modelling demonstrated that exit geometries with more confined outflow areas required both lower initiation …

    unsw Repository record for Backward Erosion Piping (opens in a new tab)

  3. On the Effect of Variable Opening Geometries, and Operating Conditions on High Pressure Hydrogen Releases: Ignition Risks

    … of case studies, covering several types of exit geometries: fixed circular, and fixed elliptic openings, as well as expanding circular geometries, under different pressure conditions, to describe the properties that affect ignition and to determine when ignition has occurred. To be more …

    concordia Download PDF for On the Effect of Variable Opening Geometries, and Operating Conditions on High Pressure Hydrogen Releases: Ignition Risks (opens in a new tab)

  4. The effects of piston stroke length and exit geometry on the kinematics of vortex rings

    … between the piston stroke length and the exit geometry of a vortex generator and the dependent characteristics of a vortex ring. The vortex generator was operated with two exit geometries, one a conventional straight tube and the other a sharp edged orifice with the same exit diameter as …

    ut-knoxville Repository record for The effects of piston stroke length and exit geometry on the kinematics of vortex rings (opens in a new tab)

  5. Measurement and Modeling of Entropy Generation in Microchannels

    … and fully developed flow, entrance and exit geometries, cross-sectional shapes, aspect ratio, and different thermal boundary conditions. An experimental technique is presented that enables the measurement of the spatial istribution of entropy generation in a microchannel. The …

    waterloo Repository record for Measurement and Modeling of Entropy Generation in Microchannels (opens in a new tab)

  6. Flat Plate Film Cooling with Linear and Curved Round-to-Diffusion Shaped Slots Using PSP Measurement Technique

    … of the hole was taken as 4 mm. Three different exit geometries (Round to slot-, Round to annulus, Round to annulus2) were used with linear and projectile trajectories, thus making a total of six test plates. Results obtained agreed with the general trend of shaped holes. It is interesting to …

    tamu Repository record for Flat Plate Film Cooling with Linear and Curved Round-to-Diffusion Shaped Slots Using PSP Measurement Technique (opens in a new tab)

  7. An H -adaptive finite element compressible flow solver applied to light -gas gun design

    … to determine what effects, if any, launch tube exit geometry changes have on attitude of the projectile in flight. A comparison of two launch tube exit geometries is considered. The first case is standard muzzle geometry where the wall of the bore and the outer surface of the launch tube form a …

    unlv Repository record for An H -adaptive finite element compressible flow solver applied to light -gas gun design (opens in a new tab) Download PDF for An H -adaptive finite element compressible flow solver applied to light -gas gun design (opens in a new tab)

  8. Numerical modeling of unsteady compressible gas flow around a projectile

    … to determine what effects, if any, launch tube exit geometry changes have on attitude of the projectile in flight. A comparison of two launch tube exit geometries is considered. The first case is standard muzzle geometry where the wall of the bore and the outer surface of the launch tube form a …

    unlv Repository record for Numerical modeling of unsteady compressible gas flow around a projectile (opens in a new tab) Download PDF for Numerical modeling of unsteady compressible gas flow around a projectile (opens in a new tab)

  9. Experimental characterization of a liquid-liquid co-axial swirl rocket injector using non-invasive optical and X-ray techniques

    … An injector with five different nozzle exit geometries was designed, constructed, and implemented for these experiments. The current work was able to demonstrate that geometrical factors such as design of the recessed nozzle exit segments can be optimized to increase breakup and promote …

    iastate Repository record for Experimental characterization of a liquid-liquid co-axial swirl rocket injector using non-invasive optical and X-ray techniques (opens in a new tab)

  10. Advancing Exhaust Flow Uniformity, Operational Stability, and Total Pressure Gain of Rotating Detonation Engines for Successful Turbine Integration

    … novel RDC designs with tailored inlet and exit geometries for successful turbine integration. Firstly, RDC exit was configured with a convergent nozzle (CN) of varying RDC throat area ratio (ARC = 1.0 to 2.0) to increase the chamber pressure and total pressure gain (TPG). The 100 kHz …

    alabama Repository record for Advancing Exhaust Flow Uniformity, Operational Stability, and Total Pressure Gain of Rotating Detonation Engines for Successful Turbine Integration (opens in a new tab)

  11. Dynamics of vortex rings in cross-flow

    … to investigate the effects of different jet exit geometries on the generation, dynamics and penetration of vortex rings: one geometry was a straight walled tube, and the other was a sharp-edged orifice with the same exit diameter. Continuous pulsation was used to study its effects on the …

    utk-theses Repository record for Dynamics of vortex rings in cross-flow (opens in a new tab)

  12. The Evaluation of Time-Dependent Flow in Swirl Burners

    … as well as the injection mode, inlet length and exit geometry. The burner flow was characterised by measuring axial, tangential and radial velocities using a Laser Doppler Anemometer.<br/><br/>A Computational Fluid Dynamics modelling package, FLUENT was used to produce two and three-dimensional …

    southwales Repository record for The Evaluation of Time-Dependent Flow in Swirl Burners (opens in a new tab) Download PDF for The Evaluation of Time-Dependent Flow in Swirl Burners (opens in a new tab)

  13. Evaluating Benefits of Improved Oceanic Air Traffic and Airfield Management Through Computer Simulation

    … the Global Oceanic (GO) model and the Runway Exit Design Interactive Model (REDIM), using operational data and improved aircraft performance modeling to replicate real-world aircraft operations better and support air transportation planning and decision-making. The GO model was enhanced by …

    vt Repository record for Evaluating Benefits of Improved Oceanic Air Traffic and Airfield Management Through Computer Simulation (opens in a new tab)